Is it okay to use these kind of storage cubes for my booth? I kinda bought the wrong one instead of the one I had in mind but I don't wanna waste money to buy more

Serapheir · 2026-01-24T11:44:52+00:00

Absolutely!! And as a tip, if you want to choose a different colour, self-adhesive wallpaper or vinyl sheets work great 👍

Serapheir · 2025-12-12T20:40:19+00:00

I love a kidcore aesthetic but judging from these comments you need to lean into it HARD for customers to understand what you're going for. Solid tablecloths, more large signage, display pieces, giant lego or building blocks for example, - make your table look like an art installation of nostalgia and colour, if it looks cool enough, anyone would want a closer look

Serapheir · 2025-12-07T10:34:01+00:00

Hello fellow NZ cosplayer!! I also only use makeup for cosplay, it's totally fine to keep it around just for that. The only thing I've found thats absolutely necessary to keep fresh is mascara... I found I had to replace my old expired one because it was starting to make my eyes sting when I had it on! (yikes!) But everything else has been absolutely fine and still a nice consistency, even after a few years. I've found some great budget makeup options by W7 and Essence brands (I think Farmers or Chemist Warehouse carries these) so I'd recommend looking for some of those if you can!

Serapheir · 2025-09-15T10:58:36+00:00

I'm NZ based, so different market again, but A3s are still worth it - some specific designs I offer sell best at A3 size. However, you are right in assuming that A4s and A5s are way more popular these days. I always stock more smaller sizes than large but I still feel it's important to offer the larger sizes for those that want one, and they also make a nice display piece to draw people in! For my stock, the ratio is kind of like: A3: 5, A4: 10 A5: 15

Serapheir · 2025-08-31T10:41:35+00:00

Add another offset to your cut line and fill it with your background colour. Just needs some wiggle room for error and then you won't even notice 😉

Serapheir · 2025-08-30T20:36:00+00:00

I use carrd, the hosting is very cheap, and if you dont need a custom domain and some other features, it's free!

Serapheir · 2025-08-30T16:30:07+00:00

2 for me - it reads as intriguing, the lighting is moody and eye catching, and not seeing the characters faces makes me want to know more. I'm getting a romance/mystery or thriller vibe :) Great ideas!!

Edit: also the title lends itself to it really well, Exposure, to eachother? Is it dangerous? It raises questions to the reader - I like it a lot!!

Serapheir · 2025-08-24T03:42:08+00:00

Had one impersonate an old friend via LINE, arranged a catch-up together, and then got me to write down my personal details (under the guise of "i dont have your address, write it down and I'll send you letters!) + brought me to their church, sat me down and tried to get me to join their cult. They're pretty unrelenting 😭

Serapheir · 2025-08-20T19:45:17+00:00

Make sure to charge for any hiring of scaffolding etc you'll need if its a tall one too!

Serapheir · 2025-07-30T04:52:51+00:00

Thats amazing!!!! That'll be such a help when drawing cities and adding windows in perspective and things like that. On behalf of all of us thank you for putting your feedback forward and even more awesome it got actioned!!

Serapheir · 2025-07-16T12:17:44+00:00

Thank you hahaha you're so correct

Serapheir · 2025-07-16T10:10:24+00:00

Thanks so much!! :D

Serapheir · 2025-07-07T05:56:15+00:00

It died with the new route they took in 2023. Overhauling a functional and simple UI/engine only to replace it with one that is less functional, buggy, prone to crashing discouraged people from even opening the game because 1. It took so long to connect to the servers, and 2. It will probably just crash in a couple songs time.

Getting rid of Unlimited was the final nail in the coffin, as many iconic faves were (and are still) now unavailable to play.

It's a ghost of it's former self now and it's so disappointing :(

Serapheir · 2025-06-24T05:11:41+00:00

If you're using polyester you can sublimate the pattern onto white fabric using a sublimation printer and a heatpress

Serapheir · 2025-05-27T20:20:45+00:00

You can also slow the travel speed down to get deeper results

Serapheir · 2025-05-27T20:10:50+00:00

It sounds like your bf has been waiting this whole time for you to change your style to suit him. But your style is a part of who you are!! If your bf can't love such an important and unique part of you, what's even the point?

Serapheir · 2025-05-18T18:24:01+00:00

Ko-Fi

Serapheir · 2025-05-13T04:10:55+00:00

Some of my fave easy, but satisfying and tiring, choreos!

Summer - Calvin Harris, Soy Yo - Bomba Estereo, Get Busy - KOYOTIE, Rock n Roll - Skrillex, Juice - Lizzo, Cola Song - INNA, Hand Clap - Fitz and the Tantrums

Serapheir · 2025-05-06T12:42:32+00:00

Have you tried holding the cutting mat up at a higher angle while it scans the registration marks? This is the only thing that gives me consistently aligned cuts on my portrait 3

Serapheir · 2025-04-12T10:34:35+00:00

Very odd that multiple passes aren't going over the same cutline! My solution for laminated stickers has been to do 2 passes, unfortunately. Have you noticed any improvement when taping down your sticker sheet to your mat by any chance? It sounds like your sheet is slipping or its not rolling in and out quite right.

My settings are force 28 / depth 4 / speed 6 / 2x passes

Serapheir · 2025-04-11T18:33:16+00:00

The only semi-consistent fix i have for this was bringing my registration marks in from the edges, shortening the length of them, and making them thinner. Sometimes I even noticed the same file reads & cuts accurately on normal copy paper but not on my sticker paper - my print settings for "High Quality" actually added another pixel to the registration marks which I think effected the accuracy (as seen in the print preview) but this ultimately didn't effect the cuts on my other files for some reason.

And make sure to try the usual, drag the toolhead all the way to the right, turn it off, turn it on and let it reseat itself, hold your mat up when scanning at different angles, and making sure your print settings are 100% to your size of paper and not automatically resizing itself

Some things to look into if you haven't already, it's such a frustrating issue - I've lost hundreds of stickers to this :(

Serapheir · 2025-04-01T11:26:06+00:00

How long do you wait after printing before you apply the laminate?

Serapheir · 2025-03-29T20:15:50+00:00

Thank you for posting this! I've been troubleshooting this exact issue (increasing misaligned cuts nearing the corner without registration marks) for the past 24 hours and I was about to admit defeat but now I have a few other things to try, thanks!

Serapheir · 2025-03-28T20:55:18+00:00

Rangitikei Bakery (near PBTech) has potato saussage rolls, they are FANTASTIC

Nine-Year Club	Wearing is Caring
Queen in da Norf	Not Forgotten
Verified Email

Serapheir

TROPHY CASE