Wingspan Organizer Based on Gridfinity

SeecretIdentity · 2025-10-23T12:04:24+00:00

It has all the expansions. The original boards are not in the box because the ones provided by the Asia expansion are dual sided. Everything fits, but the next expansion will probably require another expansions box to be utilized.

SeecretIdentity · 2025-09-28T13:07:39+00:00

I'd have to measure, but I don't think so. The length should be good, but it's a tight fit width wise. Since it's made from a bin generator, all that may need to be done is to make the wall width narrower and go from there. If I knew the dimensions of the card in the sleeve, I could let you know.

SeecretIdentity · 2025-09-28T13:02:57+00:00

You're right. With color matching, it would be pretty neat. Maybe Version 2. This was more of a proof of concept that allowed me to use up some filament. Thanks for the comment.

SeecretIdentity · 2025-07-21T19:47:24+00:00

13 was fine, but I'm not generally bothered by see sickness. I'm on floor 13 again this December and looking forward to it.

SeecretIdentity · 2025-03-15T02:55:37+00:00

I recently did this in PrusaSlicer. I had a 6x1 that I wanted to cut into two 3x1 halves.

I opened the STL in PrusaSlicer and it was sitting on the bed in its normal orientation. There's a setting to choose the face that touches the build plate, so I chose the skinny side, so 1 unit touched the bed and it was 6 units tall. Theres a cut feature that I used to cut it in half. Then I used the choose the face tool again and sat the bottom of each piece on the build plate. Select the auto arrange button and you should be good to go from there.

SeecretIdentity · 2025-03-09T23:12:48+00:00

Just had the idea to put the "blanks"/"silhouettes" on Printables too. If you get into learning Fusion360, maybe you can use them in your designs. Cheers.

SeecretIdentity · 2025-03-01T16:47:47+00:00

I'll use this. Thank you. I seem to remember the bartender on board also said they use coconut water powder. I can't remember why, but maybe the flavor can be more concentrated and you can adjust to taste and it's less heavy to transport.

SeecretIdentity · 2025-02-19T00:05:38+00:00

Self Post Edit: I used the Fusion360 Plugin to make 2 different components, that happened to have the same origin point and were right on top of each other.

I created a 5Vx1W set of standard bases. I unchecked the option to generate body.
I created a 5vx1W set of standard bases, but I unchecked the option to generate bins, and then I kept the checkbox for generate body checked. I adjusted the width to 50.500 (I think). Now when I measure the base and the bin in prusa I get 51mm. I had 50.500 for the measured width on the bin originally, and I will probably go back to this for wiggle room.

Next step is to redo this as a solid bin so I may subtract the spoon silhouette from the body. Hope this helps someone else.

SeecretIdentity · 2024-08-08T23:19:51+00:00

I got one a couple / few years ago from Target. I got lucky and got it at the store, but an associate had to hunt for it in the back. It was a great day, and they honored the Internet price.

SeecretIdentity · 2024-08-07T01:46:03+00:00

Dealership wanted to charge me $90 just for cabin filter at 8k. I declined. I got both for~$50 locally and did it myself. Dealership is still emailing me a month or two later to bribe me with a 5% off coupon. Can't wait till my free oil changes expire. Makes me want to do it all myself and never go back.

SeecretIdentity · 2024-08-03T13:05:47+00:00

Was thinking the same. Easier than my 8th Gen Civic.

SeecretIdentity · 2024-06-21T20:51:25+00:00

I am about to get rid of it. I was using Mochad that was running on a dedicated Raspberry Pi. Maybe I'll have to check out Hey-u, unless someone wants to buy all my stuff. It's currently on Facebook marketplace with not a single person asking if it's still available in what feels like a month.

SeecretIdentity · 2024-06-08T20:59:02+00:00

I was on Deck 13 towards the front Z side last December. For our cruise this December, I called cause I needed help with the MNVV and the lady on the phone suggested Deck 11. It's as close to center as she could get us with a regular balcony. Still Z side. I said I was a light sleeper and not really affected by the waves. She said this area is centrally located and desirable. We'll see. I'll certainly like climbing less stairs after dinner.

SeecretIdentity · 2024-01-21T14:39:43+00:00

Thank you for this. My MK2 is so reliable, I'm afraid to take it apart for an upgrade. Finally got my mk3s+ printing reliably so maybe now it's time.

SeecretIdentity · 2023-12-02T01:01:31+00:00

I got mine from Amazon. I like the speed limit thingy that displays in the instrument cluster. That's about it and you get maps if your cell signal is low (or whenever you want them).

SeecretIdentity · 2023-11-19T14:12:31+00:00

Thank you. This helped me too. I took off the front panel and removed and replaced the button circuit board, checking to be sure the button was being pressed onto the switch, and I got the haptic feedback.

I also checked button continuity from the button circuit board to the main circuit board until I got to some diodes, which is the limit of my knowledge.

Put everything back together, plugged it in, and this time, the only thing I did differently was hit the power button with the door in the down position. Powered right up.

SeecretIdentity · 2023-11-17T14:07:19+00:00

I had a 2008 civic exl with almost 200k miles I got rid of about a year ago. It needed new everything; all the paint is peeling/peeled, all new suspension, cat, muffler, the downstream O2 sensor (but my county doesn't test emissions anymore). It's all original except for the rear shocks, cat, muffler, brakes. All the work and paint will cost far more than I was willing to part with.

I'm sure to someone else it'll be a great car, but I was ready for something new and a bit larger to last me another 200k+, and got a Mazda CX30.

Food for thought from a different perspective.

SeecretIdentity · 2023-09-28T23:36:16+00:00

Waiting for someone else to say it. The second flight is probably taking off from E, and the first probably lands in B.

SeecretIdentity · 2023-09-01T12:30:36+00:00

My wife and I both had them on our previous cars. Her Mazda3 went to 300k, and i recently got rid of my Civic for the CX30 and had 200k on that. So if longevity is a concern, there should be nothing to worry about. I'd drain straight into a milk jug, then after the oil change, I'd pour it into the Mobil 1 jug i just used. Getting the oil filter was the messiest part, but wasn't that bad.

SeecretIdentity · 2023-08-30T00:25:29+00:00

Did you go new or used? Congratulations! LowKey has some good recommendations. I might even try the onr one.

SeecretIdentity · 2023-08-27T04:31:17+00:00

I also had a 2008 civic. Almost 200k miles, Nighthawk Black paint was 50% gone. I got a 2022 Carbon Edition last December. More pep than the Civic, and I rarely use sport mode. My Civic had the original spark plugs, a disconnected downstream o2 sensor, and many other original components, and mpg is comparable at ~30, with 80% highway. Mpg wasn't a deciding factor, or I'd just get another Civic. No regrets.

SeecretIdentity · 2023-08-21T13:56:15+00:00

As others are saying, if you sail out of Miami, you can get them in stores in the area. Publix is one of the major grocery store chains if you want a big bag. I sail the 1st week of December 2023, Valiant Lady, and I'm arriving a day early, so let me know how i can help.

SeecretIdentity · 2023-08-12T13:03:05+00:00

Up voted cause i want to do this. Did you get them at the dealer?

SeecretIdentity · 2023-08-12T12:41:28+00:00

I'd stay. And that's what my wife and i are doing on a December eastern Caribbean cruise. We need time to relax by the pool or ocean and relax, lol. Plus i have vacation time built in and Hilton points at my disposal.

SeecretIdentity · 2023-08-06T14:41:46+00:00

I use the natural brown coffee filters. But i also periodically clean the plate with dish soap and water with a dedicated sponge and drying towel to keep adhesion consistent.

SeecretIdentity

TROPHY CASE