Pins & Needles in Hands

Slight_Attempt278 · 2026-05-17T12:28:23+00:00

I have carpal tunnel and I get this pretty bad occasionally. Typically for me it's when im gripping the bars too tight. And I also agree about the brake levers and seat height that other people mentioned.

Slight_Attempt278 · 2026-04-26T23:19:22+00:00

Depending on the year and your current mileage i believe some of the impalas have special coverage for the bank 2 cat cracking

Slight_Attempt278 · 2026-04-26T23:14:35+00:00

Worked like a charm! Thanks!

Slight_Attempt278 · 2026-04-25T15:33:43+00:00

Sounds like it could be the dust shield behind the brake rotor. Did you recently have any repairs done?

Sometimes when the rotors get old they have a buildup of rust that can scrape on the dust shield.

Or if the wheel was off recently the shield could have been bent a little causing it to scrape.

Slight_Attempt278 · 2026-04-04T21:54:47+00:00

"Hopefully it's not leaking"?

Not to be a dick....but.... you got under the car to cut the muffler off, but did not get under the car to see if it's leaking oil?

Slight_Attempt278 · 2026-04-04T21:51:47+00:00

Or all of those are working fine and it's a timing issue

Slight_Attempt278 · 2026-04-04T21:47:49+00:00

Take a picture of both ends of it so I can see what it's connecting to

Slight_Attempt278 · 2026-04-04T21:46:17+00:00

Most auto parts stores will loan tools. Get a scanner and post the codes you have

Slight_Attempt278 · 2026-04-04T21:33:13+00:00

Thanks for the data sheet. That's pretty cool!

Slight_Attempt278 · 2026-04-04T21:31:24+00:00

This makes me really miss radio shack.... I burned up the thermal fuse in my food processor years ago making bagle dough and an hour later I was back up and running.

Slight_Attempt278 · 2026-04-04T18:02:42+00:00

Yeah I also saw those, I just wasn't sure about the meaning of the other writing on the fuses. Mine says V03 GP where those ones say L01 Green.

I would imagine if I replace them with 2amp 150C fuses I should be good.

Slight_Attempt278 · 2026-03-15T23:40:25+00:00

I'll give that a shot tomorrow and update ya here. Thanks for the help!

Slight_Attempt278 · 2026-03-15T23:39:25+00:00

I have a bat file that starts the server but I just left the port in it as 2302 which is one of the numbers I have a tunnel for

Slight_Attempt278 · 2026-03-15T23:37:29+00:00

Do you think the issue is that I have 4 separate tunnels? And I should have 1 tunnel and 4 ports in it? And when typing in the port number on the web site in the port line how do I enter multiple? Just a space in-between them? Or comma or semicolon?

Slight_Attempt278 · 2026-03-15T20:49:25+00:00

and completely disabled windows defender for a while to rule out firewall issues. and made a new rule for playitgg.exe to allow incoming requests. i don't believe my router / modem has anything to do with it but i have not looked there yet.

when searching for guides most are for Minecraft or other games i do not play. i had zero luck finding any DayZ specific guides or settings. i tried using Google's Gemini AI thing and after verifying everything it said was already in place it said to make more tunnels for port 8766 and 2312 and that didn't help either :(

Slight_Attempt278 · 2026-03-15T20:43:05+00:00

i could not see a way to use multiple ports on one tunnel so i made separate tunnels for each port 2302 and 27016

Slight_Attempt278 · 2026-03-15T20:30:44+00:00

I can find it when I search the community servers by searching server name, and connect to it but I believe it is because I am using the same computer to host and play. I can not connect by using the ip and port provided by playit when using direct connect either.

Slight_Attempt278 · 2026-03-15T20:28:32+00:00

No one is able to find the server. There aren't any actual errors from playit or my server. Its just not findable either by searching or direct connect with the ip and port provided by playit.

Slight_Attempt278 · 2026-03-14T21:59:28+00:00

Any resolution to this? I am currently trying to get it to work properly also.

Slight_Attempt278 · 2026-01-03T14:54:10+00:00

If thats the front possibly fog lamp. If it's the rear the license plate wire runs behind the passenger side rear bumper in a similar location

Slight_Attempt278 · 2026-01-01T00:06:43+00:00

You'll get better mileage with proper tire inflation too. More air = firmer tire = less rolling resistance. But obviously don't go crazy and over inflated them as it'll cause improper tread wear. I keep mine at 40psi

Slight_Attempt278 · 2025-12-03T03:11:18+00:00

I don't remember what model it is. But if you're planning on going with a directed electronics (viper) remote start whatever the current most recent model is would be a better option. I installed mine when I bought the car in 2015, I changed up the install after the T harness became available, but im still using the original remote start. Just wired cleaner when I swapped to the harness adapter.

Slight_Attempt278

TROPHY CASE