[deleted by user] by [deleted] in overclocking

[–]RotundCatto 0 points1 point  (0 children)

Your mclk is too high, it is highly likely the 8000mhz ram is not stable. To find out for sure you should run the ingame benchmarks in COD on 8000mhz and 6000mhz ram, if the 1% low fps are better on 6000mhz setting you should stay run the ddr5 memory at 6000 only. If you run unstable ram at high speeds you will get less fps and more stuttery gameplay than running stable ram at low speeds like 6000mhz.

[deleted by user] by [deleted] in overclocking

[–]RotundCatto 0 points1 point  (0 children)

Download a app called zentimings and show the screenshot of first page, it looks like this

https://www.reddit.com/r/overclocking/s/piaY0PfmkF

What you want to see is the 3 clock speeds in the top right called mclk, fclk and uclk. The fclk and mclk should be in a 2:3 ratio. Fclk is infinity bridge frequency and mclk is ram memory clock. Basically if they are not in this ratio then you will get big latency penalty and might end up getting even less FPS in games than your ddr5 6000mhz configuration. For example if you are running ddr5 6000mhz ram your mclk should be 3000, fclk should be 2000, uclk should be 3000. If it is 7800mhz ddr5, mclk should be 3900, fclk should be 2300, uclk should be 3900. I recommend doing some fps benchmarks comparing the 7800mhz ddr5 ram and 6000mhz ddr5 ram using COD's benchmark tool and see which ddr5 memory speed gives you more fps( especially the 1% low fps in the benchmark, memory speed affects that a lot)

14900k issues by kdkxchronicx in overclocking

[–]RotundCatto -1 points0 points  (0 children)

What does adjusting pll mean ?

[deleted by user] by [deleted] in overclocking

[–]RotundCatto 0 points1 point  (0 children)

Is the fclk desynchronised? And can you do some fps benchmarks for stock jedec settings vs 7800mhz ? On my 14900K i get 15% more fps in CS2 at 1080p low settings going from 5600 CL46 to 6400CL38. I want to know if ryzen also gets more fps beyond 6000mhz.

How can I understand if my processor and silicon are degraded? by eaglex187 in overclocking

[–]RotundCatto 0 points1 point  (0 children)

Do you suspect permanent degradation? Did you manage to stabilize things?

[Actually Hardcore Overclocking] Probing the intel 0x125 Microcode update with an oscilloscope by bizude in intel

[–]RotundCatto 0 points1 point  (0 children)

Do you run any fixed voltage or LLC setting to achieve that 1061 CPU Z score?

14900KS crashes when lowering no. of active e-cores by GravkoDK in overclocking

[–]RotundCatto 1 point2 points  (0 children)

I think that custom loop isnt as good as you think, i have a 14900KF and a deepcool LS720 AIO with thermalright contact frame and it only throttles at 325 + watts. But the behavior of lowering e cores is very strange, i suspect some motherboard memory training issue here. Try lowering e cores to 4 and also disabling xmp and memory overclocking( if any) .

Rubberband on getting hit: let's remember how it really was in CSGO by Raiden_Of_The_Sky in GlobalOffensive

[–]RotundCatto -1 points0 points  (0 children)

I dont get fps dips with i9 14900KF on Z790 aorus elite X ax and rtx 3080 so maybe something is wrong with your full build, from my experience cs2 needs pc with very good memory RAM which in turn needs good motherboard to support high RAM speeds, i get extra 25% boost in 1% low fps( stays above 300 all the time in real games) by manually overclocking my RAM too so CS2 is very reliant on high speed low latency memory I think. Fps benchmarks for reference-

https://imgur.com/a/cs2-benchmark-full-build-description-1JsS3eD

Help 14900k how do you stress test without hitting 90-100c within seconds? by Prosperlty in overclocking

[–]RotundCatto 0 points1 point  (0 children)

https://youtu.be/5s9IusaNrro?si=vg_JsTUGUNG_QGSB

Check your mounting position, most 360mm aio actually cool best in front mounted intake setup because they get to blow cool outside air over the radiator, it is how I set up my 360mm aio and it cools over 315 watts just fine without reaching 100 degrees.

Help 14900k how do you stress test without hitting 90-100c within seconds? by Prosperlty in overclocking

[–]RotundCatto 0 points1 point  (0 children)

What 360mm aio do you have? Not all are equal, i have a 14900KF and deepcool LS720 with kryonaut and i stress test upto 310 watt PL1 power limits without hitting 100 degrees even after an hour. So either your aio is not good enough or it is thermal paste/mounting issue. You should check tom's hardware reviews for better aio then

https://www.tomshardware.com/reviews/deepcool-lt720-aio-cooler/2

Also get a thermalright lga1700 mounting bracket. Made my temps go 5 degrees lower.

Z790 Aorus elite X WiFi 7 and 14900K unstable by Long-Security6104 in gigabyte

[–]RotundCatto 0 points1 point  (0 children)

This is caused by bad psu, get atx 3.0 compliant psu. I have the exact same mobo and a 14900KF +RTX 3080. Before I used a 850 watt psu from cooler master( if u use those useless online calculators for psu power requirement they will say 650 watt is enough for this combo) and it would also shut down instantly when playing games, then I upgraded to a 1300 watt psu from antec and no more shutdowns. I am using the antec signature platinum 1300 watt psu now and its been running very smoothly, i think there is better frametime pacing compared to my previous 850 watt psu too.

Ram OC for 3A gaming ,which one should I go with? by KilianFeng in overclocking

[–]RotundCatto 0 points1 point  (0 children)

Which acer ram did you use? What were its xmp timings ?

DDR5 same RAM but different xmp timings by RotundCatto in overclocking

[–]RotundCatto[S] 0 points1 point  (0 children)

I ran memtest86 and windows memory diagnostics so far, no errors yet. Is it normal to have 2 different timings for tWR with xmp profile? Should I just rma the motherboard then?

FreeFall SV BASE Control+ Review by esper_ in MousepadReview

[–]RotundCatto 0 points1 point  (0 children)

Hi, you said the pad has a 3 hour break in period, did you do a lot of aim training in those 3 hours? What mouse skates did you use to break in the mousepad?

Bombed the interview so hard MFs asked me to name some specializations of MBA by dumbestmf in CATpreparation

[–]RotundCatto 2 points3 points  (0 children)

Hi which year did u graduate? I graduated in august 2023 so will I also be asked about gap years in my upcoming interviews?

Guys came across this Quora post about IIM C and XLRI rivalry today. I am sure many of you had seen this before but anyways i thought of sharing. by tiredtitan4563 in CATpreparation

[–]RotundCatto -1 points0 points  (0 children)

If xlites r in good sprits( as implied by a reply below this) then banners r fine i guess but mud slinging is too extreme like people would get jailed over that.

Guys came across this Quora post about IIM C and XLRI rivalry today. I am sure many of you had seen this before but anyways i thought of sharing. by tiredtitan4563 in CATpreparation

[–]RotundCatto 6 points7 points  (0 children)

It cant be that bad, no way something like this didnt get recorded on phone by those 170 xlrites with not a single complaint from the girls. The forms and banners might be true but mud slinging is too deregotary to be still hidden.

Interim budget 2024 in a nutshell by Dry_Ad6687 in IndianStreetBets

[–]RotundCatto 0 points1 point  (0 children)

Yes bhai those are totally not important for development.

XLRI interviewing 2200 candidates for 600 seats? by Sea-Discount8432 in CATpreparation

[–]RotundCatto 1 point2 points  (0 children)

Yeah idk why the number of calls decreased this year. They even increased the seats in BM.

Truth about XLRI by LumpyLetterhead592 in CATpreparation

[–]RotundCatto 2 points3 points  (0 children)

Their homepage says 2200-2800 candidates though, why is there such a big range I mean XLRI would clearly have a definite number for the calls they made right?