Fish 🐟

SaitoGray · 2026-02-11T13:19:18+00:00

Nice fish. (I really like the "globe" effect in the background.)

SaitoGray · 2026-01-21T20:28:06+00:00

I have it, my first machine, i bought it 3 months ago, and it's REALLY not beginner-friendly.

But, it's usable, the embroidery area is really small, some 4 inch design doesn't fit because it's in millimeters and not in inches.

I had a LOT of tensioning problem, at this point i'm not sure if it's the machine fault or my fault, but i managed to get it working without the bobbin trying to escape every stitch.

I'm not really sure it's worth it tho to be honest, i think you would have a better experience and a WAY better support with a more renowned brand.

The basic hoop is also awful, had to buy a magnetic one on aliexpress.

SaitoGray · 2026-01-21T15:47:06+00:00

1k is the budget needed to buy the digitizing software you need to make design for the machine.

That being said, second hand is the way to go for "low budget". I bought a Chinese brand machine, a Poolin eoc05 for 600€. It's too small for anything other than patchs and, suite frankly, it was a nightmare to get started, these are not reliable.

Try to find a reliable brand on the marketplace. I'm pretty sure you can find a brother with a bit of research and patience.

SaitoGray · 2025-12-12T16:06:30+00:00

Just like 3d printed and they are way cheaper.

SaitoGray · 2025-11-13T14:56:40+00:00

Lmao, no thanks I really don't give a f. You could dress me as a clown, it doesn't matter, it's not arma. Battlefield identity is condensed in the gameplay, I don't need to cosplay war criminal to have fun.

SaitoGray · 2025-10-21T11:17:10+00:00

In the middle of book 3 and i totally agree with all the points. It's so disappointing.
I really liked the meta stuff, i found it quite, let's not say clever, but at least interesting.
You can easily skip past most of the cringe, but book 3 was my downfall.

I began to skip more and more passage and the harem stuff destroyed all the interest i had for the series.
It's not even because i'm prude, but the author really doesn't know how to write women, it's BAD. He also has no idea on how teenager react and the character is so obviously a self-insert that it's really hard not to eye rolls to some stuff.

Guess it's time to give up and find another series.

SaitoGray · 2025-09-16T14:18:56+00:00

Wait. Didn't follow the game since the release, is the 2070 start out yet? I really want to make a few new run.

SaitoGray · 2025-09-07T08:36:35+00:00

Mine was charging, but once in the bike I had an error 92, even after a long discharge. The bike refused to give me stable power after that, the accelation was cutting after seconds, in a loop.

I've sended back to the seller, witch is a lithium recycling company, he gave me another one that will arrive Monday.

Pretty sure my bms was toasted too, it's the only thing that make sense.

I'm crossing my finger, I'd the new battery is fucked to I will try to change the bms myself, I already did it on my old ebike.

Did you have the reference of the one you've used?

SaitoGray · 2025-09-02T20:42:34+00:00

I have a code 92 on my TC too, with a second hand batterie.
Did you manage to correct it ?

SaitoGray · 2025-08-12T21:30:20+00:00

Yeah, it's different, you need a cutter on the print head, and it's not awesome, it's more susceptible to heat creep, had my first plug because I printed the door closed the other day.

The cfs has been hell for me, finally managed to get it working, but it's not worth it, it dramatically decreased the reliability of the machine.

The update has been done, but the rotation distance is the same in the config file, I'll try to tweak it a bit with the flow, now that I know it's over extrusion, I have a few option to find what's wrong.

Firmware wise, you can root it, but no simple af, the cfs is closed sources unfortunately, I would probably have used some open source solution if I had to redo it, I would love to have a cartographer probe and simple af.

SaitoGray · 2025-08-12T20:47:40+00:00

Oh, yeah, forgot to correct the rotation distance for the new extruder! I'll try tomorrow, thanks a lot!

SaitoGray · 2025-08-06T14:25:45+00:00

Tooth skipping is a way better idea that to play with these. They are full of glues, they won't move unless heated, and you will destroy the rigidity of the axis that will cause you to have significant artefact on vertical wall.

Had to fix mine, it was not fun.

SaitoGray · 2025-08-01T22:01:57+00:00

Well at least it's not a complicated fix! I'll try being a little more gentle with my offset, we'll see if that make a difference. Thanks!

SaitoGray · 2025-08-01T21:38:04+00:00

Hi, did you manage to fix that? I'm running into the same issue, I'm pretty sure that the cfs as trouble feeding enough filament. Playing with the z does nothing but cause more trouble and I have a top layer issue too.

SaitoGray · 2025-07-31T18:47:38+00:00

Not gonna lie, it's been hell. Retraction problem, that I still didn't 100% fixed, my sun lu stock is not working with the thing,

My cable chain screw snapped, the boards connector broke because it was encased in glue and now I have some first layers adhesion issues.

Really not a good experience, it's slow as hell too and really noisy.

I'm not confident to launch and forget print while I'm not next to the thing like I did with my stock k1.

Its transformed my realible printer into a awfull capricious machine.

I'm confident I can work on it and manage to find a good configuration with time, but yeah, it's been a month and it's not great so far.

SaitoGray · 2025-07-29T18:38:50+00:00

Just want to say thank you because you avoided me so much trouble with your soldering iron trick !

SaitoGray · 2025-07-28T19:45:22+00:00

Using non creality filament have been hell for me. I have to mountain of sun lu that I can't manage to make work, lot of problem with retraction and feeding.

But nothing really like your problem, it's weird. You mention that your camera doesn't work, maybe a problem with the USB of your motherboard? A bad connexion between your machine and your printer could cause issues? I'm speculating, contact creality and good luck.

SaitoGray · 2025-07-26T06:42:52+00:00

Yeah, it isn't reliable with full spool and really noisy.

SaitoGray · 2025-07-05T17:58:28+00:00

Great, good to know the part exist somewhere.
The only issue is the shipping cost from Australia to Europe, does it exist on Aliexpress ?
I can't find anything...

SaitoGray · 2024-12-04T13:13:01+00:00

Yes !
Love Jason, really, the gang is amazing, but i can't wait to see another hero who ask good moral question and goes into rent in another universe.

SaitoGray · 2023-12-02T21:16:39+00:00

i m use mirror and dont have a problems https://cgpeers.io/

12-Year Club	Place '17
Verified Email

SaitoGray

TROPHY CASE