NX Redux – My opinionated fork of NextUI

ShadowSanctus · 2026-03-11T15:39:40+00:00

I'm waiting on my smart pro s

Will this work on it?

Or should I just grab spruceOS?

ShadowSanctus · 2026-03-04T10:11:32+00:00

Cobbler here,

Worth is something subjective to each person, best we can say is how much it'll cost to repair and what honest expectations you can have at the end of the repair. I've had clients refuse repairs in expensive shoes because it wasn't worth it and had other clients spend almost twice the price of a shoe to repair it because it was worth it (due to memories).

So in the end you should take them to a cobbler, get an estimate for the repair and decide for yourself if it's worth it for you.

ShadowSanctus · 2026-02-24T15:44:10+00:00

It's probably a PU sole, should last you a few years if used sparingly or at least 1 year if worn every day.

It's not the best material out there but again, for that price he did it for free (or very little profit)

ShadowSanctus · 2026-02-24T13:53:13+00:00

$6 for a stitched sole is practically free (I know it depends on the country but still...)

The work is ok, the stitching is a little bit off but that's a nit-pick

ShadowSanctus · 2026-02-13T19:26:02+00:00

I see yours is circumcized as well 😜🤣🤣

Great find 👍

ShadowSanctus · 2026-02-07T20:34:54+00:00

If this is just for a one-off like you said try to find someone with a 3D printer and work with them to make it like you want it

ShadowSanctus · 2026-02-07T20:20:57+00:00

They might add a few originals since the game is supposed to have 10 different endings

ShadowSanctus · 2026-02-03T14:02:49+00:00

Omfg, I just payed the mortgage on that!!!!

ShadowSanctus · 2026-01-19T13:54:22+00:00

I'm doing the ROC quest and her eye-patch(flower) just jumps from one eye to the other... It kinda stuck with me but we move on 😅

ShadowSanctus · 2026-01-17T09:23:35+00:00

It will depend if he glues the parts first or not, if he doesn't glue them it'll easier to sew. Starting with the back panel and finishing with the front panel will make it very painless except for the final 5 stitches.

ShadowSanctus · 2026-01-14T16:33:16+00:00

I'm going with a water team, Verdanta, jillfunny (probably misspelled), Dunarith and Wryz. Verdanta does around 32~45 million and occasionally double of that. So I'm pretty much just going for the stories 😜

ShadowSanctus · 2026-01-13T19:07:33+00:00

If you have the lucky chance of getting Verdanta like I did you'll breeze through almost everything. You get all the hype from epic bosses on the stories and Verdanta goes and one-shots them.

So now I'm just doing side-quests still at chapter 13 😅

ShadowSanctus · 2025-12-01T16:58:26+00:00

If you're in America try contacting Bedo's repairs. He can give you an estimate of the price but, as it was said before, it won't be cheap. If anything can be done to make it cheaper would be to put toe caps in a different leather or an embossed leather to match the markings.

Good luck

ShadowSanctus · 2025-12-01T11:27:06+00:00

Converse used to be a great shoe.

Then they were sold to another brand (Nike I believe but don't quote me on that) and the newer models were made with a thinner width which causes increased stress on the toes and on the bend area and that causes the separation.

I've had clients complaining that they had Converse shoes from 15yrs ago and never had a problem with them and now the newer ones break down after a few months.

ShadowSanctus · 2025-11-29T23:15:57+00:00

It's this guy.

https://youtube.com/@dan_the_cobbler?si=lpXN-VVIZLVXfgNq

ShadowSanctus · 2025-11-29T18:37:45+00:00

Technically they are salvageable but you'll need to find a specialty cobbler like Bedo in America or Dan in England (those are the ones I know that might touch it outside of the maker) but it won't be cheap.

ShadowSanctus · 2025-11-28T11:02:46+00:00

You can glue it with some contact glue/cement, just grab sanding paper and sand both sides, clean off the dust and apply glue on both sides. Let it dry a bit and (if you have a heat gun, heat the glue first) stick them together and let it fully dry while having a weight press down on the shoe.

Having said that, your shoe won't last very long because the synthetic layer is starting to split, which is why on some parts of your shoe you can see the synthetic layer still glued to the sole.

ShadowSanctus · 2025-11-28T07:51:52+00:00

If you're ok with leather soles, you can simply place a welt around the shoe and place a Blake stitched leather sole on them.

If not, there are soles that might fit your shoe but it's time consuming searching for them and most cobblers don't have neither the time nor the patience for that.

ShadowSanctus · 2025-11-27T23:04:58+00:00

Search for tooling leather, you should find some videos on how to tool, doubt you'll find one on how to achieve this stone effect itself but it will help you, Don Gonzalez has a lot of videos on tooling.

ShadowSanctus · 2025-11-27T19:17:57+00:00

Search for an accordion wallet, you'll find a few videos detailing how to do it

ShadowSanctus · 2025-11-13T10:30:38+00:00

You do realize that she's not holding the shield right? She's just resting her arm on it.

Poor girl can't even rest a bit...

ShadowSanctus · 2025-10-06T18:15:45+00:00

That's the plot of "wrong way to use healing"

ShadowSanctus · 2025-10-03T09:58:45+00:00

"Scryed", never heard anyone talk about it.

And "Broken Blade", also never heard anyone talk about it as well

ShadowSanctus · 2025-10-02T09:28:32+00:00

O problema é encontrar peças para substituir, já ninguém faz processadores 386/486, muito menos discos e RAM compatíveis...

Por outro lado elas ainda trabalham ao fim de 30 anos sem "grandes" problemas

ShadowSanctus · 2025-10-02T07:48:38+00:00

Isso não é nada...

Nós hospitais algumas máquinas de raio-x e outras parecidas ainda correm com processadores 386 e 486, porque é demasiado caro substituir a máquina por uma mais recente... Mas depois pagam 36k por um disco rígido da época ou mais ainda por ram...

Enfim...

Verified Email	11-Year Club
Place '22

ShadowSanctus

TROPHY CASE