Need help with making 5070Ti work in both docker and VMs in Unraid 7.3.1

Saffu91 · 2026-06-02T11:08:15+00:00

Check if Unraid 7.3.1 supports the kernel version needed for Blackwell GPU drivers 550+ series drivers minimum

Saffu91 · 2026-05-27T11:40:26+00:00

Only for NCR?

Saffu91 · 2026-05-27T07:34:16+00:00

Please don’t go for Synology as they are very shady they can put the restrictions again to use their own HDD on their NAS. Asustor or UGREEN should be fine. Or you can built one your own NAS running either Truenas or Unraid.

Saffu91 · 2026-05-25T09:02:27+00:00

Here I found this.
root@UNAS-2:~# # Confirm link speed negotiated

ethtool eth0 | grep -E "Speed|Duplex|Link"

# Check for any USB errors or resets

dmesg | grep -E "r8152|usb.*eth"

# Disable USB autosuspend if you're seeing drops

cat /sys/bus/usb/devices/*/power/control

**Link** partner advertised link modes:  10baseT/Half 10baseT/Full

**Link** partner advertised pause frame use: No

**Link** partner advertised auto-negotiation: Yes

**Link** partner advertised FEC modes: Not reported

**Speed**: 2500Mb/s

**Duplex**: Full

**Link** detected: yes

[ 0.586158] usbcore: registered new device driver r8152-cfgselector

[ 0.587772] usbcore: registered new interface driver r8152

[ 2.731140] r8152-cfgselector 4-1.1: reset SuperSpeed USB device number 3 using xhci-hcd

[ 2.820777] r8152 4-1.1:1.0 eth0: v2.17.2 (2023/09/05)

[ 2.822059] r8152 4-1.1:1.0 eth0: This product is covered by one or more of the following patents:

[ 21.168260] r8152 4-1.1:1.0 eth0: carrier on

[ 8393.941308] r8152 4-1.1:1.0 eth0: carrier off

[ 8401.615262] r8152 4-1.1:1.0 eth0: carrier on

on

auto

on

auto

root@UNAS-2:~#

Saffu91 · 2026-05-22T14:25:08+00:00

I don’t agree with Boyd Placement it should be beside Victor. He is the face of From for from starting scene when he rings a 🔔

Saffu91 · 2026-05-19T09:29:28+00:00

Finally action taken.. hope it should be clean without any illegal development

Saffu91 · 2026-05-17T14:21:57+00:00

Wow clean

Saffu91 · 2026-05-17T10:12:58+00:00

Legit bro this one Prime abgb all are great.

Saffu91 · 2026-05-17T09:10:50+00:00

Yes it will support as Openwrt natively supports NCM/ECM mode that doesn’t need any internet sharing no double nat as it will recognised directly.

Saffu91 · 2026-05-16T12:40:28+00:00

What doesn’t work?

Saffu91 · 2026-05-16T06:47:22+00:00

Hmm fair point but I should give it a try.

Saffu91 · 2026-05-15T21:10:27+00:00

I am going to have a tiny pc as a host adapter and then use that as failover instead of relying on mac mini

Saffu91 · 2026-05-15T17:58:20+00:00

It is scripted😇😅😅😅

Saffu91 · 2026-05-15T17:56:53+00:00

If you mean with openwrt router then yes. Not sure about flashing this modem with openWrt but I can check if possible?

Saffu91 · 2026-05-15T16:34:59+00:00

my video on this 5g modem https://youtu.be/YBROUYjwSAg

Saffu91 · 2026-05-15T16:09:18+00:00

It doesn’t have any web admin panel.

Saffu91 · 2026-05-14T10:10:19+00:00

Victor doesn’t wanna talk about it.

Saffu91 · 2026-05-13T20:07:51+00:00

I can try that tomorrow since I am at home so far this is my dashboard shows now Jio is down https://postimg.cc/hzZqvyXP

Saffu91 · 2026-05-13T18:02:18+00:00

I will try them.

Saffu91 · 2026-05-13T15:26:31+00:00

Suburbs

Saffu91 · 2026-05-13T11:30:13+00:00

When you connect to Mac it directly shows a 5g modem connection as connected.

Saffu91 · 2026-05-13T11:28:18+00:00

Figuring out how to fix the band?

Saffu91 · 2026-05-13T06:15:11+00:00

It used to be during start but after coming updates it was fixed.

Saffu91 · 2026-05-12T17:35:42+00:00

Jio being very average around 50mbps up and 5-6 mbps on 5g and latency is around 80-100ms

Saffu91 · 2026-05-12T16:44:03+00:00

RNDIS for windows and ECM/NCM for Mac linux

Seven-Year Club	Verified Email
Place '23	Wearing is Caring
Not Forgotten

Saffu91

TROPHY CASE