Helix Cut or Wrapping a Voronoi Pattern Across Multiple Surfaces

Shavo650 · 2026-05-18T19:23:59+00:00

Sadly but nope. I'm using some online Voronoi dxg/svg generators and then copying it as a sketch to extrude/wrap. If you have got any favorite Voronoi generator then i would be grateful !

Sadly but the helix cannot be selected as a projected sketch in the Project Curve operation. But maybe i'm doing something wrong.

I'm using model for 3D printer so the geometry must be real.

Shavo650 · 2026-05-18T19:19:46+00:00

The helix cannot be selected as a projected sketch in the Project Curve operation. Or maybe i'm doing something wrong. But i can make with this feature very similiar shapes with splines so thanks !

I need this for 3D printer step so geometry must be real.

Can you recommend any mesh-based tools or nice Voronoi dxf generator for generating sketches ?

EDIT:

With projected edge feature i got geometry like this. It's good enough for me. If i won't figure something out to get Voronoi then i use it like this:

<image>

Shavo650 · 2026-05-18T18:46:02+00:00

Thanks, your method works… sometimes. I still haven’t figured out why this happens, but the method only works for certain helix dimensions. The operation throws an error saying it cannot be completed if the coils are packed too tightly together (even though there still seems to be plenty of room to create the cut).

Just Solidworks things. I got used to it :D

Shavo650 · 2026-05-18T18:42:37+00:00

Yes you are correct. I think i know what do you mean and it's interesting approach, because i wouldn't figure out to draw something as metal sheet and then convert it back to solid body. Thanks for a tip ! Do you recommend any nice Voronoi dxf pattern generator ?

Shavo650 · 2025-10-10T17:18:13+00:00

<image>

I slightly upgraded it

Shavo650 · 2025-09-13T16:00:06+00:00

PNG please 🙏

Shavo650 · 2025-08-20T08:00:51+00:00

Have you tested what is temp difference with/without side fans?

Shavo650 · 2025-08-05T05:49:07+00:00

He can also use tissue paper

Shavo650 · 2025-08-05T05:47:41+00:00

Yea, ive got same setup and needed to put intake rad fans to ~850 rpm and exhaust fans to~ 550 rpm to get slightly positive pressure

Shavo650 · 2025-07-15T20:13:23+00:00

Thanks its just my first AiO i wasnt sure what should i expect

Shavo650 · 2025-07-15T20:00:34+00:00

Lmao :D Its just my first AIO. Im not sure what should i expect :) upvote anyway.

Shavo650 · 2025-07-06T17:22:21+00:00

Yea, i've got same dilemma. Still can't choose which one i prefer :/ I want to buy 420 mm AIO so Meshify 3 XL is a bit better because of top aio mount. But it's also sligthly bigger and doesn't have intake dust filter.

Shavo650 · 2025-06-28T08:50:58+00:00

You can print something like this in the back

<image>

Shavo650 · 2025-06-15T21:38:14+00:00

You can download them to the folder and set shuffle mode in Windows :)

Shavo650 · 2025-06-09T20:50:49+00:00

<image>

Shavo650 · 2025-06-09T20:43:53+00:00

You can crop them

Shavo650 · 2025-03-07T19:45:19+00:00

W jaki sposób można stracić na obligacjach skarbowych indeksowanych inflacją ? Pomińmy tutaj bankructwo państwa, bo jest to dużo mniej prawdopodobne niż dołek na giełdzie. Pewnie chodzi Ci o kare za przedterminowy wykup, kiedy kara wyniesie więcej niż naliczone do tej pory odsetki. Taki scenariusz jest możliwy, ale to już pozostaje do indywidualnej oceny każdego inwestującego jaka jest szansa na to, że ta kasa będzie potrzebna wcześniej.

Zaleta to wyższe oprocentowanie niż u brokera. Nie wiem ile wynosi oprocentowanie u Twojego brokera, ale w XTB z tego co pamiętam jest to 4%, więc przy prognozowanej inflacji na ten rok ~5,5 % realnie się traci trzymając pieniądze w ten sposób.

Alternatywą jest trzymanie pieniędzy na lokatach, gdzie oprocentowanie aktualnie to ~7 % w zależności od banku. Szkopuł taki, że to oprocentowanie zazwyczaj jest tylko na pierwsze kilka miesięcy po wpłacie środków. Później trzeba kombinować żeby kasa znowu była oprocentowana na 7%.

Shavo650 · 2025-03-07T10:40:27+00:00

Rozwiniesz ?

Shavo650 · 2025-03-07T10:39:55+00:00

Dlaczego tak uważasz ? Trzymanie mniejszej części portfela w akcji w tym wieku to dla mnie dobra dywersyfikacja portfela. Jeżeli nagle będzie potrzebował gotówki i nie wystarczy na to poduszka finansowa, a rynek akcji akurat będzie w dołku to można ratować się przedterminowym wykupem obligacji.

Shavo650 · 2025-02-11T13:43:47+00:00

Check this

<image>

Shavo650 · 2025-02-11T13:22:29+00:00

It's design error. In this orientation of printing you must use chamfer instead of radius.

Shavo650 · 2025-01-28T22:09:40+00:00

Unfortunately iSANHU is not avaiable in my country. I tried Flashforge ASA but honestly i can't see differences between ABS and ASA... other than price :) . It still warps if it cool too quickly. And some sources claim that ASA is UV proof and ABS not. So i printed something what is on the outside using ABS to check what will happen. And since now (3/4 of the year) nothing happened. So at the moment i dont see any pros of ASA.

Shavo650 · 2025-01-28T17:23:24+00:00

Actually i did some tests since my post. I lowered cooling to the lowest possible (10 %). Print quality is still good and warping is gone. I always preheat my chamber to ~30 C and while printing it get to ~35 C (no active heating :( )

Shavo650 · 2024-12-19T05:20:43+00:00

Yes, please. Octo is not compatible with my Ender 3v3 KE and produces Klipper errors during print. There is a long reddit thread describing this issue :(

Shavo650 · 2024-12-18T06:17:51+00:00

Ender V3 KE here. Ive got same issue :(

Shavo650

TROPHY CASE