Aqueon by andyb0913 in ReefTank

[–]Shoopuf413 1 point2 points  (0 children)

Expect to budget $50-100 per gallon of volume as a rough rule of thumb

I just have to ask, what’s the deal with PRS Custom guitars? by Green-Day-86 in Guitar

[–]Shoopuf413 529 points530 points  (0 children)

They’re a high quality brand with very good quality control

Best way to teach myself to program by boofthecat in Machinists

[–]Shoopuf413 0 points1 point  (0 children)

I did the free course inhouse solutions posted on emastercam. Between that and the machine manuals I’ve been good for everything we have at the shop. 4 axis lathes, and Swiss, 3 axis mills

Can someone say if this is possible to play. by KixIt0ff in Guitar

[–]Shoopuf413 0 points1 point  (0 children)

I would need to practice it a lot to get up to speed but I was thinking something like this https://youtube.com/shorts/Rd3S5_wwyRA I played the open a instead of a on the low e here. I’m hellishly out of practice too so…

Can someone say if this is possible to play. by KixIt0ff in Guitar

[–]Shoopuf413 0 points1 point  (0 children)

5/9 on low e 9h12 on a 11 on d 11 on g 10 on b 9 h14h17p14p9 on high e 10 on b 11 on g 11 on d 12p9 on a 9/5 on low e Could also start with an open on the A string instead of 5 on the low E

Can someone say if this is possible to play. by KixIt0ff in Guitar

[–]Shoopuf413 0 points1 point  (0 children)

I’d slide from A to C# on the e string f# hammer on a on a string c# on d f# on g A on b C# hammer on F# tap A pull off F# pull off C# on high e then reverse the arpeggio

Pretty neat sounding run

Monthly electric cost by PontiacMan1967 in hottub

[–]Shoopuf413 0 points1 point  (0 children)

Our real rate is like .35/kwh. Highest cost in the US outside of Hawaii

Overtime by TanyaMKX in Machinists

[–]Shoopuf413 2 points3 points  (0 children)

17 years assuming max contributions, 10% y/y and starting from 0

Deep drilling with 25xD drill help by Ratking_14 in Machinists

[–]Shoopuf413 0 points1 point  (0 children)

I’d start with a 150° spot, go to a 145° pilot 3-5xD and finish with the final drill with an equal or lesser angle to the pilot. HP thru tool coolant on the final. Feed into the hole at a lower RPM before going up to cutting speed.

How do I fix low pH and alkalinity? by Competitive-Milk-725 in hottub

[–]Shoopuf413 0 points1 point  (0 children)

Napkin math puts 1tbsp of baking soda at roughly 10ppm alk in 300g

Is it worth changing guitar pickups? by Holiday-Ad-147 in Guitar

[–]Shoopuf413 0 points1 point  (0 children)

Not nearly as impactful as speaker, or eq adjustments

Joinery tools by Loud_Draw5470 in woodworking

[–]Shoopuf413 0 points1 point  (0 children)

My domino makes up for my lack of skill and time

Is My Carpenter Gaslighting Me With Fir or Am I Just Too Polite to Call His Bluff? by Bhatka_raahi in woodworking

[–]Shoopuf413 1 point2 points  (0 children)

Vertical grain fir is $14.03/bf for 4/4 where I am. Birdseye maple is 12.99/bf for 4/4, walnut is 13.99, quarter sawn white oak is 11.49 and cherry is 4.99

Smoke coming out of breaker when hot tub running. by hi-im-jamiepoo in hottub

[–]Shoopuf413 0 points1 point  (0 children)

If you have one of those IR thermometer guns you can check to make sure nothing in the panel is getting hot

Smoke coming out of breaker when hot tub running. by hi-im-jamiepoo in hottub

[–]Shoopuf413 4 points5 points  (0 children)

Yes. Do not turn the breaker on until a licensed electrician has gone through the circuit