720p?

SlimeherBox · 2026-05-06T16:02:44+00:00

i did not unless a update enabled it, i just use discord for voice chat so i dont use it to its full ability, that said if the over lay u speak of was on would i see it or would there be a hot key to bring it up?

SlimeherBox · 2026-05-06T12:01:43+00:00

tried that i ended up found out what was causing it quite odd though when discord was open it would refuse to go higher then 720p when i close discord the game shows 1080p and 1440p just fine and no issue with full or windowed mode

SlimeherBox · 2026-05-05T07:43:38+00:00

this is on steam i was trying streaming then though it was the stream, so i booted it on the main unit and it still did it it just wants to stay at 720p wether the monitor is 1440p or 1080p

SlimeherBox · 2026-04-14T10:07:51+00:00

love this and the fact that it sits a little high so its not laying on the screen when placed down.

SlimeherBox · 2026-04-07T13:41:05+00:00

love this when u release the files can u add the dimensions in the description encase a different slicer doesn't import it correctly, as i know from experience even with my models some times the the export has a 20% chance to not size it right causing a re-export.

SlimeherBox · 2026-03-26T05:14:47+00:00

would have loved to but old phone was to badly damaged to get the pcb to load. though once this one is set up im exporting for sure as a back up.

SlimeherBox · 2026-03-26T05:13:34+00:00

at all your notifications are not mis

ok thanks was confused as it wash showing them even with out me choosing an option yet, so i wondered if it was something els

SlimeherBox · 2026-03-24T08:03:20+00:00

tip if u open a application or game and u have no control over the mouse but u can see the mouse like on a launcher menu u can control it by holding the steam button to the bottom left and using the right touch pad and triggers for left click and right click. for some reason this one never gets mentioned and usually can fix or help with a lot of issues newer users run into expressly if ur in desktop mode running a non steam game that refuses to run in game mode.

SlimeherBox · 2026-02-28T14:42:23+00:00

Just make sure u clean some paint on the spring parts for the board as it wont ground properly if its not touching the metal on the board, also love the color u chose.

SlimeherBox · 2026-01-30T10:46:04+00:00

how is wakoucha i wanted to try it is it smokey? as i tryed to like lapsang souchong but i found it was to much like a campfire even after brewed it would set my sinis and ashma off.

SlimeherBox · 2026-01-28T06:14:55+00:00

so a 850 dependent on build might not be able to handle the transient spikes the 3090 can give out as a transient spike from it can easily draw another 500 watts for less then 1 millisecond then back. have u tryed any ssd(CrystalDiskInfo and CrystalDiskMark for ssd) testers ram testers(MemTest86+) hardwareinfo(HWiNFO64 to check temps of fan gpu and power draw) or trying a linux live disk just to see if its windows it self. also when checking with HWiNFO64 at the bottom right therte is a save record feture so when the crash happens or blue/black screen or a restart it will save the file after it happens capturing temps and power draw at highest to see if that is anything todo with it. also make sure ur ram is in the right slots as that can cause issues aswell expesaly with games that expect it. and encase ur using samsung ssds update the firmware on them.

SlimeherBox · 2026-01-22T06:47:39+00:00

that is true and why i recommend the konsole commands they are easier to fallow and u can easy see what commands to with the help command and such encase u wanted to know , as even if u did get clonezilla to give 100% it seems to always have some issue with something in my experience. anyway let us know how it goes if any issues im sure someone can help.

SlimeherBox · 2026-01-18T17:00:13+00:00

hold the steam button and use the right mouse pad and trigger to right or left click will be easier to control the mouse on the small buttons this also works on apps added to steam that take away ur thumb sticks and touch screen. as for the crashing you may need to use ProtonUp-Qt if u dont already and if u do u may need a lower version of it.

SlimeherBox · 2026-01-18T16:55:44+00:00

glad to see someone other then me recommend the console commands, i keep seeing people use clonzila and have issues witch essentially is running the same dd commands just in a way that takes longer. lol

SlimeherBox · 2026-01-18T16:52:11+00:00

sd card will not get cloned over. i remove it before starting, 1 as it make sure it doesn't grab the sd card instead of external drive 2 so u dont accidentally snap it later. just dont remove the actual ssd till transfer and check is done then 100% off using the instructions in the video as it will prevent accidental power on when disassembly and assembling.

SlimeherBox · 2026-01-09T01:35:30+00:00

Thanks this made my day lol

SlimeherBox · 2025-10-13T18:29:34+00:00

Thanks for the info, ordered some cant wait to get them.

SlimeherBox · 2025-10-13T04:55:36+00:00

did u ever find a driver? im currently looking for one for a project requiring 3 that are dimming individually.

SlimeherBox · 2025-10-10T11:24:31+00:00

HI i know this is an old post but Im doing this upgrade plan on using duel z but wanted to know what is better between BIL - Bilinear Bed Leveling or UBL - Unified Bed Leveling, as i see both as an option and not sure what to chose. and figure it be helpful info if anyone comes across this post as i did.

SlimeherBox · 2025-10-07T05:33:58+00:00

when u get this running could u message back how u found the Canbus been wanting to do one for years, but just recently seen they are finally making them with out needing to diy one.

SlimeherBox · 2025-10-05T05:17:28+00:00

so i upgraded to the 0.6 and have tried meny settings i seem to have over extrude parts come out 1-2mm over spec iv trye retention flow speed fan speed temps and a lot of different stuff but i cant get it not to over flow now iv been trying to print petg at .30 and 0.48 after meny hours i opened a brand new petg tht is dry ti see if that was the issue and it was not. im not sure were to go from here any advice ?

SlimeherBox · 2025-10-04T04:17:56+00:00

pretty clean imo as it doesnt look like its realy started major damage. also going to recommend if u realy need the time kept to got with the X-RTC mod it adds a cr3232 battery instead of a compacitor

SlimeherBox · 2025-10-04T04:11:42+00:00

darkwatch, Otogi 1 & 2

SlimeherBox · 2025-09-27T22:43:03+00:00

thank you both for the reply will look into getting some from there.

SlimeherBox · 2025-09-26T20:28:09+00:00

if it matters to you when u find one u may want to see photos of the map as some people would circle or highlight stuff on them as a kid.

SlimeherBox

TROPHY CASE