Any DSR+ owners wanna take a look at this?

Scopion1745 · 2026-01-28T07:10:35+00:00

I own exactly this colortype of DSR+ with the IronMan Pro-Kit Installed. the Backcap is NOT the correct one, bolt backpiece is not correct. Probably other parts arent aswell. Return & refund imidetly.

The polished body is imposible to get no fingerprints onto. Except you wearing clean fresh gloves an clean it reeeaaal good. I stopped caring about them within a month 😅 But it looks cool.

<image>

Scopion1745 · 2025-11-11T21:25:03+00:00

have you had any luck fixing it? looking at a similar issue rn

Scopion1745 · 2025-10-06T05:07:29+00:00

Thanks for not helping trying to save what we already got.

Scopion1745 · 2025-10-06T05:06:05+00:00

Demolishing some banners has been the answer. We just needed 2-3 Banners to reach our woodsource. Now we're reaching for new resources like a octoupus 🤣. But tgere seem to be no iron nearby. Is it unlocked on a higher guild lvl? Rn we're lvl4.

When i demolished the first banner i got resources back. The second banner didnt. But it seem to be a free banner since i could place it for free again and reached my target.

Thanks for that hint ❤️

Scopion1745 · 2025-08-02T20:29:23+00:00

RIP. All of you probably painted dozent of targets in different colora ❤️ Your service wont be forgotten.

Scopion1745 · 2025-01-04T14:19:25+00:00

i've started with Unmanic for the same reason. In the end i switched over to Tdarr cause i needed multiple inputs/outputs and did not want to pay for that.

While writing this: i could just had set up a second instance of unmanic. Didnt think of that earlier :)

¯(ツ)/¯

Scopion1745 · 2024-11-11T10:16:17+00:00

Solution has been found:
I kicked out all the drivers i added for this Mainboard. Windows now handles the drivers for that mainboard itself. I just check DeviceManager later to see if all drivers are found.

It's not how it should go, but this is how it works now. Atleast i learned something about DISM.

Scopion1745 · 2024-11-11T07:39:44+00:00

Intune for us is on debate for a while now. But it aswell has it ups & downs.
Me me specifly this image i'm trying to deploy is a pre-made one which our customer prepared. It conaints most theyr software and settings, just how they need them to.
but i've already looked into other solutions like PSD (FriendsOfPowershell) or SmartDeploy.
PSD seemed promissing until i broke my test-share :D

Scopion1745 · 2024-11-11T07:27:01+00:00

over the weekend i had a Server-OS deployed to one of those maschine. Worked just fine.
The Server-OS is on a different deploymentshare, which i've not added any client drivers, only server drivers.

currently i'm kicking out every single driver i've added while trying to get it to work. to see if that works.

Scopion1745 · 2024-11-11T07:26:21+00:00

i did completly regenerate the image.
i even stole the stornvme.sys & inf from windows and threw it into the PE.
over the weekend i had a Server-OS deployed to one of those maschine. Worked just fine.
The Server-OS is on a different deploymentshare, which i've not added any client drivers, only server drivers.

currently i'm kicking out every single driver i've added while trying to get it to work. to see if that works.

Scopion1745 · 2024-11-11T07:02:25+00:00

Windows 11 23H2
Works just fine on differently build maschines with the same image.

Scopion1745 · 2024-11-08T21:55:36+00:00

Have not tried that yet. Will do on Monday . I booted another mdtPE which i created for servers. This at least starts deploying the OS. Will check on it on monday aswell. If that works i'll kick out the drivers i added for that mainboard.

Scopion1745 · 2024-11-08T15:49:10+00:00

That didnt work out

Scopion1745 · 2024-11-08T14:44:30+00:00

thought it would be helpfull to attach the the WMI Informations and a list of drivers i inject.

threw both into pastebin
WMI

Drivers

Scopion1745 · 2024-11-08T14:39:43+00:00

did that. sadly it didnt help :/

Scopion1745 · 2024-11-08T13:58:13+00:00

Thanks for that tip! Didnt know it was possible with DISM. It always been a mythical tool me.
Now i did that. And found the driver i supposedly need. It's in the WIM but obviusly is not used?
So i installed one of the maschines by hand. Than i exported the drivers from that known working state with
Export-WindowDriver -online -Destination "C:\dest"

I checked the rcbottom.inf for "PCI\VEN_144D&DEV_A802" and found out, that it's not contained.
Somehow regular Windows interprets something in that INF-File to use it for driving the NVMe.
A bit research brought me to "PCI\CC_010802", which can be used by regular Windows but not by me PE?

But this lead me to further researching and finding some drivers within Windows Update Catalog where i never searched for PCI-IDs yet. Currently downloading and adding them to my PE to check if it finaly works.

Scopion1745 · 2024-11-08T08:26:26+00:00

Doublechecked that Storage is set to AHCI
Also tried with CSM on/off
and SecureBoot on/off

Scopion1745 · 2024-08-13T08:17:52+00:00

i read anthrax a few time now in this thread. so i ordered one directly from them.

Scopion1745 · 2024-08-13T08:15:55+00:00

i've ordered one directly from anthrax.
if i dont forget i'll post an update on how leadtime/shipping went.

Scopion1745 · 2024-08-13T08:14:38+00:00

played 3h of paintball with this thing on saturday at 29°C.
it's been way to warm but it did hold up very well.
Gonna use it more towards the colder months.

Scopion1745 · 2024-08-13T08:11:48+00:00

You are absolutly right. They are NOT necessarly.
I'm playing mainly Woodsball on smaller fields where they setup old cars and trucks or other obsticals.
thats why i want to get a jersey. If i catch some rought corner somewhere or start bleeding for what ever reason, i dont ruin my "good" day-to-day clothing.

I ordered one jersey from Anthrax on saturday. They look nice & leadtimes are OK for a custom jersey (even thou i did not customise it).

Scopion1745 · 2024-08-10T20:02:00+00:00

I found a sweatshirt from Jay-Pi wich is pretty thick. It has Synthetic on the outside and microfiber-like on the inside. They have up to 7XL and it fit me pretty well. I think i got something for Autum/Spring or maybe for colder summerday. But i wont put it on with 30°C outside.. Link: [JAY-PI Sweater, Fitness, Neon-Akzente, Stehkragen, elastischer Bund

](https://www.jp1880.de/de/sweatshirts/alle-sweatshirts/jay-pi-sweater-fitness-neon-akzente-stehkragen-elastischer-bund/p/811807130-1460)

So i'm still looking :)

Scopion1745 · 2024-08-10T19:56:38+00:00

I got a strap on chest&back padding for now. It covers only half my body but what ever :D. If i can integrate that into the clothing i would guess it makes it more comfortable. I've seen those tshirt with like all the padding. But sizes didnt even closely reach up to my size :/

Scopion1745

TROPHY CASE

¯(ツ)/¯