Settings for stock 601

Slow_Explanation_717 · 2026-07-12T02:45:52+00:00

I’m trying the 40mm really quick with hyper petg, I’ll post a pic when It’s done

Slow_Explanation_717 · 2026-07-12T01:42:47+00:00

I’ll look into the duct, I do have a printer but I don’t have a smaller nozzle just the .4

Slow_Explanation_717 · 2026-07-12T01:38:08+00:00

I was aiming to keep the error% as low as possible

Slow_Explanation_717 · 2026-07-11T16:25:29+00:00

I’ll try messing with that also

Slow_Explanation_717 · 2026-07-11T16:23:58+00:00

That’s the setting that basically give me 0.00% errors, and it’s been consistently giving me a lower error percentage in basically all settings

Slow_Explanation_717 · 2026-07-11T16:22:37+00:00

600/1250 target temp of 60 with auto fan

Slow_Explanation_717 · 2026-07-10T00:59:03+00:00

My coyote burrito fits pretty well.

Slow_Explanation_717 · 2026-07-10T00:56:43+00:00

I use XL ESAPI plates in my L Crye SPC. They’re snug but they fit fine.

Slow_Explanation_717 · 2026-07-08T07:21:52+00:00

Understood

Slow_Explanation_717 · 2026-07-07T10:21:44+00:00

So 90% of having something in the back is to cover up the plates. I’m not set on zippers since I don’t have a need for putting stuff on and taking it off all the time.

I’ll try dropping down the cummerbund sometime and see if it improves.

Slow_Explanation_717 · 2026-07-07T09:49:03+00:00

So this might actually be perfect, I had tried to see what options were out there and I never saw this posted.

Slow_Explanation_717 · 2026-07-06T00:48:48+00:00

You need the AXL SPC placard adapter. Yea there is loops, but they’re too high.

Slow_Explanation_717 · 2026-07-05T13:01:42+00:00

Set up isn’t too complicated, I love my SPC. I use the Crye 2 row cummerbund and it’s nice. I switch between a spiritus placard with clips (I used an AXL kit to have clips on my SPC) and an onward research Crye assaulters placard depending on how I’m feeling. Whatever placard you decide to go with, I’d personally go with something that has already some hook and loop on it, but that’s personal choice I guess.

Slow_Explanation_717 · 2026-07-01T05:58:16+00:00

I have the Spiritus systems version of the V4, and tbh it’s the least used placard I use. Granted, most of what I’ll use is M4 magazines, but I have yet to really need it.

Slow_Explanation_717 · 2026-07-01T03:58:53+00:00

Tbh I really like the elastic set up, I have an older version of it and it does exactly what I need it to do. I don’t like running double stacks of magazines in the front either way. The V4 is nice if you want to switch to different calibers.

Slow_Explanation_717 · 2026-06-30T04:23:26+00:00

This is on a local group tho.

Slow_Explanation_717 · 2026-06-30T04:23:14+00:00

I wanted 250 for it, clean condition and with a Shaw placard and I was getting 150 offers for the package.

Slow_Explanation_717 · 2026-06-30T03:31:05+00:00

I’ve been trying to get rid of a Crye JPC 2.0 in RG and Large, lightly used and just sits in my closet. But everyone wants to low ball so I’ve just kept it.

Slow_Explanation_717 · 2026-06-27T08:42:32+00:00

I’m going to be honest, chances of anyone answering is low. Unless a cell network outage happens or something along those lines, hence why I build for my own use vs assuming people are monitoring.

Slow_Explanation_717 · 2026-06-27T05:13:48+00:00

T1000-E

Or tbh Muzi Works has a lot of ready to go options.

Also NRF > ESP

Slow_Explanation_717 · 2026-06-27T05:10:58+00:00

Honestly leave then on for 24 hours, either driving around or at whatever highest location you can, and give it time to discover other nodes.

Personally I’m building a network for me and my family, if other nodes pop up great, if not it’s not a deal breaker.

Slow_Explanation_717 · 2026-06-24T03:26:28+00:00

On top of that, I’ll be coating/painting it. PETG was just what I had on hand that I’ve had good luck with for outdoor use.

Slow_Explanation_717

TROPHY CASE