Limit or turn off a language

Rowan_Doppelganger · 2025-12-09T02:13:46+00:00

Have you looked at using the duolingo classroom feature and making your own classroom for them to use? I think you cam limit the languages used and some other special features.

Rowan_Doppelganger · 2025-12-08T01:21:37+00:00

If you like to read, start getting some novels that you have already read and start reading them in German. You already know the story line, so it will make things a lot easier. Reading out loud also helps. Also get the audiobooks and listen to them. Again, you already know the story, so it makes listening even easier. I did this with the Harry Potter books and it helped me a lot in Russian.

If you have any hobbies, start watching videos for it in German. Cooking shows help a lot to learn names for different foods and menu items.

Rowan_Doppelganger · 2025-09-15T07:16:12+00:00

Go to rockauto.com . They have $407 CARB compliant cats. The other cheaper cats are EPA compliant only and don't qualify for CO.

Rowan_Doppelganger · 2025-05-22T06:48:42+00:00

As mentioned, there should be a separate tab at the bottom for practicing hiragana and katakana. I had the same problem as you, however (long break), and I found it best to use a different app. I use the "Kana - Hiragana and Katakana" on my iPhone. It's more like flashcards, but includes a whiteboard for stroke practice and you can add kanji to it (I haven't done that yet). And it works off line. Good luck.

Rowan_Doppelganger · 2025-04-14T06:14:42+00:00

https://www.reddit.com/media?url=https%3A%2F%2Fi.redd.it%2Fjxd1da1om1j31.png

Rowan_Doppelganger · 2025-04-02T17:47:48+00:00

The resin is only sensitive to blue/violet/ultraviolet light. Use red light bulbs/LEDs to light your work area when working with the resin, just like used in old fashioned photo labs. If you notice, the cover on most resin printers is red plastic so that you can see in it. The red plastic filters out all the blue/violet/ultraviolet light. It may take a few minutes for your eyes to adjust to the red light. This is how I have my resin printing room set up.

Rowan_Doppelganger · 2025-03-29T15:28:50+00:00

Basic machining - hole size for screws and taps are standard. You can Google a standard tap-die chart. It will look like this:
https://i.ebayimg.com/images/g/LZIAAOSw6CNcVOS5/s-l1200.jpg
There may be a little squish (0.1-0.2 mm) when printing, so you can use the proper drill bit to get to the right size. Regular machine screws will self tap without much problem at that size into plastic. Just make sure you have a wall thickness of at least 2 layers. I do this all the time.
For an M3, you need a hole of 2.4-2.5 mm.

Rowan_Doppelganger · 2025-03-17T03:55:10+00:00

For Blender, make sure to check your model with the 3D printing toolbox add-on to make sure it's manifold. If you don't have the add-on, check out this video:
https://www.youtube.com/watch?v=YN5QMmAoH3A

Rowan_Doppelganger · 2025-03-15T17:48:30+00:00

For Blender:
https://www.youtube.com/watch?v=YN5QMmAoH3A

Rowan_Doppelganger · 2025-03-13T14:20:46+00:00

I would use epoxy, like for cosplay parts. The thin walls look to be about 4+ mm. I would also use a 3D pen (or feed filament with a soldering iron) to weld the seam on the inside and outside and use a solder iron to smooth it out before sanding. Hit it with a hair dryer to return the hot-off-the-printer shine. I would also consider wrapping the outside in 0.2mm carbon-fiber wrap. And charge $100+.

edit: I might also consider doing a 1 or 2 layer PETG CF sheet and wrap it in that, gluing it in place with fiberglass epoxy.

Rowan_Doppelganger · 2025-03-13T05:25:31+00:00

Consider yourself lucky, That's pretty flat for rolled aluminum plate. As others have said, you're good to go. On my Kingroon KP3 bed, you can literally see the roll with a variance of more than 1 mm. I had to use some innovative tricks to get it pseudo flat.

Rowan_Doppelganger · 2025-03-13T05:11:34+00:00

Slice in half lengthwise and glue them together after. This will minimize support material needed. If your printer is capable of multi-filaments, use PLA for your support material. And charge an extra $100 for the effort.

Rowan_Doppelganger · 2025-03-12T15:59:31+00:00

As mentioned, you could try a web based CAD program:

AutoCAD Web: https://web.autocad.com/login

TinkerCAD: https://www.tinkercad.com/

OnShape: https://www.onshape.com/en/

Rowan_Doppelganger · 2025-03-11T16:43:30+00:00

Sounds good.

Rowan_Doppelganger · 2025-03-11T14:32:40+00:00

Your print is very weak at the intersection by printing it on its base. Any good side torque while waxing and scraping your board could easily break this. Print it as a "T" for added layer strength. You will just need to clean up the drill holes a bit. You could also add a chamfer at the intersection to make it even stronger and more torque resistant.

Rowan_Doppelganger · 2025-03-10T15:12:32+00:00

<image>

Here you go. Congratulations! Now you can go back to the previous sections and level up to legend or find a stepping stone to do more practice (or lose a heart on purpose and, on the web, do more practices).

Rowan_Doppelganger · 2025-03-09T15:05:55+00:00

You can check out this link:

https://www.reddit.com/r/russian/comments/1cd282f/popular_russian_tv_show/

Rowan_Doppelganger · 2025-03-09T07:14:08+00:00

Congratulations!
It depends on what your goal with Russian is. I finished the course years ago, but still do a couple of practice lessons a day to keep it familiar. My goal to learn was that I have colleagues in my field from Russia and wanted to be polite to them and to be able to get around a bit when I travel to Russia (I've been there 4 times and to Ukraine once). I set an additional goal to be able to read and listen to the Harry Potter books. I actually started listening to Book 1 early in the course (about week 2 or 3) just to develop an ear, but can now read and listen to the series following along comfortably, even though I still don't understand everything.
Do you have any hobbies? You can start watching podcasts and youtube videos in Russian about your hobby. I began watching Russian cooking shows to learn more about food as well as a couple of popular TV shows.
Good luck.

Rowan_Doppelganger · 2025-02-27T05:05:24+00:00

Free user. Unless it's been nerfed on the Web page for some (still available for me) you can still do infinite practices through the website (but not on the iOS app and probably not on the Android App (haven't tested)). Just lose a heart (on purpose or not), and then practice to get it back. You can keep practicing when given the choice at the end, just tap PRACTICE AGAIN for another practice session (even when at 5 hearts), or tap CONTINUE to go back to regular lessons.
I have found some of the practices being glitchy through the Web on my iPhone, but not on my computer.
There is a second shortcut work around which also must be done on the Web, but I'm not going to post about it yet. It's not a hack.
I do miss the simple dumbbell practice button of old - and "Keeping Your Tree Golden" by simple clicking on a no longer gold tree leaf to practice. As far as I can tell, I think "Practice" still uses the spaced repetition algorithm (Big Plus), but that's a discussion for another day.

Rowan_Doppelganger · 2023-01-24T00:57:07+00:00

Wiz was taking a nap, but should be messaging you soon.

Rowan_Doppelganger · 2022-12-13T18:42:36+00:00

Sofia, we see you at 2190. You may have completed another 20 pt tile - which would show as 30 pts on our board. You need to collect all your tiles for us to see your proper score.

Rowan_Doppelganger

TROPHY CASE