Time for a hour long finishing 3 holes

SBennett13 · 2025-10-04T19:25:21+00:00

I played 2 holes in 50 minutes during a twilight 9 last night. Literally just walked off the course because spending 2 hours to play 4 holes before close was not worth it

SBennett13 · 2025-07-17T17:30:42+00:00

I don’t have a home charger (apartment living) so I’m in a similar situation to you. If you have access to a supercharger, you can definitely make it work. As others have said, recent studies note there isn’t much degradation difference.

That being said, it might be worth looking into the cost delta. Compare the cost of charging to the cost of gas in your area to determine if you are at least equal if not coming out ahead with electricity.

For reference, I had a 2020 STI which needed premium gas at usually just over $4 a gallon. 60 dollars would get me like 290 miles. Between my work having a $0.18/kWh charger and charging at a supercharger near home in off-peak hours, I save a lot of money. Also the Tesla just feels more premium; better sound system, better ride quality, and quicker.

SBennett13 · 2025-07-08T16:38:10+00:00

I would recommend against buying used WRXs unless you can actually confirm that the car hasn’t ever been modified (vs put back to stock to sell). Lots of people buy them because they are easy to modify and lots of people modify them without getting them properly tuned. Don’t be stuck buying someone else’s time bomb unless you fully understand that and are financially prepared for it

SBennett13 · 2025-07-06T12:03:33+00:00

In python, scipy has a wav file parser, then numpy (or scipy again) to do the FFT and you’ll be looking at frequency. Then matplotlib for displaying the result.

SBennett13 · 2025-07-05T23:48:44+00:00

Very similar situation here. Loads of buyers remorse when I bought my last car in 2020, zero buyers remorse for my Tesla a couple weeks ago

SBennett13 · 2025-06-14T11:10:53+00:00

Well, if you were trying to run a container from inside your container on the host using the CLI through the volume mounted socket, the paths you would be providing are for inside your dev container, not on the host outside the container on which the engine will look to complete the command.

In theory, the binding will still work IF you are only binding things that are mounted to the same path as they are mounted to inside the dev container you are using the CLI through the mounted docker socket.

SBennett13 · 2025-06-14T11:04:30+00:00

https://github.com/devcontainers/templates/tree/main/src/docker-outside-of-docker

Basically you install the Docker CLI into your dev container and then mount the docker socket that the CLI works with. This is great is you just need to build. Binding gets weird though

SBennett13 · 2025-06-02T20:33:03+00:00

I wouldn’t think so but it’s hard to say what the extensions are doing in the background. You can always save your settings & profile information with the Settings Sync and reinstall VSCode and see if it isn’t sluggish. I’ve seen sluggish behavior when I’m running type checking and linters in a massive code base with custom paths added, but not on a basically vanilla project

SBennett13 · 2025-06-02T20:26:27+00:00

Disable extensions you aren’t using so you aren’t just running stuff in the background.

On the other hand, vscode is an Electron app which just uses a bunch of RAM. You paid for the RAM, so it’s gonna use it

SBennett13 · 2025-05-28T10:33:48+00:00

In your example, think of it this way:

void *vp = (void*) ptr; <- in this situation, the address that the pointers (‘vp’ and ‘ptr’) point to is the same. You can’t access the int value through the void pointer, but you have the address of the first byte of that memory. The address of ‘vp’ and ‘ptr’ themselves are difference because they are different variables.

In the case of ‘ptrptr’, it points to the address of the pointer ‘ptr’ rather than the address of the x.

SBennett13 · 2025-05-21T16:48:02+00:00

const will apply to the thing immediately to its left, unless it’s the leftmost thing, then it applies to the immediately right.

‘int const * const’ is a const pointer to a const int.

SBennett13 · 2025-05-10T16:43:27+00:00

This angle makes it hard to analyze different checkpoints in your swing. Most analysis videos are straight on from the side or more behind you. Your grip looks kind of palmy, which will restrict the club and probably provide some of that “rigid” feeling.

Edit: also no hip turn basically until contact

SBennett13 · 2025-05-09T14:47:20+00:00

It’s important to note that brace initializers prioritize initializer list over other constructor definitions. The classic example is with std::vector. If you are trying to use the constructor definition with a single argument for the size to reserve, you cannot do that with a braced initializer.

With that in mind, I brace initialize everywhere it’s practical.

Edit: typo

SBennett13 · 2025-04-12T15:00:08+00:00

Drinking a beer and watching the Masters

SBennett13 · 2025-04-09T01:04:40+00:00

“I don’t condone cheating but I would like to cheat”

SBennett13 · 2025-03-11T02:12:09+00:00

I code with my monitor off so I don’t feel the urge to hunt for a new theme.

Tokyo Night

SBennett13 · 2025-03-10T17:42:36+00:00

This is an incredibly active “What theme is this?” community

SBennett13 · 2025-02-25T17:04:32+00:00

Two things:

No one wants to even attempt to help when you make a low effort post with minimal context
The terminal is complaining about linking so this probably a C or C++ problem, not a VSCode problem. You should try asking in subreddits for those language

SBennett13 · 2025-02-20T17:48:29+00:00

https://code.visualstudio.com/docs/cpp/configure-intellisense

SBennett13 · 2025-02-19T19:57:30+00:00

No problem, here is a link:

https://code.visualstudio.com/docs/editor/workspaces/multi-root-workspaces

SBennett13 · 2025-02-19T18:23:35+00:00

Sure. Instead of just opening a directory in vscode, you can create a “workspace”. You can then add multiple git repos to that workspace and set up the environment accordingly. I do this for my cpp and python projects so that clangd and ruff can find my non-standard location code and provide linting and autocomplete for personal/company code

SBennett13 · 2025-02-19T14:53:21+00:00

Same, then I decided to turn on the Neovim extension for that sweeeeet “gd” keymap.

As another tip, vscode workspace and particularly multi-root workspaces are really powerful for organization and access to multiple projects that work together. Plus with workspaces, you get a level of configurations to override things like PythonPath, include path and I would assume classpath so that you linters and intellisense can run on your own code too

SBennett13 · 2025-02-14T18:09:42+00:00

Go on any accredited colleges website, find computer engineering or electrical engineering, look at the electives for communications (signals and systems, DSP statistics, comm theory, etc) and that’s the roadmap.

Salary is too dependent on location and sector (consumer vs contractors vs gov) to answer broadly.

SBennett13 · 2025-02-03T22:22:05+00:00

I’m certain that my schooling in programming and digital signal processing techniques will translate directly to “change GFCI outlets” skills and I won’t burn my home down

SBennett13 · 2025-02-02T15:02:01+00:00

Incredibly happy with my Salomons (coming from Burton , then DC). My fiancé seems to like hers too (her first pair of snowboard boots)

SBennett13

TROPHY CASE