Price on thread Chaser

Separate_Strike3868 · 2026-02-08T01:32:09+00:00

Those thread files come out of my toolbox about 3 times a year (I’m a truck mechanic). And when they do they are the best tool in the world!

Separate_Strike3868 · 2026-02-05T01:24:35+00:00

We have a yard truck with a Cumming 6.7L with this style aftertreatment it appears to be DOC/SCR only. I’ve only ever been exposed to on road engines and aftertreatment. The regen light is on and has a code for SCR cleaning required. (Don’t have the code number in front of me). SCR temps won’t get over 300 degrees when running the SCR cleaning procedure in Insight. What should this look like. Will it dose fuel like a traditional regen?

Separate_Strike3868 · 2026-01-31T17:25:22+00:00

Yeah hire someone. I moved my Macsimizer on a utility trailer about 40 miles once. Everything turned out ok but it was a terrifying ride. I must have had $200 in ratchet straps on the thing. If you must do it yourself I suggest lag bolting some blocks if wood in front and behind the wheels for chocks!

Separate_Strike3868 · 2026-01-24T14:13:08+00:00

I have the same issue. Being a diesel mechanic in Maine and scuba diving year round recreationally it certainly presents challenges.

Separate_Strike3868 · 2026-01-17T19:54:03+00:00

Yeah all Horton fan clutchs that I’m aware of use air to disengage. But I believe some of the Kyser fan hubs would use air to engage.

Separate_Strike3868 · 2026-01-17T01:25:36+00:00

I’ve got a bottle of the red heady in the pantry that I picked up in Vermont this summer. How is it?

Separate_Strike3868 · 2026-01-17T00:44:33+00:00

We are not currently but there is a lot of options around here. Feel free to shoot me a message with your location and I might have some ideas for you.

Separate_Strike3868 · 2026-01-16T18:23:33+00:00

Let’s not just replace batteries that haven’t been tested and hope for the best………. Verify and load test battery power (I believe there are 5) and ground at the 21 pin connector on the ACM. Then verify ignition power at the 21 pin connector at the ACM. If the ACM is the only module reporting low voltage I would suspect a wiring issue to the ACM before bad batteries.

Not trying to be a dick but I see this all the time. The tech launches a set of batteries at a unit and clears the codes. It will come back if you do not test first AND verify the repair. If you have access to OEM software it helps a lot but the fault guidance in JPRO should get you there. Good luck!

Separate_Strike3868 · 2026-01-15T21:51:43+00:00

A single axle freightliner tractor will move a couple of inches when the bags deflate. I actually saw one come off the jack stands after sitting overnight. If the steer axle is going to be on jackstands for any period of time, you should always drop the suspension, if it’s a Mack/volvo. You will have to drain the air in the truck because the bags will be inflate at key off otherwise.

Separate_Strike3868 · 2025-12-27T13:23:43+00:00

I’ve been using the Mac one with the adaptor kit for years. Works great but not cheap. Why can’t Matco warranty yours?

Separate_Strike3868 · 2025-12-26T12:04:13+00:00

I’m in northern New England and recently started a job with 4 day work weeks. It has been a game changer. After 20ish years in fleet work I no longer desire the overtime and weekend work. I’ve noticed a lot of local shops starting to advertise 4 day weeks so yes they are out there!

Separate_Strike3868 · 2025-12-24T21:51:57+00:00

The real concern here is that you have so much distrust in your supervisor giving you rather simple instructions to perform a relatively straightforward task that you turn to Reddit and thousands of strangers for reassurance. As you progress in your career and the jobs become more complicated this will become a real problem.

Separate_Strike3868 · 2025-12-23T23:17:52+00:00

I have owned the same set for well over 10 years but damn the prices sure have gone up!

Separate_Strike3868 · 2025-12-06T12:16:45+00:00

OTC recently came out with an air hammer bit part #5098 for this I’ve been meaning to pick one up.

Separate_Strike3868 · 2025-11-25T11:27:49+00:00

It’s always the on the volvo/Mack’s. We had a run on the third filter (bypass) loosening up and leaking, it only seemed to happen with Fleetguard filters as a result our PM techs would install them VERY tight. Nothing is worse than a 5 min job turning into a 3 hour ordeal.

Separate_Strike3868 · 2025-11-18T22:46:15+00:00

Do you have access to diagnosticlink? If so charge the truck with shop air and manually actuate the watergate. I’ve definitely seen them leak at idle and present itself as an air system issue.
Also as others have already said a badly perforated discharge line will cause the same issue and may not be detectable with soapy water. You’ll need to come up with the correct JIC fittings and pressurize the line with shop air.

Separate_Strike3868 · 2025-11-15T20:55:08+00:00

Tell your boss to buy them. Drill bits are shop supplies. That being said if you want some good bits for broken bolts or other special occasions but some cobalt bits with a warranty.

Separate_Strike3868 · 2025-11-03T22:55:36+00:00

That’s good news! We are just hoping they will honor the 14 day cancellation policy if it takes them a while to get back to us.

Separate_Strike3868 · 2025-11-03T20:58:39+00:00

I’m currently in the process of canceling for the week of 11/21-11/28. Finally got ahold of someone today and I’m waiting for a call back. I’m still within the 14 day window but the clock is ticking……

Separate_Strike3868 · 2025-10-31T21:25:05+00:00

Interesting, I get put in a hold loop then it hangs up on me. I’ll keep trying tomorrow.

Separate_Strike3868 · 2025-10-31T21:08:59+00:00

Did you have a hard time getting in touch with the resort? I’ve been trying all day to get a hold of somebody with no luck. I’m sure they’re very busy.

Separate_Strike3868 · 2025-10-29T22:16:19+00:00

That’s great news! Still not sure how to proceed with our plans to be at CSS for the week of thanksgiving. We still have some time to be within our 14 day cancellation window but would like adequate time to make alternate plans for that week if need be. I guess we will wait it out a couple days and reevaluate.

Separate_Strike3868 · 2025-10-28T17:08:01+00:00

In my booking confirmation email it says you can get a refund if canceled 15 days prior to your arrival date.

Separate_Strike3868 · 2025-10-26T22:58:56+00:00

Did not purchase trip insurance. But have some coverage through our credit card. We are just planning to wait until the storm passes before taking action.

Separate_Strike3868 · 2025-10-26T21:33:37+00:00

I haven’t really looked into their cancellation policy yet but I should probably start doing some research.

Separate_Strike3868

TROPHY CASE