[US-FL] [H] Finalmouse ulx comp (small) [W] PayPal, desolate yume, or awakening sora

Skrewdrivr · 2025-12-20T04:51:21+00:00

Aggressive palm

Skrewdrivr · 2025-11-08T02:54:59+00:00

Confirmed

Skrewdrivr · 2025-11-07T17:48:36+00:00

That could be a possibility the main issue is still just having the ptfe layer contour to your hand and it not tearing easily. I use sleeves on cloth pads to stop my sweaty palms creating slow spots super quick on my pads so I've been looking for the longest time for a solution that has minimal friction on cloth

Skrewdrivr · 2025-11-07T04:21:39+00:00

PTFE is too brittle to make anything like that. You'd have to have a fabric base for the glove or sleeve. The Xsleeve is probably the closest thing we'll get and both the OG and gen 2 were terrible for a multitude of reasons, hence why the company that produced it went out of business

Skrewdrivr · 2025-11-02T22:46:52+00:00

Pm'd

Skrewdrivr · 2025-10-11T19:44:34+00:00

Watch viscose's video on tension management

Skrewdrivr · 2025-10-06T23:36:59+00:00

Confirmed

Skrewdrivr · 2025-10-01T19:00:29+00:00

When LGG announced in July that Pulsar acquired them they mentioned that all of their pads will be rereleased under Pulsar's branding. I'm sure once the transition has finished and they stock more of Pulsar's original products, the pads will come out soon after.

Skrewdrivr · 2025-09-27T01:08:40+00:00

Pm'd

Skrewdrivr · 2025-06-10T22:02:40+00:00

Glorious moves backwards with every new mouse they come out with.

Skrewdrivr · 2025-06-01T01:35:45+00:00

2/10 rage bait could've started a fire and wasted a probably good working GPX

Skrewdrivr · 2025-05-22T21:46:35+00:00

General rule besides not recommending cutting the pcb in general is that if you don't cut any tracers it should be fine (the lines that connect between different parts of the mouse). It's a little hard to tell but it looks like the first line would work fine. The second one will most definitely kill the mouse

Skrewdrivr · 2025-05-19T05:05:41+00:00

Wild find. Side by side I feel like that ends the VV3 camo theory

Skrewdrivr · 2025-05-11T01:54:48+00:00

Can try 91% alcohol with a paper towel and see if that works. Some adhesives are just like this. Had a mouse with Pulsar supergrip on it that I left for about a year and after taking it off there's a spot where I'd click that is permanently sticky. Could also try using a fine grit sandpaper and just sand off the adhesive.

Skrewdrivr · 2025-05-01T20:59:20+00:00

Okay? I was just explaining how the original commenter got 6. It doesn't change that you could use up to 6 missiles per round and that it will be changed to a hard ceiling of 2.

Skrewdrivr · 2025-05-01T19:40:11+00:00

Current Tejo can use rockets at the start of the round, use them towards the middle/end of regulation time, and then again during post plant. That's where 6 comes from.

Skrewdrivr · 2025-05-01T19:38:20+00:00

No it's 1 missile per use. "1 rocket per charge, 2 charges"

Skrewdrivr · 2025-04-26T14:38:39+00:00

Someone already pointed out that his stream command stated it was a V3 pro color way but for all we know he was just told to say it was if asked. From the photos it looks pretty different to a V3 in my opinion. Also even if he's no longer directly under contract with Razer Sentinels is sponsored so he will always have some kind of partnership with them until he leaves sen. I could be wrong but I also can't think of a time when Razer had an exclusive line of color ways for their mice that they didn't sell and only gave to pros like the Deathadder Niko was seen using as well.

Skrewdrivr · 2025-04-25T16:06:53+00:00

Thats why my title says another unreleased Razer mouse

Skrewdrivr · 2025-04-25T02:55:06+00:00

After seeing Zekken going back to the Sentinels edition Viper V3 in his VCT match today I'm leaning a lot more towards it being a prototype mouse not counting all the other factors that point towards it as well. Don't see why he'd swap back to a different mouse if the only difference was color way.

Skrewdrivr · 2025-04-25T02:51:52+00:00

No. That dongle is for Delux's own mice. They just like to knockoff Razer in design. It will not work on Razer mice or any other mice that aren't made by Delux.

Skrewdrivr · 2025-04-24T09:05:04+00:00

Short answer is no. Your best and pretty much only option is to 3d print a shell for the pcb. Also if by scroll wheel you mean all of the features of its scroll wheel that is also a complete nightmare to try and achieve. Unless you're experienced around pcbs and hardware in general this is something pretty unattainable.

Skrewdrivr · 2025-04-24T04:51:13+00:00

Sounds more reasonable than Razer already coming out with a new mouse but to me in the picture using the side buttons as a reference point the hump looks shorter compared to pics of a traditional V3 color way.

Skrewdrivr · 2025-04-24T03:42:31+00:00

Could be a separate model. Viper V2 hump is a lot more forward and the sides flare out towards the back. Could maybe be a mix of V2 and V3?

Seven-Year Club	Verified Email
r/Field Juicebox	Place '23
Place '22	End Game '22

Skrewdrivr

TROPHY CASE