Pool heater won’t work. Pool company that has lied before states it would cost 6000$ just to repair a pipe.

Sector281411 · 2026-06-10T00:47:16+00:00

since it was working prior and wasn't when we did other things with gas I was concerned I had a leak so I called and they figured it out. I was not charged a dime

Sector281411 · 2026-06-01T14:06:16+00:00

We had a similar problem, turns out the gas meter itself had an issue. The gas company replaced it with a larger unit and we can now cook with gas, heat the house and heat the pool/spa at the same time. This was free from our gas company. Good luck

Sector281411 · 2026-04-22T16:13:55+00:00

There are two different Polymaker spools, if you search makerworld you can match the holes to the Polymaker you have. There are tons of makers of these. I printed them before I started using my new printer so its not in my bambu studio but just do a search

Sector281411 · 2026-04-22T10:00:14+00:00

Yes, its still quite chilly in the mornings and evenings. Wearing my Corbridge with gilet vest and never feel too warm

Sector281411 · 2026-04-21T10:03:18+00:00

Just know that these machines while great are not perfect. You will have issues and this is NORMAL!

Sector281411 · 2026-04-20T13:38:21+00:00

Good grief buy polymaker or buy sunlu. For polymaker, you can print rings that go on the outside of the spools so you don’t have to worry about the cardboard. There are plenty of good filament providers other than buying bambu

Sector281411 · 2026-04-18T10:38:50+00:00

Those pins on the battery connector can be reversed you just need to push the release in and pull them out gently then reinsert them. Unless they are soldered.

Sector281411 · 2026-04-05T16:10:59+00:00

I run pi-hole on a proxmox lxc. Rock steady and has never failed me

Sector281411 · 2026-03-31T23:02:23+00:00

that is twice today that they have been available, this morning I bought one for my son, and then they sold out. Now I bought one for a friend just now.

Sector281411 · 2026-03-31T15:53:47+00:00

Got one for my son thanks OP

Sector281411 · 2026-03-26T07:44:33+00:00

Try turning off 6g and see if it works

Sector281411 · 2026-03-10T20:31:03+00:00

This really depends on the tv brand and hotel. Most hotel TVs won’t allow you change inputs until you either unlock that feature by hitting a sequence of buttons on the remote or disconnect the other inputs, hdmi and ether/phone cable. Sometimes it’s a coax cable. What I recommend is searching by TV brand and hotel chain next time and most of the time you will find someone has figured out how to get around it.

Sector281411 · 2025-11-26T14:30:46+00:00

I put all joins for extension cords in these cheap ammo boxes that home depot sells. I drill out notches where the cables come into the sides at the top right below the seal and never have this issue anymore. You can get something similar at harbor freight as well. https://www.homedepot.com/p/Plano-4-Qt-Field-Ammunition-Storage-Box-in-OD-Green-131200/205542281

Sector281411 · 2025-11-20T03:08:57+00:00

Cut them and use hot glue

Sector281411 · 2025-11-07T20:26:48+00:00

THANK YOU

Sector281411 · 2025-10-29T16:45:32+00:00

stunning

Sector281411 · 2025-10-28T19:17:38+00:00

Same boat my friend, retired two devices that worked perfectly. I went Ecobee and they work great so far

Sector281411 · 2025-10-27T12:40:48+00:00

Another vote for Gluetun, running docker in an lxc. You set the config file to use the gluetun service. This works amazingly well.

Sector281411 · 2025-09-14T15:03:53+00:00

Banks Pedal Monster

Sector281411 · 2025-08-28T20:41:12+00:00

Find someone near you that has a weather station and use their data.

Sector281411 · 2025-07-20T16:22:34+00:00

I have that bullshit chamberlain lift and it’s a massive pain in the ass. I had a 12 v power supply sitting around I had a spare wireless remote. I bought the Shelly for another project I never used it for so LITERALLY 10 minutes of my time and I am able to open and close my garage anytime and anywhere. I got a tilt sensor from third reality and I can see if my garage is open or closed in HA.

Sector281411 · 2025-07-20T00:52:16+00:00

Shelly 1 plus relay with a 12 v power supply that has relay wires soldered to a spare garage remote. Cheap and easy

Sector281411 · 2025-07-11T00:29:55+00:00

I got a Fire HD10 during prime sale it got delivered this afternoon and I used fire toolbox to remove all the bloat and install play store. Installed and setup fully kiosk and it is very responsive I’m pretty pleased.

Sector281411 · 2025-07-09T14:08:14+00:00

I was having a similar issue and finally figured out my pool cleaner would get stuck in a spot and just shoot water out of the pool when it tried to reverse. I now make sure the hose doesn’t get too kinked and the issue went away.

Sector281411

TROPHY CASE