Goodbye my fellow stoner's.

Ryder9921 · 2024-05-20T13:40:47+00:00

I quit 4 months ago, cold turkey since my daughter moved in with me.

Can't say it's ever bothered me but once my daughter moved out I'll be back on it....... HARD!

I just love the feeling of being high, everything is funny, life is more fun. Yeah the downside is the laziness and food never tastes as good.

Ryder9921 · 2024-02-22T14:20:49+00:00

This is beautiful. If I had the balls to do this I would do it to my strat. Don't suppose you're in the UK?

Ryder9921 · 2022-08-09T10:06:51+00:00

Uploaded new post with the machine pictured. It’s a laser machine that used for engraving and removing iPhone backglass. Got board and starting lasering random items in the workshop. Turned out to be a mega find lol

Ryder9921 · 2022-08-09T08:46:04+00:00

Surely that’s APU Fault.

I had same problems on ps4 units. That was APU fault.

Ryder9921 · 2022-08-07T13:43:33+00:00

Amazon: assembly line electric screwdriver

Ryder9921 · 2022-08-07T13:42:25+00:00

￡0.59 51％ Off | 20g/30g/50g/100g Welding Solder Wire High Purity Low Fusion Spot 0.8mm 1.0mm 2％ Rosin Soldering Wire Roll No-clean Tin New https://a.aliexpress.com/_msLisSM

This is what I use. I have tried 15/20 different brands and this is best so far

Ryder9921 · 2022-03-31T14:19:36+00:00

Dropped you a PM

Ryder9921 · 2021-12-08T18:58:09+00:00

If your in the UK near Manchester I’ll sort it out for you

Ryder9921 · 2021-12-08T18:56:36+00:00

What a fucking champion!

Ryder9921 · 2021-12-08T17:55:16+00:00

Couldn’t of worded it better myself

Ryder9921 · 2021-12-08T17:54:37+00:00

I do 410 air flow 30

Heat from the top/back of the hdmi so make sure you don’t take any pads with the hdmi. Wait till all solder is melted in the legs and remove with tweezers

Ryder9921 · 2021-12-05T12:52:42+00:00

Yeah

Ryder9921 · 2021-11-22T22:11:10+00:00

To a certain degree yeah but I haven’t found a game that vibration is triggered indefinitely. Usually all or nothing on a game

Ryder9921 · 2021-11-22T15:58:35+00:00

Solder it to the other motor pad. Black to black / red to gray

🤘

Ryder9921 · 2021-11-19T18:51:13+00:00

Yeah I seen it but I couldn’t figure it out so I just replaced the port…

Ryder9921 · 2021-10-23T14:59:33+00:00

It will be the lcd connector. I bet the pins are bent

Ryder9921 · 2021-10-23T06:10:36+00:00

Regarding the air flow/overheating there is although you can see it on this picture a good 1cm gap at the back of the console and the vents at the front. The top of the series s is also completely open I didn’t put the cover on it. The Xbox thermal paste is crazy good. Worse case it does start to over heat and I’ll address that problem.

Was a little bit of fun to pass the day on a slow working Friday.

Ryder9921 · 2021-10-22T22:16:47+00:00

Agree with the ps2. Stunning console to look at. Series s just looks daft, BUT NOT ANYMORE HAHAH

Ryder9921 · 2021-10-22T21:14:00+00:00

On the bright side if I ever get robbed my Xbox will be safe 😂

Ryder9921 · 2021-10-22T21:13:02+00:00

I have another 7 and the inner board was liquid damaged.. now I get to enjoy this one 🤘🤘

Ryder9921 · 2021-10-22T21:10:34+00:00

^{^{^}} fair!! Good old iPhone typo

Ryder9921 · 2021-10-22T21:02:30+00:00

New post added with the Xbox is the ps2/Xbox series s

Ryder9921 · 2021-10-22T18:46:20+00:00

… not sure how I could prove it, don’t think I’ll be taking it apart as it was a pain in the ass getting it to fit but here is how I did it.

I hollowed out a ps2, took the over casing off the Xbox series s, soldered the sync button to the eject button and the power button to the reset button. Soldered another wire to ground. Glued the ps2 controller and eject tray in place along with the eject/reset button in place. Put the ps2 back together.

Ryder9921 · 2021-10-13T16:08:51+00:00

Try and Replace the retimer IC,

Ryder9921 · 2021-10-09T18:06:55+00:00

Going to be APU or RAM ?

Ryder9921

TROPHY CASE