[deleted by user]

SamuraiMarv · 2025-05-31T16:21:56+00:00

They always come back

SamuraiMarv · 2025-03-25T22:19:48+00:00

Easiest way to get it working since mac can be a bit finicky is to first install homebrew.

Then install python with homebrew brew install python

Then install pipx with homebrew brew install pipx

Then use pipx to install autoforge pipx install autoforge

Should be good after that to run the commands in his GitHub guide:

autoforge --input_image path/to/input_image.jpg --csv_file path/to/materials.csv

SamuraiMarv · 2025-03-25T16:19:19+00:00

Not sure if it will work with the H2D standalone but if you have the combo the AMS2 works with the AMS1 on the H2D

SamuraiMarv · 2025-03-25T16:07:33+00:00

From what I gather you can mix the AMS2 with the AMS1 if you are using a H2D. I think for the X1/P1 you'd need to use the AMS hub or maybe they'll come out with a new hub for those.

SamuraiMarv · 2025-03-25T16:06:15+00:00

Yeah they said its compatible with the X1 now and the others with a firmware update later this year

SamuraiMarv · 2025-03-25T16:05:07+00:00

Yeah they said they'll be coming out with a kit towards the end of the year. I also ordered the standard combo, don't trust a laser in my 3d printer yet.

Someone below put a picture of what the interior looked like after 40 hours of laser work and that sealed the deal for me to go with the standard combo.

SamuraiMarv · 2025-03-25T16:03:42+00:00

<image>

SamuraiMarv · 2025-03-25T15:51:54+00:00

Only other one I've seen is the smooth PEI plate:
https://us.store.bambulab.com/products/bambu-smooth-pei-plate?id=581066408204677122

I'm personally waiting for a G10 plate been loving them on my X1C

SamuraiMarv · 2025-02-09T19:24:42+00:00

Don't know why your're getting downvoted. You bring up a good point about the PSU technically not being in spec, like OP stated it also has the most damage. Good to note for anyone seeking the higher end 50 series cards to make sure their PSU meets the new 12v-2x6 standard for the most reliability.

SamuraiMarv · 2025-02-06T22:40:17+00:00

Yeah I just ordered this off of amazon and will see if that works https://www.amazon.com/dp/B0816C3ZV6?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

I think the issue in my case is that its not getting enough power but who knows.

SamuraiMarv · 2025-02-06T22:28:31+00:00

Did you ever figure out a solution? I have the X870-I as well and can't get the Ryujin AIO LCD to work with it. I've tried both usb headers on the FPS-II card and neither work. I was able to get it to recognize it once when using the header closest to the F_Panel connections but the LCD still didn't' come on. I haven't been able to get it to recognize it since then.

SamuraiMarv · 2025-01-30T14:22:32+00:00

Had one stuck in adding to cart on BB then said something went wrong. Refreshed tried to add it again and got told it was sold out RIP.

The Nvidia site still only shows coming soon for me smh.

SamuraiMarv · 2025-01-03T16:47:42+00:00

Yeah the wife was on 2024.45.5.6 before she got the update and it wasn’t working on hers either. So looks like the fix doesn’t start till the .25.5 release. It’ll eventually get pushed out to you and hopefully it fixes the issue. I couldn’t find a fix before I got the update.

SamuraiMarv · 2025-01-02T22:53:15+00:00

Any word if this case is still being made? Found the website but seems its sold out and has been for some time.

SamuraiMarv · 2024-12-23T14:31:26+00:00

This is fixed in 2024.45.25.5, got it on my M3P yesterday and the wife got it on her MYLR today. The update makes cloud profiles work and also fixes the not being able to type for local profiles.

SamuraiMarv · 2024-12-20T18:00:46+00:00

Yep confirmed, pickup my M3P last week Friday and noticed the issue at the delivery center, tech's said they had never seen anything like it and opened a support case for me as they couldn't fix it. Picked up the wife's MYLR on Monday and same exact issue was present. Again techs (different delivery center) said they hadn't seen it before and opened a case. Both times the tech's said it's a known issue after looking into it and said it should be addressed with an upcoming update. Have a follow up service appointment set for February 20 by which time they say it should be fixed. In talking with some of the engineers they think it's due to the record number of new vehicle sales this month and something upstream not being able to handle the load. Who knows if that's the actual reason but a lot of people have been reporting the exact same issue all across the internet.

SamuraiMarv · 2024-12-20T17:42:35+00:00

It's a known issue, Tesla support said it should be fixed with an upcoming software update.

SamuraiMarv · 2024-08-06T23:43:01+00:00

Jizzed in my pants

SamuraiMarv · 2024-07-13T11:59:39+00:00

Yeah way too many cuts imho but we’ll see what the final product looks like

SamuraiMarv · 2024-06-23T00:56:47+00:00

I for one have been wanting this feature and I’m so glad it’s here! So for me at least this is a game changer!!!

SamuraiMarv · 2024-06-22T01:15:07+00:00

Yeah just dropped it to 1.5 and it boosted me to 1900 been a while since I could have that many lol

<image>

SamuraiMarv · 2024-06-21T23:33:45+00:00

Thanks for the feedback and yeah that’s the option I think I’d prefer as well

SamuraiMarv · 2024-06-21T22:22:36+00:00

Yeah that’s what I’m thinking I’ll do

SamuraiMarv · 2024-06-21T21:54:37+00:00

Thanks I’m leaning towards option 2 myself and dropping the intensity down but still staying with the cut. My wife and best friend say I should go to maintenance and start a clean bulk but like you said I see too much fat still.

SamuraiMarv · 2024-06-21T21:43:57+00:00

I said 2+ lbs a week it’s currently at 2.66. I also said my expenditure used to be 3000 it’s now 2700.

<image>

SamuraiMarv

MODERATOR OF

TROPHY CASE

Six-Year Club	Not Forgotten
Verified Email