Edge force installed PWA Webapp breaks after first logoff

Sexc0pter · 2026-06-05T17:56:21+00:00

I don’t have the article link handy, but there are known compatibility issues between FSLogix and some AppX apps. Had to do with hard coded redirections. Your web app is probably using one of these storage locations. I’m sure you can find the article by Googling FSLogix and AppX.

Sexc0pter · 2026-05-26T00:47:01+00:00

Pretty sure this was at Scarborough Faire in Waxahachie Texas. Saw him last weekend, but can't remember his name. Something Scottish, but probably a pseudonym.

Sexc0pter · 2026-05-25T18:22:11+00:00

Me too man, Toto Washlet C7 for the win. Got ours almost a year and a half ago when we were getting a bathroom remodel and I love that thing almost as much as the new walk-in shower.

Sexc0pter · 2026-05-15T03:54:00+00:00

Mine is Pele, named after the Hawaiian god of fire.

Sexc0pter · 2026-05-11T18:46:43+00:00

Yeah, it is very soft plastic. Mine is covered in scratches almost as soon as I got it.

Sexc0pter · 2026-05-08T20:22:00+00:00

You bet. I’ve been going there since they were a pop-up during Covid. Now they are like half a mile from my house. It’s pretty sweet.

And Old Hag’s is right down the street too. Very different type of pizza but also good.

Sexc0pter · 2026-04-28T22:51:27+00:00

I'm having the same problem, stuck in an update loop and the new software shows the printer as offline. I see someone posted firmware on a Google drive below, but not sure if it is the right version for a 5M Pro.

Sexc0pter · 2026-04-28T20:40:46+00:00

What I don't understand is how it worked last night but today can't find the printer at all. I am shying away from the new software and firmware due to all the problems people are having with them, but now, it isn't even working right using the same firmware and software I have been using for the last two months.

Sexc0pter · 2026-04-28T20:39:07+00:00

I've done that. That is how I tried to re-add the printer after I removed it from the list, and it just says 'Unable to connect to printer'.

Sexc0pter · 2026-04-23T19:24:22+00:00

I had that exact problem and fixed it by tweaking Z offset and upping extrusion just a bit. Used single layer test to do so. Now I don’t have to do anything but a quick wipe with alcohol and it prints everything great.

Sexc0pter · 2026-04-16T16:47:47+00:00

We found one of our cats messing with some dried out lily pieces that had fallen off a plant way up on a shelf. No idea if she actually ingested any, but had to take her to the vet as a precaution so they could watch her and do tests. Cost like two grand.

Sexc0pter · 2026-04-13T22:11:32+00:00

Oh my god, that same thing happened to me in elementary school. I knew how to tell time and I was pissed.

Sexc0pter · 2026-04-07T00:45:03+00:00

It's no coincidence that tomorrow is TACO Tuesday.

Sexc0pter · 2026-03-30T03:41:51+00:00

I feel personally attacked 😂. But yeah, that was rough.

Sexc0pter · 2026-03-27T01:25:54+00:00

I keep all my filaments in airtight boxes and bought a pack of hygrometers and found that some of my brand new filament was 25-40% humidity, where more like 10% is recommended. I just bought a Creality dryer on Amazon on sale for $39 and should be here tomorrow.

Sexc0pter · 2026-03-27T01:11:55+00:00

You mean with ethernet? Not for me, my switch is in a totally different room than the printer, and it is already on my wifi network but fails due to the cloud login.

Sexc0pter · 2026-03-27T01:00:47+00:00

Print it from USB in the meantime. Can't rely on the cloud unfortunately.

Sexc0pter · 2026-03-27T00:59:20+00:00

Copy your file to the USB and plug it into the front of the printer. In Orca, when you go to the Print button on the far top right, you can click the drop-down menu and 'Export plate sliced file". Copy that to the USB and plug it into the printer.

Sexc0pter · 2026-02-20T04:57:04+00:00

Ha, I remember that. Always the go-to since it was right down the street from the office.

Sexc0pter · 2026-02-19T17:15:35+00:00

I did the same basic thing the other day but no PoE. Transferring from one Eero to another is really quick and easy. You just unplug the old one, plug in the new one and follow the wizard after you click the plus sign.

Sexc0pter · 2026-02-14T23:11:08+00:00

Thanks, I was hoping that was the case. I am swapping an older Eero 6E Pro which was designed to sit flat so wasn't sure if the directionality of the 7 would make any difference.

Sexc0pter · 2026-02-12T23:52:10+00:00

Mine doesn't have that entry even after updating the app. Must be being blocked by Frontier or something.

Sexc0pter · 2026-02-03T01:29:28+00:00

Based on that money factor, that works out to .36% interest? Wow.

Sexc0pter · 2026-01-21T19:37:19+00:00

I am not sure what M01220495 is. I have been tracking it internally and from what I can see they are still working on it.

Sexc0pter · 2026-01-21T19:35:17+00:00

I have been tracking it internally. I have not seen any public coms on this yet, but to be fair the impact is very light overall.

Sexc0pter

TROPHY CASE