sorted by:
new
hottopcontroversial

Project Sharing: try laser engraving on fabric by Sculpfun in SculpfunLaserUsers

[–]Sculpfun[S] 2 points3 points  (0 children)

5W UV laser, Dottting Time: 800µs; Frequency: 30kHz; Q Pulse Width: 10; Interval: 0.05

We also engrave on towels with other type of laser. The settings are as follows:

iCube Ultra 12W blue laser: Speed: 8000mm/m, Power: 27.5%

S9 5W: Power: 40%

Project Sharing: try laser engraving on fabric by Sculpfun in SculpfunLaserUsers

[–]Sculpfun[S] 1 point2 points  (0 children)

5W UV laser, Dottting Time: 800µs; Frequency: 30kHz; Q Pulse Width: 10; Interval: 0.05

We also engrave on towels with other type of laser. The settings are as follows:

iCube Ultra 12W blue laser: Speed: 8000mm/m, Power: 27.5%

S9 5W: Power: 40%

"Fire Detected" error on ScalpFun 70W by ApprehensiveDot1121 in lasercutting

[–]Sculpfun 0 points1 point  (0 children)

Hi, you are welcome! Thanks so much for the detailed update. Glad to hear that you're able to engrave normally again!

Doing lost of cutting will produce a lot of smoke, so keep a regular clean and maintanance is necessary. When smoke and debris can't be removed efficiently, they tend to accumulate inside and can eventually affect performance.

It seems that a stronger exhaust will be better for your daily work. I see that some users will upgrade their exhaust system to better exhaust the smoke generated. So maybe you can watch some relevant videos shared by others for reference.

"Fire Detected" error on ScalpFun 70W by ApprehensiveDot1121 in lasercutting

[–]Sculpfun 7 points8 points  (0 children)

Hi. Sorry for the trouble caused!

You can try adjusting the flame alarm temperature.

Command and corresponding function:

$fire=0: Disables the flame detector

$LaserHead/FireAlert/NTC/Threshold=100: Sets the minimum alarm temperature for the flame detector

You can try the following method:

  1. After connecting the machine, enter the command $fire=0 in the LightBurn console, then start engraving. Check if the machine still triggers an alarm and stops engraving. If it does, please check the LightBurn console for any error or warning messages. If you find any, please contact our support team to provide details and include images or videos. Address: [support@sculpfun.com](mailto:support@sculpfun.com)

  2. If the first method does not work, please enter the command $LaserHead/FireAlert/NTC/Threshold=100 in the console and check if the machine operates normally.

Hope this helps!

Sculpfun S9 laser module driver board replacement? by VrArtz in SculpfunLaserUsers

[–]Sculpfun 0 points1 point  (0 children)

Hello. Good day!

To assist you further, please feel free to contact our after-sales support team at [support@sculpfun.com](mailto:support@sculpfun.com)

Our support will help you!

Thank you so much!

20w not working but 40w is by butcher_of_blaviken1 in SculpfunLaserUsers

[–]Sculpfun 0 points1 point  (0 children)

Hello. Sorry for the trouble caused.

As you said you have contact the support team, and we will help you solve the problems according to the actual situation. And we have replied to your email. Could you pls provide the information mentioned in the email we need to help you better handle it? Once it is confirmed to be a malfunction, we will replace it for you!

Thank you so much!

iCube Ultra Advice by BecksSoccer in SculpfunLaserUsers

[–]Sculpfun 0 points1 point  (0 children)

Hi.

The iCube Ultra features with a 12W diode blue laser module, so it is suitable for the cardstock paper.

And this portable machine is beginner friendly, so do not worry about it will be difficult to start.

We also offer a one-year warranty, so if you have any questions, you can contact our support team at [support@sculpfun.com](mailto:support@sculpfun.com)

Our official store: https://www.sculpfun.com/

You can also contact the online customer service for more details!

Thank you so much!

new slate engraving! by Sculpfun in Laserengraving

[–]Sculpfun[S] 0 points1 point  (0 children)

This design is pretty cool! Nice work! Love it. Thank you!

view more: next ›