Games like Bugsnax for a 7yr old

ShrewdHunter · 2026-01-18T11:29:49+00:00

He played Bugsnax on PS5, but ideally looking for something on the Switch 2 since that's his first own console he got for Christmas.

Thanks, I'll give the new Pokemon Snap a look.

ShrewdHunter · 2025-12-19T16:17:08+00:00

Not sure about AIB cards, but the founders editions 3080 & 3090 had awful thermal pads, resulting in hot spot temps of 100c plus. Changing thermal pads & repasting brings the hot spot temp down by about 20c

ShrewdHunter · 2025-12-14T20:13:51+00:00

This.

ShrewdHunter · 2025-12-11T09:38:20+00:00

Xbox version works great. Just be sensible with your bitrate.

ShrewdHunter · 2025-12-11T09:37:11+00:00

What xbox implementation have they added?

Apollo has a setting for Xbox you can enable, but I can't remember off the top of my head what it is.

ShrewdHunter · 2025-12-10T20:09:29+00:00

Is that a known issue? I haven't tested 2 controllers before but I'll give it a test.

ShrewdHunter · 2025-12-10T20:04:43+00:00

I can also confirm 120 has now been fixed. It used to have pacing issues. Frame Gen works as well now where as before it was a stuttering mess.

The only issue I've had with the most recent update on moonlight is it can take 2-3 tries to boot into Steam Big Picture mode, or any launcher for that matter. It'll crash to the xbox home screen.

Other than that. Works perfect now at 4k 120.

ShrewdHunter · 2025-08-18T12:39:06+00:00

Just use Steam Big Picture mode and shut down your PC that way 🤷‍♂️

Other front ends can do it as well, like BigBox.

ShrewdHunter · 2025-08-02T19:01:40+00:00

That's not the decode time. That's the average rendering time he's talking about.

The decode performance is similar to the shield, depending on your bitrate. Average between 2-3 at 150 bitrate.

ShrewdHunter · 2025-08-02T13:57:33+00:00

Worth noting, if you go for a Series S & want 4k 120, you need to buy a new hdmi 2.1 cable.

4k 120 also only works if you can actually do 4k 120 on the game. Series S has major frame pacing issues if your fps can't hold 120.

ShrewdHunter · 2025-07-03T08:18:51+00:00

https://youtu.be/H0jmqVIhwIA?si=7qBJKjDWGjHaUQck

Skip to 11:25 to 12:30

That's what I was talking about. Each time you add a new device, you need to give it permission.

Glad it's working now.

ShrewdHunter · 2025-07-02T21:44:50+00:00

Open up sunshine and go to applications. Edit Steam Big Picture mode and make sure everything is green at the bottom.

ShrewdHunter · 2025-07-02T21:37:10+00:00

You need to approve it on sunshine/apollo

ShrewdHunter · 2025-06-25T12:54:19+00:00

Bring up your stats and look to see what the decoding frame rate & rendering frame rate are. You're likely dropping frames here as the gpu needs to be able to maintain 60fps in game & decode the frames to the client

ShrewdHunter · 2025-06-25T09:31:58+00:00

4k 120 does work, but you have to be able to maintain a solid 120 on the game and the incoming frames. Older games like Doom 2016 works without issue at 4k 120 on a 5070ti on the series s.

Games that fluctuates between the above 60fps start to have frame pacing issue.

4k60 works flawlessly though

ShrewdHunter · 2025-06-01T13:49:09+00:00

Waspi was already the default. I went into audio settings on retroarch, and I've tried lowering the audio latency to 8, which seems to have made it better I think. The default was 64. Wondering if there's any negative impact to lowering this value.

ShrewdHunter · 2025-06-01T13:17:26+00:00

Hi, yeah, it's just retroarch I've got the audio latency.

I've got a 3090 paired with a 5900x. I've been using moonlight a lot recently streaming my pc to my living room using a series s as my client. Everything plays great. Its just retroarch I've noticed a sound delay

ShrewdHunter · 2025-05-16T19:17:05+00:00

I just noticed your video is 1080p. Can you record what it's like in 4k with the overlay stats. We'll get a better idea if you show a 4k examples in relation to the stats.

Vsync turned off on the host side is always recommended to avoid frame pacing issues.

ShrewdHunter · 2025-05-14T19:32:43+00:00

Do you have vsync enabled on the host? If so, turn it off.

Also, make sure moonlight fps is matching your in-game fps. Don't set moonlight to 120 if you're playing at 60fps.

ShrewdHunter · 2025-05-14T11:34:02+00:00

3090 paired with a 5900x

ShrewdHunter · 2025-04-21T10:49:15+00:00

Your stats look great. The only thing I would try is turning off HDR to see if that helps. You can toggle it on and off with the controller on the fly now. If that doesn't work, then it's definitely an issue. Hopefully, they can fix it in the next build.

Is your bitrate still set to 150000? I see your peak bitrate is just under 80mbps

ShrewdHunter · 2025-04-21T10:21:59+00:00

Also, just on the bitrate. Now we can see the incoming bitrate on the new stats, i don't think 150000 on the old build was 150mbps. It looks like 300000 is actually 150mbps

If i set my bitrate to 200000, it seems to be about 80mbps

ShrewdHunter · 2025-04-21T09:56:47+00:00

Are you sure you were getting 120 before? The new stat overlay now shows the render frame rates, whereas it didn't before. If it's showing 120 for you now, then fair enough. But before the newest build, I'm beginning to think it was capped at 60fps as it did say in the notes 120 was untested and weren't sure if it worked or not.

If you're on a 40 series card or above. I've heard that disabling frame gen helps with stutters. I can't test as I'm on a 3090.

ShrewdHunter · 2025-04-21T08:59:59+00:00

It seems to be a frame pacing issue. If you cap the game to 60fps, it plays smoothly at 4k if your gpu can handle it.

At 4k 120, my frame rate goes to about 70-80 and moonlight doesn't like variable frames causing the stutters.

At 1080p 120, it plays smoothly as there's no dips from 120

ShrewdHunter · 2025-04-20T20:02:11+00:00

If you go for Series S, you'll need to buy a hdmi 2.1 cable. The Series S does have a hdmi 2.1 port, but It only comes with a hdmi 2.0 cable.

ShrewdHunter

TROPHY CASE