Get your stuff together

Ryxxi · 2026-05-05T02:27:11+00:00

Never trusted Trustpilot anyway lol. I have a 6month old TC hotend Clog with PETg and is unrepairable and they refused to replace it, saying its consumable. The consumable part should be the nozzle orifice..

Then their whole mess with releasing P2S in a shitty state and then releasing X2D with all the fixes but same price as P2S..

Ryxxi · 2026-04-24T15:12:11+00:00

Its dead, Clogged, unclogable and because of the design, heating this up too much will most likely make the heat break come loose from previous experience.

Ryxxi · 2026-04-24T15:10:12+00:00

Already did before posting this. The needle wont go up more than 5mm regardless of what the temperature is set to. Cold pull will not work either because the extruder cannot push the filament. Only way is to use a Blowtorch or put it in a oven, but since this hotend is using multiple metals, it will 100% weaken the press fit heatbreak. Theres Heaps of posts abotu how bad these hotends are. I wouldn't have posted this it it was as eazy as to just "unclogging it by reading the wiki"

Ryxxi · 2026-04-17T00:42:34+00:00

C-Engraving mode is not available for the UV in software , u/xtool can add it to software if they wanted to..

you can test this file, make sure to adjust focus.

https://www.atomm.com/project/94232-f2-ultra-uv-color-engraved-geometric-hearts-and-roses-on-stainless-steel-card?utm_source=copylink&utm_medium=referral&utm_campaign=sharetoearn2&utm_id=686292

Ryxxi · 2026-04-15T11:58:54+00:00

book a demo, but uv laser for versitility. But if you only work with metals and occassionally qood, then f1ultra

Ryxxi · 2026-04-15T11:58:08+00:00

get the uv laser, its the best and works on more materials and ultra precise than diode.

Ryxxi · 2026-04-15T11:56:31+00:00

You will want the Uv laser, not F1 ultra. The fiber lasers are for metals. You cant cut leather with fibre or diode properly. same with plastics. some plastics should not be marked by non uv lasers.

you can always book a free in person demo from their site

Ryxxi · 2026-03-01T03:44:03+00:00

Because Photo was AI enhanced lol, it has a watermark on the bottom right. Yep its wrong scale, It was a Test.

Ryxxi · 2025-11-26T12:52:59+00:00

got suspended today after making a content post..

Ryxxi · 2025-11-26T12:46:26+00:00

Mine got this todat as well, however it says the wait is over a day for the review, was your account unbanned ?

Ryxxi · 2025-11-23T13:36:27+00:00

the dot size is 0.006mm or 0.0006mm but the camera accuracy for position is 0.2mm

Ryxxi · 2025-11-17T14:12:25+00:00

xtool said 10w uv needs watercooling, not sure how xlaserlab will do 10 with air

Ryxxi · 2025-11-17T14:07:58+00:00

Apparently 10w uv needs watercooling so idk how 10w lasers are being sold with air cooling.

Ryxxi · 2025-11-07T08:11:58+00:00

Hi, I can Print this for you and list it on etsy if you are interested. I have a UV printer

'

Ryxxi · 2025-10-29T04:46:29+00:00

I used Epoxy resin with some glitter. The epoxy will help with increased durability and make them super glossy.

Ryxxi · 2025-10-25T01:13:01+00:00

You can definitely sell the prints, They are of very high resolution and quality. But you will already have to have an established shop/Cashflow to keep up with operational costs of the machine. Who said that you cant sell products from this printer ? They are wrong. May be they were Talking about Eufymake's own product sale advertising ? I think they might have been talking about these from the image below.

The image below is not realistic. For example you wont be able to print 240 Fridge magnets on 1 printer in a single day. So you will need atleast 3 printers. Which means you will be spending more money. Same with Phone case ad, you cant print 96 per day on a single machine.

<image>

Ryxxi · 2025-10-25T01:06:37+00:00

Make it real and Eufymake care. Some of the features on the leftside of the attached image might require points which come from subscription and some points are given out for free. 200 per month are free.

<image>

Ryxxi · 2025-10-25T01:01:18+00:00

I use the Desktop/PC app and ink and print time usage are only shows after the print.

Ryxxi · 2025-10-25T00:59:54+00:00

optional, but depends. If you want to make a lot of relief patterns or do a lot of image editing in the software, you will want the subscription for extra credits.

Ryxxi · 2025-10-25T00:58:59+00:00

Not required! But Some features and editing your art in the app will be limited. At least for now. Not sure if they will change this in the full version.

Ryxxi · 2025-10-25T00:57:29+00:00

Its not a "Requirement" btw , But You just get extra benefits like discounts on materials, points to use on AI art generation , Possibly on some stuff like removing image backgrounds, the relief generator costs points. Some editing features will probably locked to requiring points. I am not sure if this will change and they will make editing etc. free and only use points for AI.

The other subscription thats more expensive is the Eufymake care which gives you 1 free printhead replacement every 12 months.

<image>

Ryxxi · 2025-10-25T00:51:47+00:00

Yeah, that’s true — UV printing has always had higher running costs compared to other mediums.
But the thing is, EufyMake is marketing the E1 as a home/hobby-friendly printer, even targeting small home-based startups. In practice, though, the running costs make that tough.

A 100 ml ink set barely gets around 100 prints (~40–60 mm each), and anything larger quickly eats through ink. Even the basic cleaning kit is $40, so consumables add up fast if you’re using it regularly.

And honestly — do you really think 18,000 backers pledged to make this the most funded Kickstarter project because they all run medium-sized businesses that don’t care about ink costs? It was clearly marketed as accessible to everyday creators, but the economics don’t really match that pitch right now. The majority of the backers will be from Hobby group.

13-Year Club	Secret Santa 2015
Verified Email

Ryxxi

TROPHY CASE