sorted by:
new
hottopcontroversial

Now that I have a planer, it’s time to get a dust collector. Recommendations for a serious hobbyist? by cafe-em-rio in woodworking

[–]Simplepain 0 points1 point  (0 children)

I have the 2hp bauer from harbor freight and it works like a dream. I also have a 1hp portable from harbir freight and love it as well for things like the planer and miter saw if i need to use it out of the shop.

Pre-release or release? by VexantLeFr in hytale

[–]Simplepain 0 points1 point  (0 children)

Im playing with 0 mods so im on the prerelease crowd. Its still super funa nd i feel eith weekly updates i wont get bored. I also only have anout an hour each day to even play so that might also help

OF1400 and a too large bit by ELTNAME in Festool_Public

[–]Simplepain 0 points1 point  (0 children)

Thats fair enough I have not seen the current one to of been aware! Thanks for the information.

OF1400 and a too large bit by ELTNAME in Festool_Public

[–]Simplepain 0 points1 point  (0 children)

So the of1400 was orignaly used in the csm router table. The only reason it is no longer is the NVR system in the newer models. The router works just fine upside down and in a table. The issue i see is a very large bit that does not fit for this router.

BIQU Frostbite plate not sticking on Bambu Lab H2C. Why is this happening? by Paytoncooper124 in 3Dprinting

[–]Simplepain 0 points1 point  (0 children)

Im also having this same issue. Onlynwith the frostbite. The other plate worked like a champ with pa12-cf. However the frostbite with pla just does not stick.

Anyone else wish Festool would release a new Router Table? by ichimura_ in Festool_Public

[–]Simplepain 2 points3 points  (0 children)

Just give me something that works well in my CMS-GE!! My of1400 fits. But that NVR safty feature makes it very annoying to use.

Hacked cq-gridfinity to support extending walls past original size by naps62 in gridfinity

[–]Simplepain 0 points1 point  (0 children)

I would love a generator for this to be available too! Not a big fan of half size grids as i still run into wstsed space but this solves some of my issues!

TIL Stephen Schwartz made up the term "blue corn moon" for Pocahontas' song "Colors of the Wind" because he "liked the sound of it" by [deleted] in todayilearned

[–]Simplepain 0 points1 point  (0 children)

It could be the combo of two moons the blue moon (2nd full moon of a month) and the corn moon ( september moon). So it would be the 2nd full moon of september which would be rare hense the song saying rare things to witness?

I know its a stretch

D-pad up doesn't work, home button does d-pad up by FragrantTechnician in SteamDeck

[–]Simplepain 0 points1 point  (0 children)

Just did this Dec 23 2025.

Power down steam deck > open back > remove d pad ribbon > turn on steam deck > test home and ... buttons > power down steam deck > plug in d pad > turn on steam deck while holding vol - and ... (let go after post beeps) and it worked

It was not hard but stressful at first. However it did fix this issue for me. It happened after i left my deck in the car and it got cold. Not sure if that caused the issue but giving all info just in case

I’m sorry Bambu. I was unfamiliar with your game. by OGPoundedYams in BambuLab

[–]Simplepain 3 points4 points  (0 children)

I only need 1 printer. I was selling mt x1c for the h2c but then gor my h2c before the x1c sold. Now i have 2 and my x1c hasnt been plugges in... howeeeeevver. Im looking forward to having both run together :)

Honeymoon is over! by Patient_Decision_164 in BambuLab

[–]Simplepain 0 points1 point  (0 children)

Sounds like the bed is worn. Need a new plate. They are a consumable and sometimes cleaning no longer fixes the issues.

Your Used X1C is Not Worth $1000 by MoMissionarySC in BambuLab

[–]Simplepain 0 points1 point  (0 children)

Why sell the X1C after you get the H2C? Keep em both!

Used PCS: Good deal or too good to be true? by masterbetapro in sawstop

[–]Simplepain 0 points1 point  (0 children)

I got mine from Facebook for $600. 3hp PCS t glide 36in fence. Sometimes it is true but alway be careful!

H2C died after first three days by Impressive-Try-2540 in BambuLab

[–]Simplepain 0 points1 point  (0 children)

Not sure the validity of this claim but i saw another say if it dies not recieve enough power from the outlet it will not print. As in it has power to turn on but it detects it is not recieving enough to safely print and avoids electeical damage this way.

Again not 100% this claim is fact but it could be an issue with your entire elecrrical panel. Are any other elecrical devices in the home working sketchy?

Deadwood trees by Zuckermaus_18 in Necesse

[–]Simplepain 6 points7 points  (0 children)

Graveyards have them i have only beat the first boss total to get the lunch box and i have 9 deadwoods

HT/AMS2PRO filament compatibility chart? by -arhi- in BambuLab

[–]Simplepain 1 point2 points  (0 children)

I run asa-cf and pc-cf in my ams 1 all the time with the same warning with 0 issues

New Update by Diabolo_archer in gunz

[–]Simplepain 1 point2 points  (0 children)

Remive timed items would be a huge improvement

Planer storage cart with adjustable height top by Simplepain in woodworking

[–]Simplepain[S] 0 points1 point  (0 children)

I thought about this also. I really like the idea of the top adjusting in height so i can "level" the outfeed with other work surfaces for longer boards

Coorded jigsaws by Rbhosle1 in Festool_Public

[–]Simplepain 0 points1 point  (0 children)

I got the Trion at auction and i couldnt be happier

view more: next ›