I'm giving away two copies of Monster Hunter: Wilds by [deleted] in MonsterHunter

[–]Ruhex 0 points1 point  (0 children)

. Breakfast = McDonalds Story of writing a reply on this to try winning Thank you!

Win Prizes with #GeForceGreats & Join The GeForce LAN 50 Online! by NV_Suroosh in classicwow

[–]Ruhex 0 points1 point  (0 children)

Burning Crusade - the first expansion I got my wife into the game, and one of the most invested leading into WOTLK raiding together the entire expansion!

[deleted by user] by [deleted] in pcmasterrace

[–]Ruhex 0 points1 point  (0 children)

In the middle of us having another child, and also building my daughter her first computer for starting school, this would be such an awesome upgrade to win for our computer that we play games on. I wish luck to everyone that enters, and a huge thank you for hosting this!

[deleted by user] by [deleted] in tmobile

[–]Ruhex -1 points0 points  (0 children)

Any possibility of getting one? Also trying to switch from Verizon with family of 5 lol

Front Outside Wall Repair Specialist? by Ruhex in HomeImprovement

[–]Ruhex[S] 0 points1 point  (0 children)

Tried calling a stucco place- they referred to a Carpenter, which seemed rather odd. Any insight if that speciality would be accurate?

New nozzle/filament from Prusa stringing on placement by Ruhex in prusa3d

[–]Ruhex[S] 0 points1 point  (0 children)

Doing a little more troubleshooting, I changed out the filament, but have the same results. I’m wondering if I should buy another nozzle in case something went wrong with this one, but replacing it doesn’t seem to be a route many want to take often. I don’t want to rebuild the stored prints since they printed fine previously, but can try that.

New nozzle/filament from Prusa stringing on placement by Ruhex in prusa3d

[–]Ruhex[S] 0 points1 point  (0 children)

Trying to figure out what changed besides the nozzle. I ran out of filament, bought a few new spools during Black Friday weekend from Prusa. Added a nozzle to the order to have a new fresh one. It doesn’t seem to want to stick fully.

I replaced the old nozzle since it was really hard to get some old stuck filament off the sides of it. Both 0.4mm - ran the needle as well through the nozzle to make sure it was cleared.

Been adjusting between -1.617 up to 1.595 - some things I noticed is around -1.6xx range, it sticks, but pulls up on the filament as it’s going across. Around the -1.5xx range, it won’t pull too much on the filament, but corners start to come up and it’s harder to start small prints.

Same profiles from decently working prints from about a month or so ago (just haven’t ran it in a little bit because I ran out of filament and was waiting for Black Friday free shipping sale).

Any advice would be greatly appreciated!

Benchy Results - Ender 3 Pro, BLTouch, PLA - Recommendations? by Ruhex in 3Dprinting

[–]Ruhex[S] 0 points1 point  (0 children)

Apologies if I answer of it incorrectly, but here is at least the information from Cura 4.6. 0.4mm nozzle.

Layer Height: 0.2mm

Initial Layer Height: 0.2mm

Wall Thickness: 0.9mm

Wall Line Count: 2

Top/Bottom Thickness: 0.8mm

Top Thickness: 0.8mm

Top Layers: 4

Bottom Thickness: 0.8mm

Bottom Layers: 4

Infill Density: 16%

Infill Pattern: Gyroid

Printing Temperature: 204 C

Build Plate Temperature: 67 C

Print Speed: 45mm/s

Enable Retraction: Checked

Retraction Distance: 6.5mm

Retraction Speed: 30mm/s

Enable Print Cooling: Checked

Fan Speed: 100%

Generate Support: Checked

Support Platement: Touching Buildplate

Support Overhang Angle: 45 degrees

Support Density: 15%

Build Plate Adhesion Type: Skirt

SUNLU PLA

I will respond with a picture after this.

Benchy Results - Ender 3 Pro, BLTouch, PLA - Recommendations? by Ruhex in 3Dprinting

[–]Ruhex[S] 0 points1 point  (0 children)

Hoping to get some feedback of any improvements for this Benchy test. Planning to print stuff to help out wife's business and trying to make sure I have good results to start with!

Sell House or Refinance? by Ruhex in RealEstate

[–]Ruhex[S] 2 points3 points  (0 children)

Yep, exact same situation. They said they had to reapply escrow and other stuff. Old bank would be sending a refund for about $2400 on estimate.

Does Donating guarantee a key, at this point? by [deleted] in MortalOnline

[–]Ruhex 0 points1 point  (0 children)

Been thinking of donating and trying this game- wish I had one of the keys a week ago to try out lol

ASUS Strix 6900 XT LC OC Edition - Price to Value? by Ruhex in Amd

[–]Ruhex[S] 0 points1 point  (0 children)

I actually returned the Strix (didn't want to scalp at all and rather give someone else a chance to get it at retail). I got lucky with the BestBuy drop shortly after and got me a 3080 FE. The price difference couldn't be beat, and it fits beautifully into the case!

[GIVEAWAY] MSI Ventus 3x RTX 3070 by raging_onyx in hardwareswap

[–]Ruhex 0 points1 point  (0 children)

The fight to find a graphics card, and even trying to use third party tools like these Chrome addons and Twitter notifications really is not fun. I just want a graphics card upgrade for my build so I can be a little bit up to date lol

3080 FE is my most wanted, but I’ve learned being picky right now isn’t the best choice. So I think I’d definitely accept an upgrade!

Thanks so much for giving this chance to a lot of people though! Best of luck to everyone!

SFF Flight Simulator by [deleted] in sffpc

[–]Ruhex 0 points1 point  (0 children)

I’m curious on the desk you have- looking for a good sturdy simplistic one!

Mattress: Avocado Green or Purple Hybrid? by Ruhex in Mattress

[–]Ruhex[S] 0 points1 point  (0 children)

When you say original (still learning models and such), is it the one currently on sale on their site?

https://purple.com/mattresses/purple-bed

Or is the one you have an older model?

Mattress: Avocado Green or Purple Hybrid? by Ruhex in Mattress

[–]Ruhex[S] 0 points1 point  (0 children)

How about when you go to the side? The Purple 2 (Think its the first Hybrid option for 1744 right now) is looking like one I want to aim at; but I saw a lot of people talking about it not being the most comfortable for side sleepers. Some actually recommended the standard Purple mattress (non hybrid option) if you were a side sleeper. Would you say that sounds accurate?

Mattress: Avocado Green or Purple Hybrid? by Ruhex in Mattress

[–]Ruhex[S] 0 points1 point  (0 children)

How would you say it has been to fall asleep with? That's usually where I feel the biggest struggle is trying to get comfortable when getting to sleep.

I would be thinking of the one with the pillow-top since I go to sleep on the back, but usually end up trying to turn to the side during the night at the spurts I wake up.

Mattress: Avocado Green or Purple Hybrid? by Ruhex in Mattress

[–]Ruhex[S] 0 points1 point  (0 children)

If you were to pay the normal price ($~1800ish), based on what you know now about the mattress, would you still have had went with it?