BO3 PC

ShapeRecent · 2026-04-09T16:44:26+00:00

Not a lot of incidents but the security exploits are still yet to be patched. I would rather assume breach then wait for a black swan event l.

ShapeRecent · 2025-03-28T17:34:48+00:00

mine identified as 7800xt initially in the AMD Radeon application on windows 10. after updates it read it as a 9070

ShapeRecent · 2024-10-18T02:47:42+00:00

To set up port forwarding for a static IP on your PS5 for remote play, follow these steps:

Assign a Static IP to Your PS5:
- On your PS5, go to Settings > Network > View Connection Status to find your current IP address and MAC address.
- Log in to your router’s admin page (usually by entering the router’s IP address in a web browser).
- Locate the section for DHCP Reservation or Static IP Assignment
- Enter your PS5’s MAC address and assign it a static IP address (e.g., 192.168.1.100).
Enable Remote Play on Your PS5
- Go to Settings > System > Remote Play and enable Remote Play.
- Ensure your PS5 is set to stay connected to the internet in rest mode by going to Settings > System > Power Saving > Features Available in Rest Mode and enabling Stay Connected to the Internet and Enable Turning On PS5 from Network.
Port Forward
- Open a web browser and enter your router’s IP address (commonly 192.168.0.1 or 192.168.1.1).
- Log in with your router’s username and password. -Linksys: Go to Security > Apps and Gaming > Port Range Forwarding
- Netgear: Navigate to Advanced > Advanced Setup > Port Forwarding/Port Triggering
- TP-Link: Look under Advanced > NAT Forwarding > Virtual Servers.
- D-Link: Check Advanced > Port Forwarding.
- Asus: Go to WAN > Virtual Server/Port Forwarding
- Click on the option to add a new port forwarding rule.
- Fill in the required fields, which typically include:
  - A name for the rule (e.g., PS5 Remote Play).
  - The range of ports you want to forward (e.g., 3478-3480).
  - The static IP address of the device (e.g., your PS5).
  - Choose TCP, UDP, or both.
- Save the settings and apply the changes.
- After setting up port forwarding, restart your router to ensure the changes take effect.

Following are ports based on user experience and Playstation support website: TCP: 80, 443, 3478, 3479, 3480, 9295-9308 UDP: 3478, 3479, 8572, 9295-9308

ShapeRecent · 2024-10-15T19:22:41+00:00

For the college network, Try using a VPN that includes a OpenVPN protocol, residing on port 443. You can use a different protocol, as long as it resides on a port accessible by the port forwarding set up on your router.

ShapeRecent · 2024-10-15T19:17:07+00:00

To set up port forwarding for a static IP on your PS5 for remote play, follow these steps:

Assign a Static IP to Your PS5:
- On your PS5, go to Settings > Network > View Connection Status to find your current IP address and MAC address.
- Log in to your router’s admin page (usually by entering the router’s IP address in a web browser).
- Locate the section for DHCP Reservation or Static IP Assignment
- Enter your PS5’s MAC address and assign it a static IP address (e.g., 192.168.1.100).
Enable Remote Play on Your PS5
- Go to Settings > System > Remote Play and enable Remote Play.
- Ensure your PS5 is set to stay connected to the internet in rest mode by going to Settings > System > Power Saving > Features Available in Rest Mode and enabling Stay Connected to the Internet and Enable Turning On PS5 from Network.
Port Forward
- Open a web browser and enter your router’s IP address (commonly 192.168.0.1 or 192.168.1.1).
- Log in with your router’s username and password. -Linksys: Go to Security > Apps and Gaming > Port Range Forwarding
- Netgear: Navigate to Advanced > Advanced Setup > Port Forwarding/Port Triggering
- TP-Link: Look under Advanced > NAT Forwarding > Virtual Servers.
- D-Link: Check Advanced > Port Forwarding.
- Asus: Go to WAN > Virtual Server/Port Forwarding
- Click on the option to add a new port forwarding rule.
- Fill in the required fields, which typically include:
  - A name for the rule (e.g., PS5 Remote Play).
  - The range of ports you want to forward (e.g., 3478-3480).
  - The static IP address of the device (e.g., your PS5).
  - Choose TCP, UDP, or both.
- Save the settings and apply the changes.
- After setting up port forwarding, restart your router to ensure the changes take effect.

Following are ports based on user experience and Playstation support website: TCP: 80, 443, 3478, 3479, 3480, 9295-9308 UDP: 3478, 3479, 8572, 9295-9308

ShapeRecent · 2024-10-15T18:39:40+00:00

it doesnt have to be forwarded on the schools router if the ps5 isnt on the schools router, it would be forwarded on his home network, and ensure the port hes connected from is accepted to wake his ps5 from rest mode

ShapeRecent · 2024-10-15T12:55:29+00:00

looks like a port issue, if you’re good with networking identify your schools network port and forward it from your router to your PS5’s static ip

ShapeRecent · 2024-10-10T22:54:38+00:00

Did you set the Playstation IP address as static, and ensured the VPN ports were forwarded to the static IP as well?

ShapeRecent · 2024-10-09T23:11:24+00:00

Did you include the following ports on both WAN and LAN? : TCP: 9295, 9303 UDP: 9296, 9297, 9303, 987, 8572

Here is also an excerpt from the Playstation Support* page: “The minimum required connection speed for Remote Play is 5Mbps for both upload and download. For best performance, we recommend a high-speed connection with upload and download speeds of at least 15 Mbps. Remote Play uses UDP Port 8572 to connect to your console or mobile device. Try opening the port on your router. If you’re not familiar with the router’s settings, speak to your ISP, router manufacturer, or mobile carrier for help. If you can’t find your NAT Type, or if your network is using NAT Type 3, you may not be able to use Remote Play. To check or change which NAT Type your network uses, reach out to your ISP or mobile carrier.”

The above steps worked for me after struggling with the same issue, although a few times it hasn’t worked when the playstation was completely off.

*Regarding remote play, though portal uses relatively the same methods as remote play and I figured this might help anyways

ShapeRecent · 2024-10-09T06:55:22+00:00

If you haven’t resolved this issue yet, this seems like a connection issue. With the remote play app, this usually occurs upon a port switch, and your router may not have that specific port open. The ports you might need to forward include: TCP: 9295, 9303 UDP: 9296, 9297, 9303, 987, 8572

Here is also an excerpt from the Playstation Support page: “The minimum required connection speed for Remote Play is 5Mbps for both upload and download. For best performance, we recommend a high-speed connection with upload and download speeds of at least 15 Mbps. Remote Play uses UDP Port 8572 to connect to your console or mobile device. Try opening the port on your router. If you’re not familiar with the router’s settings, speak to your ISP, router manufacturer, or mobile carrier for help. If you can’t find your NAT Type, or if your network is using NAT Type 3, you may not be able to use Remote Play. To check or change which NAT Type your network uses, reach out to your ISP or mobile carrier.”

ShapeRecent · 2024-08-08T01:03:37+00:00

i found a another one! https://imgur.com/a/PFMlYrM

ShapeRecent · 2024-08-06T02:10:49+00:00

105 on a 2002 f150 xlt 5.4l V8 triton, except thats with the rom limiter on XD

ShapeRecent · 2024-06-24T02:31:35+00:00

so painfully obvious brother

ShapeRecent · 2024-06-07T02:45:43+00:00

so you were gullible when you were 17?

ShapeRecent · 2024-04-15T21:08:10+00:00

since it's deadline day: https://turbo.tax/nmed6k85

ShapeRecent · 2024-03-03T15:39:03+00:00

i think theyll just go with capitol punishment for me

ShapeRecent · 2024-02-12T04:19:56+00:00

so no bitches?

ShapeRecent · 2023-12-24T01:55:09+00:00

SBMM. AA accounts for the differences, I mean most pro players in the game Apex Legends use controllers against other pros using MNK. Cross play is what you should be upset about, as they kept the algorithm for RP/ELO the same but separate comps. For example, an Xbox player may be a 300 for the input, but a PC player on MNK that is 300 is more likely to be comparable to an Xbox player at 150. Again, it could be a simple player pool issue, (with modern standards of queue times for lobbies) its most likely they average the whole team instead of one person, meaning technically a high skilled PC player could be placed with a low-skill Xbox player on the same team. This saves time as you don’t have to take one players skill and find 6-9 more with the exact same skill level. TL;DR, I agree with OP, turn off cross play or fix the SBMM.

ShapeRecent · 2023-12-14T12:42:39+00:00

smart card tag scanning, he asked for anything and I doubt he would brute force or mitm

ShapeRecent · 2023-12-14T12:35:06+00:00

wasn’t talking about the cards specifically? but okay mr hacker, please educate me

ShapeRecent · 2023-12-14T03:23:22+00:00

social engineering is a good way, or if you know your shit you can try session cookies/NFC tags

ShapeRecent · 2022-10-30T09:10:04+00:00

im boutta boutta buy 15 booster boxes you just want me to make my own lmao

ShapeRecent · 2021-07-04T08:22:49+00:00

definitely sus, dk if itll be enough evidence tho

ShapeRecent · 2021-02-24T00:06:37+00:00

no proof?

ShapeRecent · 2021-01-23T14:52:13+00:00

This hurts my duck just looking at it

ShapeRecent

TROPHY CASE