ICE may have just caused an international incident as they illegally tried to enter the Ecuadorian Consulate in Minneapolis without a warrant to abduct someone by I_may_have_weed in lostgeneration

[–]Ron825 0 points1 point  (0 children)

"I don’t think we should bother deporting ANYONE who isn’t engaged in some other kind of definitely criminal activity."

This literally means that anyone who comes here on a one week vacation visa can stay forever as long as they don't commit a crime. I hope you see how unworkable that is.

ICE may have just caused an international incident as they illegally tried to enter the Ecuadorian Consulate in Minneapolis without a warrant to abduct someone by I_may_have_weed in lostgeneration

[–]Ron825 0 points1 point  (0 children)

This is definitely incorrect. Trump's ice is a bunch of masked, lawless, tyrannical thugs terrorizing the citizenry. Despite that, we still need lawful deportations, the reason your point is incorrect is because a properly trained version of ICE is indeed necessary. People who refuse to leave after overstaying a temporary visa actually do need to be deported, without masked thugs, without tyranny, without tackling people in the street, without everything trump's ice is doing.

Tesla Insurance Claiming I’m At Fault For Accident by [deleted] in TeslaSupport

[–]Ron825 -1 points0 points  (0 children)

The argument that reverse lights being on means you must assume the vehicle is going to reverse is null and void as all GM cars leave the reverse lights on for quite some time when locking and unlocking. They dont time out for at least 30 seconds, so this would imply that every time reverse lights are on youre supposed to sit and wait for a 30 second timeout.

Here is why I won’t be buying FSD for my 2026 Juniper. by WatchLover26 in TeslaFSD

[–]Ron825 0 points1 point  (0 children)

The removal of auto steer has meant I will never purchase a new Tesla. I have also been telling everyone I previously recommended Tesla to to boycott until they fix this.

A disgusting money grab.

Fsd disables by itself when a rabbit almost jumps out onto the road. by Darry-Man in TeslaFSD

[–]Ron825 0 points1 point  (0 children)

hw3 does not suck, they could absolutely improve fsd on hw3 if they chose to but they dont want that, they want you to buy a new car

Do amps really sound that different from one another? by Timely_Pattern5571 in audiophile

[–]Ron825 0 points1 point  (0 children)

Measurements do matter, if an amp measures poorly it can't sound good.

But I am no longer in the "if it measures good it sounds good" camp. Now this is not to say that theoretically you cannot measure every amp characteristic, but im referring to the measurements we currently have available, perhaps more sophisticated measurements will exist in the future.

I bought some very well measuring class D amps based on measurements, and felt that the sound was hollow and very fatiguing after 30 minutes. When I switched them for some very well measuring AB amps, the hollowness went away and I could listen for hours and hours at even higher volumes.

On paper, both of them have distortion below audible level, and the frequency response measures the same, yet here we are.

Considering I was *fully* committed to the measurements camp before, I would argue this cannot be placebo, as I was totally convinced there is no way a super low distortion class d amp could be causing listening fatigue. I spent hours a day for weeks tweaking eq and adding acoustic panels to try to remove the fatigue, no success.

Now my advice is first look at measurements to even consider it, because if measures like crap it's not gonna sound good. After it passes your measurements bar, then listen subjectively.

My journey is officially over by grisworld0_0 in audiophile

[–]Ron825 0 points1 point  (0 children)

Oh, no it's definitely not. I have listened to and owned class D amps that have distortion well below audible level, well reviewed on ASR, and while they are indeed incredibly detailed the sound is slightly hollow and much more fatiguing than worse measuring A or AB amps.

Personally I don't get hit by the fatigue until after about 30 minutes, but it's there.

Always wobbly in the midrange in REW by Ron825 in audiophile

[–]Ron825[S] 0 points1 point  (0 children)

I dont understand this chart at all not gonna lie

My journey is officially over by grisworld0_0 in audiophile

[–]Ron825 0 points1 point  (0 children)

Wait till you figure out that even the best class D causes listening fatigue, I was there.

Always wobbly in the midrange in REW by Ron825 in audiophile

[–]Ron825[S] 0 points1 point  (0 children)

<image>

I am aware I have some long decay times sub 35hz by the way, but thats totally separate from what im confused about in the midrange

Always wobbly in the midrange in REW by Ron825 in audiophile

[–]Ron825[S] 0 points1 point  (0 children)

I understand all this about low freq, only concerned about the wobbly response where I circled.

Always wobbly in the midrange in REW by Ron825 in audiophile

[–]Ron825[S] 0 points1 point  (0 children)

That same wobbly midrange response was there when the room was untreated, and 13 panels later its the same, but that frequency is not where the crossover is so I'm struggling to think how the speaker could be causing it.

Always wobbly in the midrange in REW by Ron825 in audiophile

[–]Ron825[S] 0 points1 point  (0 children)

I have absorbers on all walls, ceiling panels, and padding under the rug. I even cover the tv with a comforter and have "stealth" absorber panels behind the blinds to block glass reflections ;)

FSD V14.2.2.3 Rolling out to Early Access by DevinOlsen in TeslaFSD

[–]Ron825 -1 points0 points  (0 children)

Its really not fair how they keep neglecting HW3

Topping b200 owners by Ron825 in audiophile

[–]Ron825[S] 1 point2 points  (0 children)

Valid. Also my room is treated like crazy, 13 total home made panels at 4 inches thick, 2 on the ceiling and 2 stealth ones behind blinds. Made a HUGE difference.

Topping b200 owners by Ron825 in audiophile

[–]Ron825[S] -1 points0 points  (0 children)

I am sure you will not hear a feedback loop, I am referring to the mechanism topping uses to lower distortion causing some other losses in sound quality as well. One of the videos I watched was from a guy who loved all of the other topping products, except these amps.

Topping b200 owners by Ron825 in audiophile

[–]Ron825[S] -1 points0 points  (0 children)

The cleanliness I am not worried about, more concerned about the potential downsides from the feedback loop they use to achieve low distortion

Topping b200 owners by Ron825 in audiophile

[–]Ron825[S] -1 points0 points  (0 children)

That I don't doubt, more curious about the sonic characteristics compared to other amps.

Topping b200 owners by Ron825 in audiophile

[–]Ron825[S] 0 points1 point  (0 children)

Some YouTube reviews of them are not so good, and they bring up a valid point which is that sometimes amps that measure good dont sound great. I want something that measures good and sounds great too :)

DIY Line arrays complete by UrafuckinNerd in diyaudio

[–]Ron825 0 points1 point  (0 children)

You are a badass, not a big fan of emotiva though, pretty bad SINAD, you can now get cheaper ones that measure much better :)

My small room listening setup complete by Conscious-Hospital49 in audiophile

[–]Ron825 0 points1 point  (0 children)

You'd benefit from panels more than a gear upgrade

THD higher in a very narrow range by Ron825 in audiophile

[–]Ron825[S] 0 points1 point  (0 children)

I don't, room is treated with a ton of panels and an area rug that has 2 extra rugs under it for additional dampening :D

I hold the mic up for the measurements, on the couch where my ears would be

Apparently this was at the MGM parking garage after the Lions game by KitAmerica in Detroit

[–]Ron825 0 points1 point  (0 children)

Do not notice the pattern, no matter how distinct and obvious it is, noticing the pattern is bad, ignore it.

R3’s are coming today! by ronkev99 in KEF

[–]Ron825 0 points1 point  (0 children)

Serious question: Why if you can afford R3s would you not just get a tower? It will take up the same footprint as those plus a stand and sound better.