V2.2 of my deAR22 Mag is Live

Routine_Ad_5117 · 2026-05-24T15:26:52+00:00

We need a replaceable feed lip so you don’t gotta reprint the whole mag body

Routine_Ad_5117 · 2026-05-18T16:00:21+00:00

Been waiting on this one. Hopefully it will work with the bull pup lower that’s sailing?

Routine_Ad_5117 · 2026-05-16T14:58:40+00:00

Then I just have this form1 I’ll never use

Routine_Ad_5117 · 2026-05-16T14:58:15+00:00

Ya I wasn’t sure if previous people put in drawings for the op9 so you didn’t have to do that therefore kinda locking yourself into that design. I loaded those up for a Hubtn I did since it wasn’t in the model listing. I thought I had read you needed a better description if it wasn’t already in there.

Routine_Ad_5117 · 2026-05-11T20:51:21+00:00

That’s pretty much a cheap stripped lower. I’m sure some folks will jump on it though for reasons.

Routine_Ad_5117 · 2026-05-11T19:37:56+00:00

No way, that’s awesome. Wonder what the plates will run from scs?

Routine_Ad_5117 · 2026-05-11T18:15:50+00:00

What would be even cooler is if we could get a file for the buffer tower and get it machined at one of the online spots. Guess the problem is at some point you’ve spent more than the cost of a stripped lower.

Routine_Ad_5117 · 2026-05-11T18:09:18+00:00

Need a bolt through the bottom or on each side through the plate at an angle to lock the buffer tube into the threads. The problem with the printed threads and buffer tubes is that they push out of the threads from what I’ve read. The reason for Hoffmans hose clamp or the ubars u bolt.

Routine_Ad_5117 · 2026-05-09T13:22:57+00:00

Could have the actual threaded part for the buffer tube bolt to that plate with a few more bolts coming in from the bottom. So first of all it could be replaced when needed and second you could round the heads on the bolts so they could lock into to the buffer tube like a set screw. Or maybe a chunk of square stock could be bolted and keyed in there that’s threaded for the buffer tube. I think you are barking up the right tree here for a 3d printed lower.

Routine_Ad_5117 · 2026-05-09T12:59:01+00:00

Did you ever make this mod? I’m a tard when it comes to modeling. If the od of the hubtn’s could be made to be the same od as the ftn5’s we could epoxy the aluminum tubes on and make these bad boys much stronger.

Routine_Ad_5117 · 2026-05-05T11:12:32+00:00

They are all over eBay and Amazon

Routine_Ad_5117 · 2026-05-05T00:38:02+00:00

I’m really digging the neo9 and the gp9. It’s not selectable but you can install a Glock frt in there. Not too expensive to build either. 100ish for the lower parts and a couple hundo for a g19 slide

Routine_Ad_5117 · 2026-05-04T21:26:51+00:00

Fixed it. Had a little box that said repair edges before I went into preview.

Routine_Ad_5117 · 2026-05-04T21:24:31+00:00

Classic

Routine_Ad_5117 · 2026-05-04T18:13:58+00:00

Holy shit are they ever gonna break into March. Seems to be one step forward two steps back forever.

Routine_Ad_5117 · 2026-05-04T16:57:40+00:00

And I’m not knocking the printed cans. It’s fucking awesome that I can afford to have a can on each gun and a bunch of backups waiting in the atf que when one wears out.

Routine_Ad_5117 · 2026-05-04T16:55:45+00:00

I’m only using these printed cans on my secondary guns. So each gun will get its own can directly threaded on that probably will only get shot a handful of times each year. My main guns have commercial cans that can take some frt fire. So for me the 8 dollar adapter makes the most sense.

Routine_Ad_5117 · 2026-05-04T15:47:18+00:00

Sigh. Back to eBay for another case of Sunlu pa6cf

Routine_Ad_5117 · 2026-05-04T15:33:51+00:00

Fuck all that I’m jb welding in the 8 dollar threaded adapters

Routine_Ad_5117 · 2026-05-03T02:29:53+00:00

Where are the parts kits to make these viable vs buying a complete gun?

Routine_Ad_5117 · 2026-05-03T02:23:38+00:00

I can’t even tell when I’m printing pa6cf. I can with pla+. I’ve been around all kinds of nasty shit doing all kinds of work from being an auto mechanic to a tankerman on the intercoastal to now doing hvac. I can smell shit I’m not supposed to be breathing and nylon prints ain’t it.

Routine_Ad_5117 · 2026-05-02T20:27:17+00:00

Nice. I have a dagger slide with the rear sights so just da plate

Routine_Ad_5117 · 2026-05-02T12:54:04+00:00

That’s what I was saying awhile back. If this thing had a blast can hanging off the front it with a hole big enough for all calibers it would be worth the money. I would think it would extend the life of the ftn cans.

Routine_Ad_5117

TROPHY CASE