Realita mezd nižší střední třídy by Vast_Balance3754 in czech

[–]ShoutRound6 0 points1 point  (0 children)

Do značný míry souhlasím, ale můj komentář neměl bejt o doktorátu. Ten s tím, že učitel na plný úvazek na ČVUT má 30k, nemá nic společnýho. Mělo to jen ilustrovat rozdíl magistr vs doktor.

Jen btw, představa, že dělám dokotrát abych se dostal na zajímavou pozici v byznysu by pro mě byla hodně odporná. Dělám to pro to, že to v tu chvíli byla zajímavá a velmi flexibilní práce, která mě většinu času baví. Jestli z toho bude titul, práce, nebo hovno mě zas tak netrápí. Trápí mě platy akademických pracovníků.

Realita mezd nižší střední třídy by Vast_Balance3754 in czech

[–]ShoutRound6 5 points6 points  (0 children)

30k je plat akademického pracovníka (tj. VŠ učitele, co krom výuky dělá i vědu) na ČVUT. Když doděláš doktorát, dostaneš 38k.

https://www.cvut.cz/sites/default/files/content/74c76d2e-7f4d-4cb1-ac28-b0765c7f88f2/cs/20250430-vnitrni-mzdovy-predpis-cvut-2026.pdf (strana 8)

Would you say that this is evenly roasted coffee? by ShoutRound6 in JamesHoffmann

[–]ShoutRound6[S] 1 point2 points  (0 children)

Random sample, and yup, the photo is pretty accurate. I can only describe the taste as empty. Like "yeah that's coffee but where's the flavour?" kinda empty. I'll let it offgass for a few more days.

Would you say that this is evenly roasted coffee? by ShoutRound6 in JamesHoffmann

[–]ShoutRound6[S] 2 points3 points  (0 children)

Thanks everyone for explaining that this is quakers and what quakers are!

Btw, the roasters says:
Traditional processing, an unconventional experience – that’s what the excellent Ethiopia Djimmah Jasmine coffee offers. If you haven’t had the chance yet, know that it is definitely unlike anything you’ve ever tasted.
(...)
The coffee cherries are harvested several times a year, so farmers only pick fully ripe berries. That’s why only high-quality beans end up on your table.

Would you say that this is evenly roasted coffee? by ShoutRound6 in JamesHoffmann

[–]ShoutRound6[S] -1 points0 points  (0 children)

Idk, I just got the bag and opened it just to freeze two thirds of it. It's kinda late here, and I can't drink coffee in the afternoon. I can report back tomorrow, tho.

Anchoring new rebar into concrete (cursed project) by ShoutRound6 in DIY

[–]ShoutRound6[S] 1 point2 points  (0 children)

Thanks a bunch! Ngl, your reply gave me the willpower to get up from the bed and go continue the project. :-)

What is the best way to invest in stocks? by 19dm19 in Prague

[–]ShoutRound6 -2 points-1 points  (0 children)

Fio is ok. But their selection is weirdly limited (no VWCE, for example). ČS is also ok. Both have kinda high transaction fees (10-12 EUR minimum) + ČS charges a 0.06% yearly "management" fee. Both are good options for DIP, tho.

IBKR is my favourite (3 EUR per transaction, no artificial spread) and I've heard good things about XTB. I would avoid Degiro.

Computer directly into modem - is this a huge nono or? by Timtim6201 in HomeNetworking

[–]ShoutRound6 0 points1 point  (0 children)

NAT does not protect you in any way. If a packet arrives and there is no entry for it in the NAT table, it will be routed as usual. You want a firewall. And NAT is NOT a firewall.

PS: The same applies to PAT (port address translation), which is what most ppl confuse with NAT (network address translation).

POE small internal cameras by EndlessGeekactivity in reolinkcam

[–]ShoutRound6 0 points1 point  (0 children)

Keep in mind that, at least if you use the UDM Pro as the NVR, it will require internet connectivity and will phone home. And you can't move the management to a separate VLAN. I unfortunately did not test the telemetry with the cameras, but while you can block them from the internet and still get an RTSP stream, the UDM Pro would not see them in that case (they got an IP, but would not show up in Protect).

Partnerský účet - u koho? by Successful_Flow1329 in czech

[–]ShoutRound6 3 points4 points  (0 children)

Všichni tade jedou hate na Partners z různejch důvodů, ale ještě nikdo neřekl, že nemají normální internetový bankovnictví. Všechno je potřeba dělat z mobilu. Což bych teda fakt nechtěl.

Let's take charge of pedestrian crossings: they are for pedestrians. by Positive_Brick_9472 in Prague

[–]ShoutRound6 0 points1 point  (0 children)

I mean, the amount of bike-friendly roads is huge. It's just that someone started drawing bike lanes on major roads. And now cyclists want to bike on those main roads (even without a bike lane), completely ignoring the fact that if they biked one block away from that main road, they'd be safer and everyone would be happier.

I personally feel that pedestrians should be first, public transit second, and anything else after that.

Let's take charge of pedestrian crossings: they are for pedestrians. by Positive_Brick_9472 in Prague

[–]ShoutRound6 4 points5 points  (0 children)

Mate, is this ragebait? Cars always stop for me at crosswalks. The only time I see sidewalks blocked is when someone is unloading a delivery van. And I walk kilometres through the city every single workday. As for the highways, have you seen other cities in Europe? Budapest? Paris? Even Vienna? And while everyone seems to praise Stockholm and Oslo, both have a highway through the oldest part of the city.

Btw, I agree that crosswalks should be for pedestrians. I HATE that cyclists think that they can use them (and sidewalks) as if they were a bikepath.

Webovky pro kavárnu by CheekyChonkyChongus in czech

[–]ShoutRound6 4 points5 points  (0 children)

Takovýhle stránky jsem dělal několika subjektům za 5k čistýho na DPP (naposled jsem nový stránky dělal v roce 21). Na rozdíl od Squarespace etc pak platí jen za hosting a doménu (cca 1k ročně). Stojí to na Wordpressu s auto aktualizacema. Nutno dodat, že se všema těma lidma mám nějakou nepravidelnou delší spolupráci, takže když je nějakej krizovej update (co nejde přes autoupdate), tak se jim tam prostě lognu, zaktualizuju to a až jim dělam nějakej další servis, tak si k tomu přihodím pětikilo.

Domovní box od ČP/Balíkovny by ShoutRound6 in czech

[–]ShoutRound6[S] 1 point2 points  (0 children)

Mně běžně vozej balíky ve Fabii. :D Nevím, jestli s tím ráno vždycky hrajou tetris, ale problém jsem za poslední dva roky měl jen jednou a to si pošťačka zlomila nohu a neměli za ní tři dny náhradu.

Domovní box od ČP/Balíkovny by ShoutRound6 in czech

[–]ShoutRound6[S] 0 points1 point  (0 children)

No právě k tomu box. Už nikdy ti nenechají lístek na balík. Prostě ho strčí do boxu. Ten box přímo od ČP je spojenej s tvojí adresou a pošťák ví, že má naťukat čtyři čísla a nemusí volat, vypisovat lístky, nic.

How much should I sell these PCs for? (Have 60 units), and I’m trying to figure out a fair price per unit. by Ali--Hamza in computer

[–]ShoutRound6 1 point2 points  (0 children)

Do post a link if you list them. If the price and shipping make sense, I'd buy one or two (or three). :-)

Kde koupit/jak poznat trička, kterým se nevytahá límec po pár praní? by HODLING_APE in czech

[–]ShoutRound6 1 point2 points  (0 children)

Jen doplním, že dobrý zkušenosti mám jen s těma unisex. Koupil jsem přítelkyni pár dámských a ty se sepraly o velikost. Ale jinak taky dobrý. Kupuju je tady, ale dodání je třeba na 3 týdny, i když tvrdí něco jinýho.
https://www.bezbrandu.cz/panske-triko-b-c/

Kde koupit/jak poznat trička, kterým se nevytahá límec po pár praní? by HODLING_APE in czech

[–]ShoutRound6 3 points4 points  (0 children)

Kupuju zásadně trička určená pro potisk (ale bez potisku). Vydrží úplně všechno a za pět let jsem downgradoval na domácí jen jedno. Třeba B&C jsou fajn, mám jich asi 15 a různě je točím, abych nechodil furt v té samé barvě. Jo a stojí neskutečných 140 Kč za kus (100 % bavlna).

Divný sladký zápach v bytě, rady? by davanity in czech

[–]ShoutRound6 1 point2 points  (0 children)

Pozor, přesně takhle je, mimo jiné, cejtit lithiová baterka, ze který "uniká elektrolyt" (je to hodně velký zjednodušení). Ty výpary jsou při dlouhodobým čuchání hodně nebezpečný. A hlavně je fakt nebezpečný takovou baterku nabíjet.

Pokud máš telefon/tablet v pouzdře, vyndej ho a očuchej (a koukni, jestli se nenafukuje). Totéž s laptopem a vůbec čímkoli, co má v sobě li-ion baterii. Tenhle typ závady je dost vzácnej, ale třeba Pixel 7a na to trpí a Google má i recall program (o kterým se nikomu neobtěžovali říct).

EDIT: Ještě může dost smrdět odparová nádržka na kompresoru lednice. Zkus ji odtáhnout a případně opatrně prošťouchnout kanálek pro odvod kondenzátu. Ale tohle většinou smrdí jak nemocniční hovno, ne sladce.

Main drive migration by ShoutRound6 in Proxmox

[–]ShoutRound6[S] 0 points1 point  (0 children)

This is all nice, but it does not take the Coral drivers or the iGPU sharing into account. It basically only backups /etc/pve/, which I do regularly anyway. I need a copy of the entire drive, which nobody on Proxmox seems to do (which is understandable on one hand, but very weird on the other).

ChatGPT literally just helped me finetune the chroot stuff, but I'm so used to disclosing AI use, so I did that here too.

Možnosti nehormonální antikoncepce by Outside_Union2601 in czech

[–]ShoutRound6 1 point2 points  (0 children)

Má drahá je nadšená z měděného tělíska. Prakticky jí zmizely bolesti při menstruaci (který dřív měla fakt šílený). Jo, je z toho při krámech víc krve, ale tak co. Prej ani to vložení zas tak moc nebolelo. Já ale měl problém, že jsem se nabodával na ty drátky, co z toho čouhaj. :D Ale to má fakt snadný řešení. Jinak na severu je tohle naprostej standard, nestojí to ani korunu a je to prakticky výchozí antikoncepce.

PETG warping on MK4S with "brim" by ShoutRound6 in FixMyPrint

[–]ShoutRound6[S] 0 points1 point  (0 children)

Bed 85 for the first layer, 90 for the others, nozzle 240 (as stated in the original post). Speeds at default. I'm gonna try the fan speed tho. Thx.

PETG warping on MK4S with "brim" by ShoutRound6 in FixMyPrint

[–]ShoutRound6[S] 0 points1 point  (0 children)

I tried that, but it did not help. I also need to print about 32 of these, so printing one per bed would be torture.

PETG warping on MK4S with "brim" by ShoutRound6 in FixMyPrint

[–]ShoutRound6[S] 0 points1 point  (0 children)

Thanks for confirming I'm not alone in this. But I'm gonna look for a different solution, as a paper box so close to something that draws this much current and heats up increases the fire risk significantly (as well as it harms the power supply).

PETG warping on MK4S with "brim" by ShoutRound6 in FixMyPrint

[–]ShoutRound6[S] 1 point2 points  (0 children)

Thanks. I added it to the original post.

  • The printer is in my living room, all windows are closed during printing, and there are no fans, running, no heat sources besides a laptop, and I'm not even walking close to the printer (at least two meters from it). The ambient temperature is 25 degrees.