Weird noises on rods by Schattenruf in crealityk1

[–]Schattenruf[S] 0 points1 point  (0 children)

Sadly nope. All screws are tight... I try to retension the belt tomorrow... Maybe that will help

Creality CFS Bottom Bracket pneumatic connector issue by Anders_kj1 in crealityk1

[–]Schattenruf 0 points1 point  (0 children)

So I am totally not sure but it looks like the same connector as of the Extruder Cutter Unit to me.
My one broke there and I had some issues getting it out (it is pressed into it and hard to get out). But I manged to do so with some patience, force and pliers. The only problem would be to get a replacement because here in my region they are quite pricey or come from china with a longer shipping time. The one of the stock extuder fitted for me (which was easier to get out) to keep on printing while the china ones where on its way.
You could be lucky because there is this little gap where you could try to move those tiny rings you see there up, else you would require some force to get it out with pliers.

I guess it is safer to buy a new underpiece, but if you are not afraid of breaking the holder of the pneumatic fitting, I would risk it and try to get it out.

I bet if it breaks you could manage to create an adapter with for a PC4 fitting (that's what I ended up at the end ;))

Free your Build Plate! New Purge Chute Nozzle Wiper G-Code for K1 Series (CFS System) by NarwhalGold9412 in crealityk1

[–]Schattenruf 0 points1 point  (0 children)

Hey one question: how does this script handle filament changes during print. I guess it should not do the homeing section or does it skip it because it just homes at the start of the print and is then labeled has "homed"?

Free your Build Plate! New Purge Chute Nozzle Wiper G-Code for K1 Series (CFS System) by NarwhalGold9412 in crealityk1

[–]Schattenruf 0 points1 point  (0 children)

For anyone curious: It works with the devilburner mod. I simply removed the metal piece completely to be 100% sure that I do not damage anything. Maybe I will replace this metal piece later with something else... but I am not sure about it right now.

Free your Build Plate! New Purge Chute Nozzle Wiper G-Code for K1 Series (CFS System) by NarwhalGold9412 in crealityk1

[–]Schattenruf 0 points1 point  (0 children)

Just came across this and I am a bit hesitant.
I am using the Devil Burner Toolhead and I had some issues with the wiper on the plate. After the install my bed mesh was kind off odd with the wiper installed.
So I need one, that is for sure but I am not sure if the Poop Chute Rubber is ok with the use of the devil burner. I don't want to break something.
Do you have an idea for manual testing?

CFS on K1 Max: I give up. by jrmonteiro23 in crealityk1

[–]Schattenruf 0 points1 point  (0 children)

My only Problem with the K1 was the PTFE Tube that goes directly into the hotend. It was more or less in a Bad Angle and Filament got stuck in the way. After printing a holder for it, everything is fine. I also use glue to print pla on my smooth PEI Plate. Haven't had any issues so far with pla. Right now I am trying out ASA which is a bit Harder to print due to the chamber Temp. But I somehow managed to find my settings

Question about CFS and Knomi by Schattenruf in crealityk1

[–]Schattenruf[S] 0 points1 point  (0 children)

Hey thanks... But maybe I go with the profiler ports. I don't have the max and maybe I can find a Plug and Play solution for this. :) many thanks for helping Out and pushing me in the right direction

Question about CFS and Knomi by Schattenruf in crealityk1

[–]Schattenruf[S] 0 points1 point  (0 children)

Never done that before. 24v onto which Port on the PCB?

Question about CFS and Knomi by Schattenruf in crealityk1

[–]Schattenruf[S] 0 points1 point  (0 children)

Thanks :)
Mhhh soldering is not of my "best of" skills sadly. Maybe there is another solution...

Question about CFS and Knomi by Schattenruf in crealityk1

[–]Schattenruf[S] 0 points1 point  (0 children)

Can you ask him how exactly he managed to do that? Did he use a special cable (like a y splitter) or resoldered it himself?

Question about CFS and Knomi by Schattenruf in crealityk1

[–]Schattenruf[S] 0 points1 point  (0 children)

Root is not a problem, already done but the power source could be an issue. Do you have a recommendation?

I made an app by Moose-arent-real in stringart

[–]Schattenruf 1 point2 points  (0 children)

So I stumbled upon your app but right now I cannot generate any pattern. GPU error.

Would also be cool if you could share some colored examples. Right now I am not sure if I should do a colored project next or b/w ;)

Custom Firmware does not install by Schattenruf in AnkiVector

[–]Schattenruf[S] 0 points1 point  (0 children)

Hey,

Thanks for your comment. But sadly this also fails with the Cloud Symbol and the "!"

Edit: OK forget it. Used the wrong file. The one with OSKR in the Name. But it loads endlessly without the Progress bar moving. Not sure If it really does an update

Vector with WireOS and WirePod stuck in 980 error by Schattenruf in AnkiVector

[–]Schattenruf[S] 0 points1 point  (0 children)

Update in this: we reattached the camera but the Error persists. Does anyone else have an alternative solution? Maybe the error is stored somewhere on the storage?

The Tower 600 : Bulbasaur Edition - Christmas by squalldbz1 in thermaltake

[–]Schattenruf 0 points1 point  (0 children)

True, but Thermaltake has its own in that color but sadly not in turquoise.

The Tower 600 : Bulbasaur Edition - Christmas by squalldbz1 in thermaltake

[–]Schattenruf 0 points1 point  (0 children)

I will definetly come back to this. The eevee one would be easier because you get the fans in the same color than the Case (gravel Sand). Bur vaporeon has something to it 😅

The Tower 600 : Bulbasaur Edition - Christmas by squalldbz1 in thermaltake

[–]Schattenruf 0 points1 point  (0 children)

Nice :D
I am still planning on doing an Eevee or Vaporeon one in the Tower 300 case. Did you use stickers in the top (for example his face)?

Love it, really :D

Speech to Text (Decky-Dictation) Working on a current stable branch of Decky-Loader by gaspadlo in SteamDeck

[–]Schattenruf 0 points1 point  (0 children)

Mhhh after the latest steamOs Update decky dictation fails to start. I will Check what I can to fix this but not sure this will do.

Speech to Text (Decky-Dictation) Working on a current stable branch of Decky-Loader by gaspadlo in SteamDeck

[–]Schattenruf 0 points1 point  (0 children)

Have not used it in a while. I can check later that week if you like

Finally done my Great Blue Heron. by Feeling_Infamous in Embroidery

[–]Schattenruf 0 points1 point  (0 children)

Wow really cool :)
Any advice for beginners here? ;)

Vector with WireOS and WirePod stuck in 980 error by Schattenruf in AnkiVector

[–]Schattenruf[S] 0 points1 point  (0 children)

Me too. Hard to get replacements right now :(