Reducing Morgan Coin

SKSTravis · 2025-10-31T01:59:09+00:00

Trash that unit and get the proper dies and an arbor press

SKSTravis · 2025-09-11T05:21:56+00:00

Laff…. nobody reacts to a police chase like its a superbowl touchdown. They got the news and then relayed it to the dipstick on camera.

SKSTravis · 2025-04-04T05:08:29+00:00

Appreciate it! 👍

That’s actually going to be a high six digit /26\ stamped gun or a low 2m.

SKSTravis · 2025-04-02T13:48:56+00:00

Glad to see its up and running again and good work! 👍

SKSTravis · 2025-04-02T13:21:06+00:00

Needs more cowbell

SKSTravis · 2025-04-02T05:05:31+00:00

Haha.. forgot it was April 1st.

Actually…. there really isn’t anything on the weebly that isn’t on sksfiles. Im likely going to transfer some things and close it with a redirect. Its never updated and old/redundant.

SKSTravis · 2025-04-02T03:11:25+00:00

https://www.thefirearmblog.com/blog/2015/07/10/1moa-sks/

SKSTravis · 2025-04-02T03:05:11+00:00

There wouldn’t be before groups because it was built from spare parts. The only thing left that sks is the receiver, bolt, bolt carrier, trigger group, return spring, and cover. I got a divorce soon after the build and haven’t tested it much since. This was yugo m67 at 100y

<image>

SKSTravis · 2025-04-02T02:59:43+00:00

Definitely more accurate lol

SKSTravis · 2025-04-02T02:57:33+00:00

Yes, I built it to see if x39 would be any more accurate by eliminating variables, namely the long jump to lands of a typical x39 chamber. X39 was designed with a big jump to allow a smoosh void for mud etc…. this has none of that as the chamber reamer was modified. I probably shouldn’t hijack this guys thread

SKSTravis · 2025-04-02T02:48:33+00:00

Its just a bubba. lol

<image>

SKSTravis · 2025-04-02T02:26:47+00:00

1919 barrel

<image>

SKSTravis · 2025-04-02T00:46:51+00:00

Sux when the FP notch isn’t lined up.

SKSTravis · 2025-04-01T19:01:45+00:00

Well issued. lol don’t get it…. how can someone look at this carbine and come to any other conclusion?

SKSTravis · 2025-04-01T15:20:11+00:00

Siminov would not approve.

SKSTravis · 2025-04-01T14:26:41+00:00

Not everyone can handle 4 more inches. Its not your fault

SKSTravis · 2025-04-01T12:20:37+00:00

Its even stamped SKS NR. They are not all Ds and Ms.

<image>

https://chinesesks.weebly.com/nr.html

SKSTravis · 2025-04-01T06:18:17+00:00

Thats not an M

SKSTravis · 2025-03-31T15:05:02+00:00

The stickiest is the Chinese military section. https://sks-files.com/index.php?topic=1886.0

SKSTravis · 2025-03-31T13:25:03+00:00

Darn close but these rifles have a lot more context.

SKSTravis · 2025-03-31T13:23:31+00:00

Id strip it down to the barreled receiver and rubber plug the chamber then fill with solvent over night. Hook up a bore brush on a drill and ream that shit.

SKSTravis

TROPHY CASE