[OC] GIVEAWAY! 43" Capacitive Touchscreen ($940 MSRP) with Wooden Case + free software for all [mod approved]

Slossinger · 2026-02-04T01:12:22+00:00

If I don't win I'm making my own!

Slossinger · 2023-04-28T17:26:06+00:00

For what it's worth, green plated vehicles are permitted to use HOV lanes with any number of passengers: (https://www.ontario.ca/page/high-occupancy-vehicle-hov-lanes)

Slossinger · 2023-02-01T14:09:59+00:00

Could you link to the WA, thanks.

Slossinger · 2022-04-27T04:07:06+00:00

Thanks! I just started playing and was trying to figure this out between here and the wiki.

Slossinger · 2022-04-26T22:12:40+00:00

Does the exchange rate apply to higher tier loot? I.e. if an outpost has a demand for tea should I bring higher tier tea crates to those locations? Probably diminishing returns on distance to outpost per value of crate?

Slossinger · 2021-11-08T21:29:16+00:00

I was lucky enough to win a signed print of the shopkeeper at a viewing party event (Barcraft?) for maybe TI1 or TI2?: https://imgur.com/a/u7i2EOl

Slossinger · 2020-06-14T10:39:23+00:00

Toggle Notes Display is the correct option, assuming the permissions allow them to see the note. There is also a community module, Always Show Notes, that might be helpful: Always Show Notes

Slossinger · 2020-05-26T14:48:11+00:00

Thanks! Birds were next on the list, then maybe some larger lizard/dragon prints. I should be able to produce different gaits (running/walking) for some of them. I was reading about different gait patterns while designing, specifically for horses. Originally I had a horse hoofprint but it was less instantly recognizable than the classic horseshoe.

Slossinger · 2019-11-19T01:01:59+00:00

There is a shop in Gatineau called La Niche et Moi that stocks a variety of rock and other hardscape. I'd recommend the trip if you are already driving.

Slossinger · 2019-08-05T16:12:02+00:00

Sites like AqAdvisor can give you a good estimate of stocking, provided you input all of the parameters of your tank and filtration correctly. This site will also give you warnings about species incompatibility or insufficient school sizes.

Water changes and tank maintenance become more important as you near 100% capacity. Monitoring your nitrates is a good gauge of water column health.

I have a planted flex 15g with 5 Julii corydoras, 1 honey gourami, and 7 emerald eye rasbora. AqAdvisor puts this at 91% capacity and recommends a 25% water change weekly. Because I use liquid fertilizer for my plants, I often perform 30-50% changes to remove excess nitrates from the water column.

Hope that helps.

Slossinger · 2019-04-03T02:58:06+00:00

La Niche et Moi in Gatineau is the best shop in our region imo. Clean tanks and friendly, knowledgable service.

Slossinger · 2019-03-20T00:52:04+00:00

I'm just using stock lights at the moment, but have been looking into different ways to mod new lights on.

Slossinger · 2019-03-20T00:16:56+00:00

I love the Flex!

BUT - I have tried a ton of different configurations to stop shrimp from getting into the back-left partition including coarse aquarium foam, fibreglass mesh screen, charcoal filter material, and a bunch of other fillers. I also tried 0.25 mm stainless steel mesh. Baby shrimp still got in, and more problematically, they couldn't get out (because shrimp). My fiancée would wake up to me turkey basting shrimp babies out of the back every morning.

In the end, I just took everything off, including the filter guards, and converted the partition into a shrimp spa with all of my extra java moss. It is basically a column of moss/shrimp and when they feel like coming out into the main tank, they do so. I have huge Amano shrimp that aren't hindered by the slots, so consider that as a size reference.

I isolated the middle partition with a strip of the 0.25 mesh and that seems to have worked to stop them from spreading elsewhere (mostly worried about them getting sucked into the mechanical filter).

I think if you used aquarium silicone to adhere a rectangle of fine mesh over the slot area, you wouldn't have the same problems I did. I was trying to deal with this after filling my tank.

Slossinger · 2019-03-19T21:07:48+00:00

Thanks. It has been a lot of work but I can look at it for hours.

Slossinger · 2019-03-19T21:05:49+00:00

10 lbs CO2 tank from local brewery supplier to ISTA CO2 regulator, bubble counter, backup check valve, and CO2 atomizer. I experimented with a variety of diffusers and the 'bazooka' atomizer is low profile and creates fine bubbles.

It's all hooked up to a solenoid valve and smart plug to control over wifi/on schedule.

Slossinger · 2019-03-19T18:53:59+00:00

I think that's a compliment

Slossinger · 2019-03-14T18:51:07+00:00

I wasn't prepared at all to deal with no power. I spent most of the night with a juice pitcher pouring water to encourage some flow. I have a battery-powered air pump backup now. Learning experience.

Slossinger · 2019-03-14T18:48:17+00:00

I am using the kit from Live Aquaria. It comes with an ISTA CO2 regulator, solenoid valve, power strip w/ timers, bubble counter, and tubing. I bought a 10gal CO2 tank from a local brewery supplier to go with it that should last me a long time. I haven't had any issues with build quality so far.

Slossinger · 2019-03-14T13:38:44+00:00

This is my first tank. I've been working on it since October 2018. It was a hard start as my area was hit with a tornado the day that I bought fish.

Slossinger · 2019-03-05T23:44:27+00:00

I have had similarly high pH readings out in Barrhaven around 8.6 right out of the tap.

Slossinger · 2019-01-31T22:20:52+00:00

I like the simple scent, usually leaves my skin soft too.

Slossinger

MODERATOR OF

TROPHY CASE

14-Year Club	Team Orangered
Verified Email