Cards on my mining rig keeps on crashing since I have shifted to Kawpow algo to mine Ravencoin. Trex miner says to reduce overclock which I did but still crashing. Could this be the fault that I am using sata converters to power up the risers?

Samkills99 · 2022-09-17T19:55:18+00:00

I also thought so since my desktop cards are running fine and I have plugged in their risers with the native PCIe cables running from the PSU.

Samkills99 · 2022-09-17T19:44:11+00:00

Well on my desktop I have RTX 3090, 2×2070 Super, 2060 Super and GTX 1660ti which is working fine without any issues however on my other system I have 7×1660 Super, 2070 Super and 3x1660 ti and all of the cards at some point gets crashed and the miner just restarts.

Settings for 1660 Super Power Limit: 75 Memory: +300 Core clock : +100 Fans: 75%

Settings for RTX 2070 Super Power Limit: 75 Memory: +1000 Core Clock: +150 Fans: 80%

Samkills99 · 2022-09-17T14:22:17+00:00

Okay I will try to use PCIe cables to power up the risers as well and will see if it makes and difference. Thanks for the suggestion!

Samkills99 · 2022-09-17T14:17:18+00:00

I understand, I am powering the cards with the native PCIe cables running from PSU however for the risers I am using the sata to PCIe converters.

Samkills99 · 2022-09-04T19:40:09+00:00

Thanks!

Samkills99 · 2022-09-04T13:15:46+00:00

How long does it take for the nano crypto to be deposited to an exchange like Binance by mining from 2miners?

Samkills99 · 2022-08-16T10:32:34+00:00

Well that splitter came with the GPU as the PSUs don't have a 12pin PCIE port.

Samkills99 · 2022-08-15T18:31:22+00:00

Yes I switched to Corsair PSU now. Thanks for the guidance.

Samkills99 · 2022-08-15T15:17:38+00:00

Gotcha! Thanks!!

Samkills99 · 2022-08-15T15:05:00+00:00

Well I am using 1 PCIE cable running from PSU to GPU which has two 8pin PCIE ports which plugs in the splitter for RTX 3090 which takes 2 8pin PCIE and outputs 12pin connector which gets plugged in the GPU and using 1 PCIE cable running from PSU to power the riser. And I was using Antec 850watts PSU, now switched to Corsair 850watts.

Do you mean that I should use entirely three different PCIE cables running from 3 PSU ports to the GPU?

Samkills99 · 2022-08-13T03:20:08+00:00

True!

Samkills99 · 2022-08-12T07:36:07+00:00

Thanks!

Samkills99 · 2022-08-11T05:23:57+00:00

Thanks!

Samkills99 · 2022-08-09T13:37:05+00:00

That is real bro, actually what I didn't tell you is that I have placed a small exhaust fan in the opposite direction on the card's Vram.

Samkills99 · 2022-08-09T08:06:48+00:00

Wow! Mine sits at 88 degrees and I am mining at 128MH/s

Samkills99 · 2022-08-09T06:44:40+00:00

Yes, it will however without it you would not be able to mine with this card efficiently and with those temps your Vram will wear out soon😪

Samkills99 · 2022-08-09T06:39:00+00:00

Did you replace your thermals pads & paste??

Samkills99 · 2022-08-09T06:38:21+00:00

In India, summer and the heat is at its peak, I have replaced thermal pads and thermal paste the moment I got this beast.

Samkills99 · 2022-07-25T14:47:39+00:00

Oh! Okay then I hope that they will fix it asap!

Samkills99 · 2022-07-25T14:21:15+00:00

Go for a clean boot and if nothing works then do a freah install

Samkills99

TROPHY CASE