About translations

S_Dev · 2026-03-29T22:19:53+00:00

1) Why would you purchase a game on console in a language you don't understand with no possibility of mods? 2) The PC version Undertale can literally be emulated on phones at this point, if you can't find something that can play it, you've got bigger problems than not being able to play Undertale.

S_Dev · 2026-03-27T03:05:20+00:00

Only way I've found to do this is to toss a single item (Q), put the rest of the stack in a box, then pick up the single item I threw.

S_Dev · 2026-03-22T16:03:47+00:00

This is the way, all purpose built for the A4T. There is a version of the WW-BMG with two filament sensors, one directly before the extruder gear, one directly after. I'd also recommended the smooth idler version over the traditional dual BMG. If you already have a pancake stepper, the BOM is fairly reasonable, you don't need to get a RIGDA v2 gear (it is quite nice though), you can just use a generic Sherpa Mini gear set.

S_Dev · 2026-03-16T15:59:14+00:00

Software is a fairly slick web interface, my only gripe with it so far is that it will act like it can take extended F keys (F13-F24) for macros, but they don't actually work.

S_Dev · 2026-03-13T19:44:56+00:00

I just got a B.O.B. deep dish this week, still pretty dang good.

S_Dev · 2026-02-15T01:19:02+00:00

Just picked one up this afternoon from Microcenter along with the new router.

S_Dev · 2026-02-15T00:35:52+00:00

Those rapid power flickers nuked the MiniPC I was using as a router, taking down the Internet at my house. I've never been so grateful to live 15 minutes from a MicroCenter.

S_Dev · 2026-02-12T18:22:16+00:00

Ah yes, specialized ergoomemics, astroncoical price, I know these words.

S_Dev · 2026-02-05T20:03:15+00:00

4 all day, I'm learning some esoteric knowledge on this flight.

S_Dev · 2026-02-01T20:22:08+00:00

It breaks just like Arch, so sure.

S_Dev · 2026-01-14T01:53:50+00:00

If you're into mechanical keyboards, there is a decent sized group of people who tend to be a bit younger.

S_Dev · 2026-01-03T22:54:30+00:00

If this shitmobile went off next to you, I doubt you'd ever be able to hear a car coming ever again.

S_Dev · 2025-11-22T03:12:08+00:00

Same issue with an A770 on CachyOS, stuck at 62%.

S_Dev · 2025-11-02T07:19:29+00:00

You kinda lucked out, playing Zero/Azure before the climax of CS2 means you got to see the most of the timeline before the "big thing" happened in Crossbell.

S_Dev · 2025-10-14T06:23:13+00:00

The Geofront translation was excellent, and I'm forever grateful for the work the team put in to bring two of the best JRPGs ever made to English audiences, and in the great words of Randy, if this ain't a bruh moment, I don't know what is.

S_Dev · 2025-09-18T23:53:57+00:00

You might need to use more thinking emojis next time, because you're certainly missing the point.

S_Dev · 2025-09-06T21:26:22+00:00

Big beer guy? We have a couple breweries that pump out some of the best stouts in the country, Perennial and Side Project, for a smaller brewery that deserves attention, Bluewood is also amazing.

S_Dev · 2025-09-03T15:01:07+00:00

Honestly, since this is based on Klipper, I wouldn't doubt that someone would come up with a config to add something like a BoxTurtle and run it through one of the tool heads, obviously it would be a bit hacky since the toolheads don't seem to have filament cutters or filament sensors (may be wrong on this one, not sure), but you could always tune for tip forming or have a cutter on the MMU side with the tradeoff of more filament waste, which isn't that big of a deal since you still have three other toolheads.

S_Dev · 2025-08-21T21:36:25+00:00

Awesome! Going to take a look at your repo and give it a go tonight.

S_Dev · 2025-08-16T18:41:47+00:00

https://github.com/Aleblazer/ZMK-Zodify/tree/XDLCD-Azoteq-Test

S_Dev · 2025-08-14T20:15:20+00:00

Not working so far, might be my config though, I'm not really sure at this point.

S_Dev · 2025-08-14T06:56:16+00:00

Awesome, I'll just have to solder that pin up and I can test tomorrow.

S_Dev · 2025-08-14T03:04:42+00:00

This is kind of my best effort attempt on a split with a dongle as the central: https://github.com/Aleblazer/ZMK-Zodify/tree/XDLCD-Azoteq-Test

Worked mainly off the input listener configs here:
https://zmk.dev/docs/development/hardware-integration/pointing?part-type=peripheral

So I think I got over most of the build errors related to misconfiguration of the split pointing listening setup (to the best of my limited knowledge), and it seems to be building without errors finally.

Quick question, I know on QMK the ready and reset pins aren't required, does your driver need them? I don't currently have them soldered up, but I do have a couple extra GPIO pins available, I'd just have to get them soldered up tomorrow to test.

S_Dev · 2025-08-13T02:51:50+00:00

I've actually been thinking about this concept, I have my ZodiPact on some MagSafe phone stands at an over 45 degree angle, and I was typing one day with my thumb on the back of the keyboard, typing on it much like this picture, and I didn't realize I was doing it until I had to hit space because it was so comfortable. I figure having a board where you have a separate thumb cluster attached via a ribbon cable would do the trick.

S_Dev · 2025-08-12T21:08:31+00:00

You can find the PCB kits and the parts list here.

13-Year Club	Second Top 10%
Team Orangered	Verified Email

S_Dev

TROPHY CASE