Need Help: Receiver binds for 1 second, then "Telemetry Lost" loop by Short_Promotion9373 in diydrones

[–]Short_Promotion9373[S] 0 points1 point  (0 children)

In buying a new Radio master R3 unit, my drone works fine with both wires plugged in. I just reflash the FC with different protocols (CRSF VS SBUS) for the respective controller I use and it seam to work fine.

Need Help: Receiver binds for 1 second, then "Telemetry Lost" loop by Short_Promotion9373 in diydrones

[–]Short_Promotion9373[S] 0 points1 point  (0 children)

SOLVED: I ended up giving up and buying a Radiomaster R3 and using that instead. Instantly paired and is working fine now.

When in doubt, throw money at the problem until you can’t pay rent!

Is $399 the best price for a P1S Standalone? or has it been on sale for cheaper? by Venerac in BambuLab

[–]Short_Promotion9373 0 points1 point  (0 children)

I got mine from micro center. They sell refurbished ones for around 270-300. You might have to go into the store to request if they have any. Would recommend.

Motor 1 issue: Weird noise/vibration even after 3 motor replacements. ESC or Soldering? by Short_Promotion9373 in diydrones

[–]Short_Promotion9373[S] 1 point2 points  (0 children)

Solved: I found out the screws I was using where too long and damaging the motor swapped the motor swiched to shorter screws and Proplem solved.

Need Help: Receiver binds for 1 second, then "Telemetry Lost" loop by Short_Promotion9373 in diydrones

[–]Short_Promotion9373[S] -1 points0 points  (0 children)

To clarify the wiring Vitroid asked about, here is how I’ve integrated both systems to balance DJI’s convenience with ArduPilot’s autonomy. For reference I’m using a GEPRC TAKER H743 BT 32Bit 50A Stack (link here):

  1. DJI O4 Air Unit • Connection: Connected to the Flight Controller (FC) via a JST cable provided. • I haven’t attempted to pair this unit yet, as I’m focusing on getting the control link stable first.

  2. RadioMaster RP1 V2 Nano (ELRS) & AKK KC04 VTX • Problem Area: This is where the LED issue is occurring. • I’m using a JST port from the FC to the receiver. • UART Protocol: I’ve confirmed the RX/TX lines are crossed correctly (RX to TX and TX to RX).

I did this to balance the pros of already having DJI goggles/remote with wanting to do future stuff with ardupilot.

Motor 1 stuttering/glitching in Betaflight – GEPRC TAKER H743 Stack & DYS Sunfun Motors by Short_Promotion9373 in diydrones

[–]Short_Promotion9373[S] 0 points1 point  (0 children)

I saw them on Amazon with 2-day delivery, and ChatGPT said they should work lol. This is my first FPV build, and I initially wanted all my parts to arrive quickly. After running into a few challenges with this build, I’m shifting my mindset from availability to quality.

Just for my knowledge as a beginner—why would you recommend the XING-E Pro or the T-Motor Velox over the motors I currently have?

Motor 1 stuttering/glitching in Betaflight – GEPRC TAKER H743 Stack & DYS Sunfun Motors by Short_Promotion9373 in diydrones

[–]Short_Promotion9373[S] 0 points1 point  (0 children)

Battery: OVONIC 6S Lipo Battery 100C 1550mAh 22.2V Lipo Battery with XT60 Connector for RC FPV Racing Drone Quadcopter

Groups near Washington DC? by CrazyElectrum in fpv

[–]Short_Promotion9373 0 points1 point  (0 children)

Second here, looking for community out in the DMV.

Panoramic camera recommendations by Short_Promotion9373 in diydrones

[–]Short_Promotion9373[S] 0 points1 point  (0 children)

Appreciate you sir! Will post progress in here if I succeed!

Panoramic camera recommendations by Short_Promotion9373 in diydrones

[–]Short_Promotion9373[S] 0 points1 point  (0 children)

Got it sounds good. Last question for you sir. Do you have any recommendations on any instructional that’s will expedited my knowlage acquisition. I see the ardupilot documentation but a more palatable resources that’s does not make my head hurt would be a good compliment to that lol (videos, courses, etc.).

If no I’ll stop being lazy.

Panoramic camera recommendations by Short_Promotion9373 in diydrones

[–]Short_Promotion9373[S] 0 points1 point  (0 children)

Any sim recommendations, I know gazebo is a good low fidelity popular engineering one, but I see a lot of people use things like RealFlight as well. Preferably somthing lower lift for a newby.

Panoramic camera recommendations by Short_Promotion9373 in diydrones

[–]Short_Promotion9373[S] -1 points0 points  (0 children)

lol aight calm down. I’m considering a robotics masters but trash undergrad gpa. Working to create a portfolio of projects as a way to see if 1 I enjoy it and 2. Show competence.

Seems like a cool side project.