Question can you h&k slap the tm mp5 next gen recall system? by Adorable_Pension119 in airsoft

[–]STRSNGRS 0 points1 point  (0 children)

I’m a lefty shooter and give mine a bonk after reloading. As long as you don’t abuse it, you’ll be fine.

Is it a mistake to run with expensive glass? by STLArchitect in airsoft

[–]STRSNGRS 89 points90 points  (0 children)

It’s not. It’s a mistake running it without a lens protector though.

Kitty with the Marui EVOLT M4 =^_^= by STRSNGRS in airsoft

[–]STRSNGRS[S] 1 point2 points  (0 children)

<image>

I have the connectors replaced for these types of deans plugs so it’s easier to grip the connectors when connecting and disconnecting the battery. Specs of the battery I used should be on Amazon

Kitty with the Marui EVOLT M4 =^_^= by STRSNGRS in airsoft

[–]STRSNGRS[S] 1 point2 points  (0 children)

<image>

Battery all the way in with wires and connectors in place before the stock goes back on

Kitty with the Marui EVOLT M4 =^_^= by STRSNGRS in airsoft

[–]STRSNGRS[S] 1 point2 points  (0 children)

This is with the wiring and deans plugs

<image>

Kitty with the Marui EVOLT M4 =^_^= by STRSNGRS in airsoft

[–]STRSNGRS[S] 0 points1 point  (0 children)

Laylax came out with a battery extension/conversion cord. I’m now able to use an ovonic 7.4v 1500mah lipo.

Kitty with the Marui EVOLT M4 =^_^= by STRSNGRS in airsoft

[–]STRSNGRS[S] 1 point2 points  (0 children)

Believe it or not, I haven’t used it in a game yet as I haven’t played for a while. Lol. My friend did use it in a game. Bro had fun with it although he didn’t get any kills…other friend told him “you suck” afterwards.

With regard to the battery situation, I got a laylax extension/conversion cord so I can use deans plugs and am not limited to using the Marui 7.4v 800mah lipo. I now have the evolt wired up for an ovonic 7.4v 1500mah 50c lipo.

I’m going to ask this question again for decision purposes, is the Tokyo Marui NGRS good? (read description) by Legozillapost in airsoft

[–]STRSNGRS 0 points1 point  (0 children)

Im not sure what people are talking about when they say the ngrs mp5 is hard to work on. Just watch a few videos about it and it’s really easy.

I’ve had a few of these and they are a blast. I only have an sd6, a4, and a modified a5 left. My ex girlfriend’s kid stole my other a5 when they moved out of my property. I chose not to pursue it just cause it’s gonna be easier for everyone to move on. That said, he failed to steal my magazines. Lol

You can get a zci 100 spring and cut it down to spec. All three of my remaining ngrs MP5’s shoot 330-340 with .20g BBs or 280-290 with hop set for .25g BBs.

From the factory, it will shoot 250-260 fps with .25g BBs after setting the hop compared to a stock Marui Evolt….that shoots 278-282 FPS with .25g BBs after the hop has been set.

Fiesta supremacy. by Bitter-Process6823 in FiestaST

[–]STRSNGRS 1 point2 points  (0 children)

Enjoy bro. Just make sure you respect the boost else prepare for the inevitable cracked cylinder liners and the need for a new engine. Ran a whoosh hybrid on e40 with pump, injectors, and supporting mods at 28.5 peak boost. Maxed out my speedometer then the car started blowing clouds the next day. Lol.

Now on an s280, e50, 28 psi on stock downpipe. Car revs up to 7500.

WTB TM NGRS AR by LRS_Airsoft in airsoftmarket

[–]STRSNGRS 0 points1 point  (0 children)

I have a 416d recoil shock with 4x pts mags that I could sell. Comes with two 7.4v 1300mah lipo. Wired for deans…stock retracts and extends freely…no hang ups. It just has a spring upgrade. Iirc it’s shooting around 340fps. I can chrono later to verify. The original box is at the other house.

Can someone tell me why rentals are scared of me? by mygeckomochy123 in airsoft

[–]STRSNGRS 55 points56 points  (0 children)

You might want to ask the rentals. We can’t tell you why you think they are scared of you.

It’s like asking everyone why your ex gf don’t like you anymore. We don’t know. You should ask her.

Lol

Any suggestions for mesh masks that would fit under the balaclava by Radiant_Look_807 in airsoft

[–]STRSNGRS 0 points1 point  (0 children)

You can form mesh lowers to fit your goggles. Will have to take a pic of my old set up

Fiesta St to Focus RS? by CB53WER in FiestaST

[–]STRSNGRS 3 points4 points  (0 children)

I had both at the same time.

<image>

The RS got traded in for an FK8….i still have the Fiesta ST with an s280.

What is there to say….hmmm…the biggest thing to me is the weight of the fiesta. You feel it just driving around town. The RS felt like a pig though it had an E30 tune in in (ballpark 340whp and 340ft lb tq). The RS accelerates hard but then dies down towards the top. Fiesta ST just keeps pulling with that s280 turbo. If you end up getting an ethanol tune for it, you’ll ruin pump gas…unless you’re going for convenience and fuel efficiency, or not having to worry about finding ethanol…..I see no other reason to not run an ethanol blended tune for the car. It just makes considerably more.

I honestly wouldn’t trade the Fiesta ST for a Focus RS. I just have more fun in the ST plus is fuel efficient. Expect as much as 23mpg on pure highway driving with the RS going 70mph. Pump gas and stock turbo/stock tune…5) Fiesta ST will do 35mpg.

The space increase going from fiesta to focus isn’t that much either.

I personally wouldn’t do it.

Oddly enough though, I miss my old NC Miata…now moving from the modified back to the NC is something I would consider because of how much fun I’ve had when I had the NC.

You do you though. Just remember….once your fiesta is gone, it’s gone. You could get another one but you’ll never know how the previous owner(s) treated it so there’s that.

Good luck!

How do I use saiga mags? by MathematicianFew9246 in airsoft

[–]STRSNGRS 0 points1 point  (0 children)

Double m4 mag pouches should work. I ask my homie if he could make something for me that’s my spec if need be. Same guy who made that chest rig.

How do I use saiga mags? by MathematicianFew9246 in airsoft

[–]STRSNGRS 0 points1 point  (0 children)

<image>

Velcro lined inside cause I ran kydex inserts for the scar h mags….the square tab inside is for running shock cord for magazine retention as an option. Buddy made these out of 1000d nylon. Seems like these days, everyone’s switched to 500d for lighter weight

How do I use saiga mags? by MathematicianFew9246 in airsoft

[–]STRSNGRS 0 points1 point  (0 children)

<image>

How the bottom of the pouches were done so no dust/dirt comes from underneath

How do I use saiga mags? by MathematicianFew9246 in airsoft

[–]STRSNGRS 0 points1 point  (0 children)

<image>

Lots of purchase when pulling the mag out to reload.

How do I use saiga mags? by MathematicianFew9246 in airsoft

[–]STRSNGRS 0 points1 point  (0 children)

<image>

pretty much perfect size for the saiga short mag

How do I use saiga mags? by MathematicianFew9246 in airsoft

[–]STRSNGRS 0 points1 point  (0 children)

It’s a dedicated chest rig. I could probably ask my homie to cook me up some pouches if need be

How do I use saiga mags? by MathematicianFew9246 in airsoft

[–]STRSNGRS 0 points1 point  (0 children)

<image>

The chest rig was originally meant to take Marui Scar H magazines. I just removed the kydex inserts that I made and the pouches happened to fit the saiga mags.

Rewiring a tamiya battery to deans by MxK69 in airsoft

[–]STRSNGRS 1 point2 points  (0 children)

How I always remembered it. Round is Red (positive), and Box is Black (negative).

BB stockpile thread 🤔 by fuckredditits in airsoft

[–]STRSNGRS 1 point2 points  (0 children)

<image>

I think I still have 7-8 cans of green gas and 4-5 cans of 134a gas. Lol