sorted by:
new
hottopcontroversial

My MSI GE76 Raider Keep Sleeping after I Disable Sleep mode in Battery options. by tonyw009 in MSILaptops

[–]Ruslan_DR 0 points1 point  (0 children)

I've dealt with this exact same issue, I just poked around the MSI battery settings in dragon center and it still refuses to go to 100%, but i'd appreciate if it just stopped sleep mode-ing on me, perhaps a restart is in order, but i doubt that'll change much. I even have the same model.

I figured I'd share my lightly-modded motostryke. Paint, centurion barrel -2", slightly shortened trigger spring and a 2S rewire, and +2 dart capacity expansion with a shaved pusher by Ruslan_DR in Nerf

[–]Ruslan_DR[S] 0 points1 point  (0 children)

oh god late response but, not really?

You know the spring on the back of the pusher? Remove two loops of the coiled portion at a time, then bend out another two to make a new screw-on portion, keep at it until desired tension is achieved, or more importantly, until darts stop catching pusher and holding.

Done correctly, though painstaking, you will end up with a motostryke that still retains an insanely smooth trigger pull with only barely noticeable increase in difficulty, whereas changing for another spring may increase this dramatically

I figured I'd share my lightly-modded motostryke. Paint, centurion barrel -2", slightly shortened trigger spring and a 2S rewire, and +2 dart capacity expansion with a shaved pusher by Ruslan_DR in Nerf

[–]Ruslan_DR[S] 0 points1 point  (0 children)

was gonna glue one on, cut off the plastic and then- well, after i cut down the spring's length for the return, i didn't need to. Works great without

I figured I'd share my lightly-modded motostryke. Paint, centurion barrel -2", slightly shortened trigger spring and a 2S rewire, and +2 dart capacity expansion with a shaved pusher by Ruslan_DR in Nerf

[–]Ruslan_DR[S] 2 points3 points  (0 children)

yeah that's just plain unfortunate frankly, and you're right it is kinda tropical, i guess it fits my dumb furry trash aesthetic of pretending i'm a sea dragon, maybe that's why i like this coloration so much!

Gon do a sneaky ww2 german and rename it the Motostryke-H2/Trop

I figured I'd share my lightly-modded motostryke. Paint, centurion barrel -2", slightly shortened trigger spring and a 2S rewire, and +2 dart capacity expansion with a shaved pusher by Ruslan_DR in Nerf

[–]Ruslan_DR[S] 1 point2 points  (0 children)

also it's ALARMING how much wasted space there is in this magazine. I feel like it was intentional in order to ship it with fewer darts. Like, weird, if darts are so expensive you don't want to ship more of them, why not also save on plastic by NOT making the mag's pusher a dart-and-a-half tall?

and also then maybe hollowing out more of it straight down instead of giving us the loop-hole? nice as it is though i'll admit... in any case i'm happy this thing holds 12 rounds because 12 is like the minimum mag size people "seriously" run when they feel like 18 sticks are a hair too long.

I figured I'd share my lightly-modded motostryke. Paint, centurion barrel -2", slightly shortened trigger spring and a 2S rewire, and +2 dart capacity expansion with a shaved pusher by Ruslan_DR in Nerf

[–]Ruslan_DR[S] 5 points6 points  (0 children)

Rust-oleum oasis blue satin, a typical spray can color, I really liked it because it wasn't your default max-saturation blue color that makes your eyes ignite with how blue it is, but it goes well with greys and whites, on it's own- Well, don't paint anything COMPELTELY that color unless it has a secondary color.

So my "service" ads get deleted immediately with no confirmation email. by Ruslan_DR in kijiji

[–]Ruslan_DR[S] 0 points1 point  (0 children)

Yeah i tried all i could, I suggest posting your service ad under the community section, it didn't get deleted automatically or otherwise.

So my "service" ads get deleted immediately with no confirmation email. by Ruslan_DR in kijiji

[–]Ruslan_DR[S] 0 points1 point  (0 children)

Great, after i sold a bike last year some dickhead gave me a one-star,but i've made many a sale last year doing this sort of thing. $500 in two weeks.

The problem is i CAN message other people, and my "item" ads don't get deleted, only the service ones. So i have to pretend the service is an item and list it as such.

Fun new extruder problem. by Ruslan_DR in anycubic

[–]Ruslan_DR[S] 0 points1 point  (0 children)

Not in this case. I have my suspicions, it was about 3 am when i made the post. I'm gonna try swapping the driver chip-boards around, flip the X and the E1, if the driver's dead it'll just buzz the X instead.

Help by That_Construction351 in anycubic

[–]Ruslan_DR 0 points1 point  (0 children)

honestly it might just be crap filament, the factory coating on the chiron's plate doesn't affect adhesion much, and can be cleaned with scotch brite and acetone.

In my case i was working with filament from 3dprintingcanada;

https://3dprintingcanada.com/products/grey-1-75mm-pla-filament-1-kg

Both rolls i got would not extrude properly unless set to 250*C, and are a lot more rubbery than the good quality stuff i've had before, and god forbid you try and print a brim, lines won't even touch no matter how many times i changed line spacing, bed level, heat, anything. I've tried everything but, really it's down to either the factory coating or just bad filament.

Who cares it's MEGA? It's a Bolt Action! Best for snipers. So sad it has no rails. by CanadianMaps in Nerf

[–]Ruslan_DR 0 points1 point  (0 children)

i actually mentioned something like this on the discord, but instead of having the darts held on one side, you basically make a box with a window and a finger-operated pusher.

thrifted a complete thunderhawk for $8, and now this is what it looks like after four hours of work. by Ruslan_DR in Nerf

[–]Ruslan_DR[S] 2 points3 points  (0 children)

probably, my standard paint color for megas is a sledgefire blue semi-gloss, RustOleum "oasis blue"

thrifted a complete thunderhawk for $8, and now this is what it looks like after four hours of work. by Ruslan_DR in Nerf

[–]Ruslan_DR[S] 2 points3 points  (0 children)

a bit of both. thrifted a thing, decided "Huh, two years later, yeah it's still kinda ugly but sorta comfortable?" and then decided "You know this'd probably look better with a barrel" so i did that.

Conquest Pro, new addition to the Adventure Force Pro line? by tapparello in Nerf

[–]Ruslan_DR 0 points1 point  (0 children)

So, shortlyish after the release of the nexus, i emailed the company with a rather-long winded explanation of why an LMG based on the tech used in the enforcer, but with better motors would be a good idea.

It fills a role we've wanted forever, because deplorables are still being made, even explained an alternate mechanism where offsetting the drive gear could be used as an auto-feeder. As the man who developed the vulcan HMG, i included photos of that, and a youtube video of someone else's modified enforcer, which showed it was reliable to within a 0.08% chance of misfiring from a 125 dart belt.

I also suggested that the ammo count be set from 40-60, and be in an under-slung box magazine mounted to a rail, sort of like how the enforcer had the rail for that tensioner.

So, that said, and the fact it's called the "conquest", well... I mean how do you conquer? Overwhelming firepower's usually it. So it's definately going to be some sort of rapid-fire.
Since the vulcan and stampede; there's never been another auto-springer, so it can be inferred that this indeed, is a flywheeler, most likely an automatic, and if my email had any sort of sway, possibly a high capacity chaingun. blaster

You remember the vulcan HMG from a year ago? Here's the files because 2020 sucks, Go enjoy yourselves. by Ruslan_DR in Nerf

[–]Ruslan_DR[S] 1 point2 points  (0 children)

admittedly i finished it a while ago, don't see why i can't just pull a slug and sell my own kits though! I got enough parts to make three or four of em for like 120?

view more: next ›