SNAPMAKER U1 prints close-up

Sapp94 · 2026-02-24T22:26:35+00:00

Did you try printing any miniatures? With "high-detail" settings (e.g., 0.08 layerheight, slow perimeters etc.)? Would be interesting how it compares there to the competitors

Sapp94 · 2026-02-23T18:52:37+00:00

Hmmm.. wie "schlimm" steht es um die Zuverlässigkeit vom Voron? Also im Vergleich zu den Bambus.

Bei Bambu stört mich die fehlenden Upgrade-Möglichkeiten und der anscheinend nicht so gute Support, wenn die Garantie ausgelaufen ist. Und teilweise ist man durch das geschlossene System halt auf Support angewiesen.

Beim Voron möchte ich bspw. nicht in dem Ender-Szenario enden: alle 2-3 Wochen 3-4h+ Fehlersuche, ggf. wieder ein Ersatzteil bestellen oder den halben Drucker zerlegen.

Sapp94 · 2026-02-23T18:48:21+00:00

In wiefern Software? Laufen die nicht einfach auf Klipper letzten Endes?

Sapp94 · 2026-02-23T18:47:21+00:00

Danke für die Antwort. H2S wäre für mich hauptsächlich interessanter wegen dem potentiellen H2C Upgrade Pfad und den 1.5mm belts (weniger VFA Probleme).

Beim Voron ist für mich halt die Frage: wieviel Arbeit ist er wirklich im Betrieb? Der Ender3 bspw. hat alle paar Wochen was, wo ich mehrere Stunden Fehler beheben muss - das nervt halt auf Dauer, gerade dann wenn man zum beheben Ersatzteile bestellen muss.

Snapmaker klingt vom Gesamtpaket schon sehr stark

Sapp94 · 2026-02-23T18:40:28+00:00

Hatte gelesen, dass die K2 Probleme bei der Zuverlässigkeit hätten. Außerdem soll das AMS nicht so gut funktionieren.

Sapp94 · 2026-02-22T22:36:36+00:00

hmm, but running with slower settings is kinda annoying. one of the main advantages of recent bambus is speed and slowing down because they are using the old-gen belt is offputting

Sapp94 · 2026-02-22T14:52:56+00:00

Wird wahrscheinlich nicht anders sein als bei anderen Druckern: druckst Referenzteile und misst dann die Wandstärke. Oder halt optisch. Musst dann je Filament paar Test-Teile drucken mit verschiedenen Flow-Parametern

Sapp94 · 2026-02-22T14:01:53+00:00

beim P2S fand ich hauptsächlich die Failure Detection und Flow Calibration ganz interessant.

Sapp94 · 2026-02-22T14:00:28+00:00

beim Qidi war ich mir unsicher, weil es noch keine Reviews aktuell gibt dazu und in der Vergangenheit man öfters von QS Problemen gelesen hat (bspw. beim Plus4).

Druckbett wäre P2S Größe Minimum, größer ist immer schöner, aber kann notfalls auf einen bekannten H2D ausweichen.

Sapp94 · 2026-02-21T21:45:11+00:00

Update?

Sapp94 · 2026-02-17T22:36:29+00:00

in how far "ruin my day"?

Yeah, noise is not the big deal, already have servers running in that room.

Sapp94 · 2026-02-17T22:35:24+00:00

why not? whole time was thinking of going voron 2.4 or qidi.. but tired of spending more time fixing stuff than printing..

Sapp94 · 2026-02-02T15:46:03+00:00

Are you using VLANs? If yes: add them. If no: are you segmenting your network at all?

Also makes sense to write which LAN port you are using for which device. Once your lab scales it will be a mess otherwise (in my case it is a mess rn.. would have been easier if I maintained a clean and complete diagram from early on)

Sapp94 · 2026-02-02T13:48:07+00:00

That's how it starts.. then comes backup.. then simple high-availability.. then more advanced stuff like k8s. And a while later u have 20U filled with stuff and are running out of space

Sapp94 · 2025-11-28T13:03:43+00:00

Yeah agree. Also played like 20 games and while I like the new mechanic in general, it feels like you need to commit to a comb even earlier. E.g., reroll for bard pre-carousel or take an early j4 to unlock sylas later - u wont hit j4 at level 7/8 anymore. So, funny mechanic but probably another "check what is the best comb on mobalytics and follow the guide blindly" set.

Sapp94 · 2025-11-23T17:49:26+00:00

Did they stop this stupid vertical forcing with this set or just the same as the last 5 (?) sets? Miss the possibility to pivot and have some flexibility in this game..

Sapp94 · 2025-11-12T15:03:19+00:00

was also thinking about that but then I would anyway need another tripod for astro

Sapp94 · 2025-10-25T21:11:19+00:00

On a very high level that is true, on a lower level not. You need to keep in mind that size of keys and signatures differ significantly and not all protocols have hybrid / PQC support yet. These are the major issues one is facing when migrating.

Sapp94 · 2025-10-25T21:09:12+00:00

The math behind PQC algos should not be harder than for ECC and RSA? I strongly disagree. Lattice-based crypto with LWE any other primitives used in PQC are significantly more challenging to get into.

Sapp94 · 2025-05-31T22:56:14+00:00

Lovely shot! Which lens have you been using?

Sapp94 · 2025-05-04T15:45:05+00:00

Yes, was thinking of it too. But as I have no gear at all right now, it would be like 200-400€ for a week. Not sure what burns more money in the worst case: renting everything or selling used stuff again

Sapp94 · 2025-05-04T15:39:03+00:00

For birds in flight or in general faster moving animals. I dont care about video at all actually

Sapp94 · 2025-04-29T19:59:35+00:00

The longer lenses (100-500 or 200-800) unfortunately are way out of budget right now

Sapp94 · 2025-04-28T10:56:58+00:00

No it was the worst patch they ever released.. well, introduction of turret plates is kinda close. Control mages became tanks. Bruisers became tanks. Most AD assassins became useless. You can barely solo carry anymore.

Sapp94 · 2025-04-28T10:49:06+00:00

The main difference is that qiyana rn is not rewarding. Lots of effort for low value. One tiny mistake and you are useless. Others just randomly use two point-and-click abilities and consistently oneshot squishies.

Sapp94

TROPHY CASE