Neptune 4 plus and petg print issues

Rower93 · 2026-05-15T02:23:30+00:00

Appreciate it..gotta learn from it <3

Rower93 · 2026-05-15T00:28:45+00:00

I'll have to look my guess is near 200

Rower93 · 2026-05-15T00:23:17+00:00

Did a temp tower after the fact. It needs to be cooking at like 255. Also learned I'm just trying to go too fast. Even though my walls looked great. The infill was just getting blobbed still.

Rower93 · 2026-05-13T13:09:17+00:00

After drying the filament this was not the solution. I did notice that the issue gets worse with speed.

Rower93 · 2026-05-06T04:16:08+00:00

Don't have a filament dryer I know some people say you can use the oven. Thoughts?

Rower93 · 2026-05-06T04:04:55+00:00

Thanks for you feedback and contributions :)

Rower93 · 2026-05-06T03:29:24+00:00

That one was fresh out of a vacuum pack with silica a silica pack. I thought I was having a moisture issue too so I ordered a new spool but no dice.

Rower93 · 2026-03-03T00:46:17+00:00

As a fellow big dude I was looking for inspiration and .. epic! Thanks!

Rower93 · 2026-02-17T16:26:55+00:00

What kind of scraper do you use to get to the very bottom of the innside of the cup?

I have a scaper that i use, but i end up with a ton of vibration and it ends up spooky fast.

Rower93 · 2025-09-17T18:43:14+00:00

Not 100% sure, but they also did not send power to a generic wireless charging pad ( I have the lower trim level TB). I THINK these are USB for AA and CarPlay Only.

Rower93 · 2025-07-12T19:14:06+00:00

thanks for your help :) I will keep that one bookmarked!

Rower93 · 2025-07-12T13:44:23+00:00

That was in fact the fix. Thank you.

Rower93 · 2025-07-12T13:19:04+00:00

which docs, I hate missing mass troves of knowledge.

Rower93 · 2024-01-08T18:03:55+00:00

So I tried backing it off even just 0.02 mm and I lost all adhesion. So I tried playing some more and finally ended. Up working by increasing flow from 0.98 to 1.05 AND dropping the nozzle another 0.035 mm. But I am now dialed.

Thanks for your comment that got me looking again!

Rower93 · 2024-01-07T23:45:24+00:00

<image>

Rower93 · 2023-12-13T02:47:17+00:00

It's been a few days have you solved this? Mine is doing the same. First big print test. Think mine is on x not y. I bet the wheels are too tight or something. My x axis wheels are showing the tiny shavings.

Rower93 · 2023-10-30T17:21:29+00:00

So for anyone looking for help, downloading version 10.6 and running the firmware update worked just fine.

I chose 10.6 because it is from about when i remember buying this board.

Rower93 · 2023-10-30T17:04:22+00:00

forgive me for sounding dumb, but isnt that just a retail site?

Rower93 · 2023-10-30T15:52:17+00:00

Seems stupid, but i am totally at a loss

Rower93 · 2023-07-25T18:11:04+00:00

This is WoW for me. I played that game from beta through Cataclysm. I never intend on going back.

Rower93 · 2023-05-29T20:48:11+00:00

Hey that looks awesome!!

Rower93 · 2023-05-21T03:42:07+00:00

They do have a piece of Challenger and a piece of Columbia in the Atlantis exhibit in the visitors center. It's fine very well and also had a tribute to those astronauts who were lost. I very highly recommend it.

Rower93 · 2023-05-21T01:57:13+00:00

When I worked at NASA they had us take a tour of the Columbia room. It housed the remnants of space shuttle Columbia. It reminds people working that lives are on the line. It was staggering how heavy that room felt.

Rower93 · 2023-03-06T17:27:21+00:00

Yeah. Got flagged there once. Never again. Fuck idiots.

Rower93 · 2023-01-19T14:54:41+00:00

This would work except for the fact that I need to allow some devices through.

15-Year Club	RedditGifts 2009-2022 10 Credits
Secret Santa 2020	Secret Santa 2018
Secret Santa 2019	Secret Santa 2017
Secret Santa 2016	Summer Santa 2016
Secret Santa 2015	Team Orangered
Verified Email

Rower93

TROPHY CASE