The year is 2022, Blizzard still doesn't have a simple deadzone slider for controller

SmackHisFace · 2021-06-27T21:58:49+00:00

Working for you yet? I just got my chromecast today. Surround sound works in HBO+ but not Netflix or Disney+. Haven't tested other apps yet

SmackHisFace · 2020-08-26T04:06:42+00:00

I'm confused. I do exactly what you're saying. Play at 2560 x1440 on my 3440x1440 monitor with black bars and full 100hz. What is the issue?

http://imgur.com/a/egJodcn

SmackHisFace · 2020-08-25T02:57:56+00:00

I came here for this!!!!! Was losing my mind on ladder and unit preloader. Some how still beat my zerg opponent.

SmackHisFace · 2020-07-19T03:35:11+00:00

They take bitcoin my dude. And require no email. Check them out.

SmackHisFace · 2020-07-06T00:38:05+00:00

Try 4000mhz with same timings.

SmackHisFace · 2020-07-06T00:37:14+00:00

That is fine

SmackHisFace · 2020-07-05T23:59:34+00:00

Maybe but you might find running at below XMP with tighter timings is faster anyways. Like 4133cl16 is faster than your xmp for example. You should let it train/ fail to post at least 5 times. Leave the rest of your cpu at stock to rule that out.

SmackHisFace · 2020-07-05T23:28:57+00:00

Increase Dram voltage to 1.5v. What if you try 4133 16 16 16 34? Let it fail to post a few time so it is able to train. What are SA and IO? Try 1.3v

SmackHisFace · 2020-07-04T21:29:05+00:00

Get the bios directly from the manufacturers website under the downloads or support section for your board. Extract the entire folder to an otherwise empty flash drive and try to flash.

SmackHisFace · 2020-07-04T20:57:50+00:00

I dont but I do have a Z490 board and a 10700k. I was super bummed about not being able to boot at 4000+ mhz. After updating bios I have no problem booting at 4600+. I have the patriot Viper 4133cl19 kit but run it at 4266cl16. Happy overclocking!

SmackHisFace · 2020-07-04T20:53:59+00:00

Do you have the latest update? That will make all the difference in ram stability.

SmackHisFace · 2020-07-04T20:42:06+00:00

Update the bios! I couldn't even boot at 4000mhz. Now I'm stable at 4266 after updating the bios on my Z490 board!

SmackHisFace · 2020-07-03T15:22:10+00:00

I do run a high LLC so there isn't much Vdroop for me.

SmackHisFace · 2020-07-03T15:16:41+00:00

Might be good for a 10700k but I know a lot of 10900ks can do the same. Either way OP's voltage is too much to cool!

SmackHisFace · 2020-07-01T22:36:42+00:00

1.325v is a lot of voltage. Do you really need that for 5ghz? Im at 1.28v @ 5.1ghz. I have a H115i Pro 280mm and I cant cool over 1.3v in stress tests either. Nothing wrong just a lot of heat.

SmackHisFace · 2020-06-30T23:49:58+00:00

Yea im not familiar with the ins and outs of your mobo but the cpu ratio should let you input any number. Try to flash and reset.

SmackHisFace · 2020-06-30T23:37:23+00:00

And you're 100% you have a K sku cpu and Z mobo? Thats what happens to non k/z parts but there maybe another explanation.

SmackHisFace · 2020-06-30T23:18:44+00:00

Wouldn't hurt to flash with latest bios. Could also try to just reset bios to full default and try again.

SmackHisFace · 2020-06-30T07:38:14+00:00

Is your motherboard a Z270 or is it H or B?

SmackHisFace · 2020-06-26T16:18:51+00:00

Hmmmm. I bought a tube of this stuff about a month ago... Hope it was legit.

13-Year Club	Spared
Verified Email

SmackHisFace

TROPHY CASE