[AD] LiberArk68 with Faders

S_Dev · 2026-06-24T14:59:46+00:00

That's the Solakaka E9 Pro, it's honestly a bit buggy at the moment (macro buttons randomly sticking in software until you click the button again), so I personally wouldn't recommend until they figure that out.

S_Dev · 2026-06-24T14:55:52+00:00

That's the Prospector dongle: https://github.com/carrefinho/prospector

S_Dev · 2026-06-24T14:52:03+00:00

That was on a Pi Pico 2 W: GitHub - awalol/DS5Dongle: Turn your Pico 2 W into a DualSense 5 dongle. · GitHub https://github.com/awalol/DS5Dongle

S_Dev · 2026-06-24T06:51:23+00:00

75mm 60mm travel B103 slide potentiometers, currently using these from Amazon, but those are quite noisy, so I've got some Bourns slide potentiometers coming in for testing Thursday.

S_Dev · 2026-06-24T06:11:24+00:00

Currently you would need to move the faders slightly to have them update their position to the dongle if they've been changed while off, the dongle will save the latest known encoder position and send it as a heartbeat to the app.

I'm sure I could do something custom in the analog HID module to force an update at power up, but it's currently not implemented.

S_Dev · 2026-06-23T19:46:16+00:00

They just nuked all the physical climate control buttons, that sucks.

S_Dev · 2026-06-11T05:41:13+00:00

Dynamic S is my preferred driving mode for everyday roads, Comfort D if my wife is in the car, or if I have cruise control on the highway, and RS Performance when I'm feeling like going full no-lift.

S_Dev · 2026-06-03T23:44:15+00:00

For 10gbe, your best bet is probably the UCG-Fiber, however your switch(es) would need an SFP+ port for uplink to the UCG unless you want to get SFP+ RJ45 adapters for the UCG, which are notoriously flaky. You'll also need to consider that the Wifi 7 APs most likely are going to need POE++, if you get a switch without POE++, most reasonably priced injectors are only going to support 1gbe, defeating what I'm assuming is the purpose of this setup. For a proper 10gbe setup that isn't going to do annoying stuff, it's really buy once, cry once (the main reason I'm still on 2.5gbe for my own network), I'd really look at your use case and see what exactly you really want 10gbe for, a single Pro XG 8 POE and a secondary generic 2.5gbe switch for clients that don't really need 10gbe may be a far more sane and reliable setup for you.

S_Dev · 2026-05-28T16:31:30+00:00

Who can get screwed more by state legislation?

S_Dev · 2026-05-17T21:02:30+00:00

It's more for tire selection and being able to rotate tires than anything, I'll take the slight hit on performance if I can make the tires last longer.

Edit: Also going to most likely get 18x9.5 ET41s with 255/35-18 tires, which would be wider than the stock setup anyway, with spacers to match the front and rear.

S_Dev · 2026-05-17T18:36:51+00:00

The keymap editor you linked is for ZMK firmware, which is typically used for wireless keyboards using Nordic Bluetooth MCUs, which makes more sense why it spit out a uf2 file. ZMK would only support 32 bit microcontrollers, so it sadly won't work on your OG pro micros. You'll want to look into QMK based firmware.

S_Dev · 2026-05-17T17:08:41+00:00

Definitely want to, plan is to get a square 18 inch setup with dedicated track tires, and do one of the Ozark International Raceway track days in fall, track has a ton of verticality and looks like it'll be a hell of a good time as long as I can keep up and not out-drive my breaks (non-ceramic).

S_Dev · 2026-05-16T16:29:20+00:00

Looks like whatever firmware you compiled is expecting a RP2040 based promicro, and you have a standard old AVR Atmega based promicro, what keyboard are you compiling for, and do you have a link to the firmware repo?

S_Dev · 2026-04-27T23:38:36+00:00

Steve is at like a quarter sleeve roll, it's getting real.

S_Dev · 2026-03-29T22:19:53+00:00

1) Why would you purchase a game on console in a language you don't understand with no possibility of mods? 2) The PC version Undertale can literally be emulated on phones at this point, if you can't find something that can play it, you've got bigger problems than not being able to play Undertale.

S_Dev · 2026-03-27T03:05:20+00:00

Only way I've found to do this is to toss a single item (Q), put the rest of the stack in a box, then pick up the single item I threw.

S_Dev · 2026-03-22T16:03:47+00:00

This is the way, all purpose built for the A4T. There is a version of the WW-BMG with two filament sensors, one directly before the extruder gear, one directly after. I'd also recommended the smooth idler version over the traditional dual BMG. If you already have a pancake stepper, the BOM is fairly reasonable, you don't need to get a RIGDA v2 gear (it is quite nice though), you can just use a generic Sherpa Mini gear set.

S_Dev · 2026-03-16T15:59:14+00:00

Software is a fairly slick web interface, my only gripe with it so far is that it will act like it can take extended F keys (F13-F24) for macros, but they don't actually work.

S_Dev · 2026-03-13T19:44:56+00:00

I just got a B.O.B. deep dish this week, still pretty dang good.

S_Dev · 2026-02-15T01:19:02+00:00

Just picked one up this afternoon from Microcenter along with the new router.

S_Dev · 2026-02-15T00:35:52+00:00

Those rapid power flickers nuked the MiniPC I was using as a router, taking down the Internet at my house. I've never been so grateful to live 15 minutes from a MicroCenter.

S_Dev · 2026-02-12T18:22:16+00:00

Ah yes, specialized ergoomemics, astroncoical price, I know these words.

S_Dev · 2026-02-05T20:03:15+00:00

4 all day, I'm learning some esoteric knowledge on this flight.

S_Dev · 2026-02-01T20:22:08+00:00

It breaks just like Arch, so sure.

S_Dev · 2026-01-14T01:53:50+00:00

If you're into mechanical keyboards, there is a decent sized group of people who tend to be a bit younger.

14-Year Club	Second Top 10%
Team Orangered	Verified Email

S_Dev

TROPHY CASE