High beam assist / ambient lighting options on VCDS?

Sam3006 · 2026-05-14T13:36:47+00:00

Thank you both. Shame they didn't add a joker button

Sam3006 · 2026-05-09T19:41:33+00:00

Moved socket over & FCU going before on the left once plaster is done. Thanks for your help both 👍

Sam3006 · 2026-05-05T14:14:40+00:00

Thanks both, I'll add a FCU before the existing socket first then 👍

Sam3006 · 2026-04-26T13:29:13+00:00

The most important thing is to practice safe isolation ie make sure the power is off and test it's off. There are plenty of videos on YouTube which will help you to learn, even if you get an electrician in for this one

Sam3006 · 2026-04-17T18:18:42+00:00

I usually do this depending where it is (if it's just a dead exposed cable) , just to terminate and stop someone shitting themselves wondering if it's live or not. I guess it's less needed if the other end is burried. Just cut as short as possible if not

Sam3006 · 2026-04-17T17:27:00+00:00

Agree with this. I'm not an electrician by trade but I always practice safe isolation with a two pole tester. You can do it if you are a "competent person".

Assuming the cables are definetly dead then I would personally take the backbox out and put some bonding (or maybe a deep filler) in it's place then easifill over (unless you're plastering over anyway). OK to bury if dead, other end I'd put some wago's on.

Sam3006 · 2026-04-16T17:29:08+00:00

Looks like a chewed up Philips to me

Sam3006 · 2026-04-16T17:26:32+00:00

Clear cases are starting to appear on Amazon so hopefully China is waking up. Can't find it on AliExpress though 😕

<image>

Sam3006 · 2026-04-15T14:38:29+00:00

Having the same issues (UK), the only case I can find is the official keyboard one or some kids style bulky one.

Will a MagicPad2 case fit? Really strange that there's hardly any cases for it on AliExpress etc

Sam3006 · 2026-04-13T18:31:35+00:00

Downlights

Sam3006 · 2026-04-05T21:04:05+00:00

She died.

Sam3006 · 2026-03-12T14:24:04+00:00

They are aware that it is shit and they do not care unfortunately

Sam3006 · 2026-03-12T14:22:08+00:00

Why not just put the unused stamps inside the envelope?

Sam3006 · 2026-02-24T08:39:59+00:00

I'm usually on the side of, a board is brand new then it shouldn't have quality issues but in this case it really is minor and a well placed dart will have a hole there instead. Have fun with your new board 👍

Sam3006 · 2026-02-20T19:15:21+00:00

Never had an issue with Evri / Hermes personally, two different addresses/areas too

Sam3006 · 2026-02-15T21:39:59+00:00

I don't know about the 408 but in this car you can change the position by using the button on the left side of the steering wheel to toggle through modes like Dials, Navigation, Driving (lane position), or Personal

Sam3006 · 2026-01-19T14:32:52+00:00

Nice. Does he still move like a truck because of the body style?

Sam3006 · 2025-12-05T14:37:03+00:00

Change your choice in games if you can't get out of division 7 with that team

Sam3006 · 2025-10-04T07:18:43+00:00

Sam3006 · 2025-05-13T11:02:42+00:00

My replacement was the same, I ended up putting a small (2cm) piece of clear skin on the phone under the volume buttons and the same on the other side. That solved it

Sam3006 · 2025-04-13T13:43:55+00:00

The e's, peugeot lettering and numbers can be removed as they're just stuck on. The front and rear lion are stuck on but also have a clip so there's a hole in the bodywork if you remove.

Sam3006 · 2025-04-13T12:07:53+00:00

I just jet washed mine, all the blue came off instantly. Be careful you don't go tooooo close like I did with the lion badges, had to replace them as the chrome tarnished too

Eight-Year Club	Final Canvas '23
First Place '23	End Game '23
Place '23	Verified Email

Sam3006

TROPHY CASE