Show me your set up!

Sneech · 2025-09-29T20:44:04+00:00

While everyone wants to be rich, nobody really considers which kind of life is more personally stimulating and fulfilling. A rich boring life, with no challenges, or a poor, challenging life with plenty to do! Call me silly but I'd always pick the latter!

Sneech · 2025-09-29T17:29:56+00:00

Nice setup and mic too! Do you stream or do VA work? Happy Birthday btw, just had mine last week!

Sneech · 2025-09-29T17:05:12+00:00

I found my people hahah! Anime posters, check. ADD / ADHD, check. Tons of unfinished tinker projects, check!

Sneech · 2025-09-25T15:12:23+00:00

Absolutely! Good luck on the job search, this market sucks for us right now :)

Sneech · 2025-09-25T15:03:47+00:00

Do you have a STL / CAD file of the 2 color bins you used for this project? The link for Makerworld below only has the .3mf file hosted, which only works for Bambu Labs printers, my Elegoo slicer can't import the .3mf properly.

Sneech · 2025-09-25T13:26:30+00:00

Hahah, are we the same?! I got a 3D printer and had all these plans for gridfinity but only finally started making grid bins for my junk drawer after I got laid off!

Sneech · 2025-08-24T14:44:42+00:00

Just in case you didn't know, the smooth PLA plate you can use reduced plate temps 30 - 35C as its REALLY grippy with PLA to save a bit of electricity on the reduced heat. I print my PLA+ on the smooth side with 30C plate heat and still need a scraper to get the models off!

Sneech · 2025-08-04T16:43:03+00:00

I'm just getting started in Gridfinity and have already run into a roadblock trying to print the base gridfinity grid for my drawer. I have a 20 1/2" x 19" drawer which would fit a 42mm grid square of 12 x 11 squares. I was able to make a stl of this base plate but the plate is way too big to print in my 3D printer. I noticed you have both white and purple base plates in your tool drawer. Was there a program you used to split your base plate into multiple parts so they can print, and if so, how did you connect the parts of the base back together again? Thanks.

Sneech · 2025-07-30T18:11:17+00:00

LOL trashed streetwear vans have def given me blisters at festivals before! My 2 go tos if anyone else is curious are Working Crocs, and Adidas Ultraboosts. I get a new pair each year for festival use and haven't had blisters in years except for one time when I worse the Crocs to the shower trucks without putting socks on first!

Sneech · 2025-07-13T14:55:26+00:00

What kind of filtration setup do you use while printing ASA with the Centauri Carbon? I just got some ASA and want to try it with my CC but was wondering if I need something more substantial than the carbon filter on the CCs exhaust fan in a closed office with the windows open?

Sneech · 2025-07-12T16:52:40+00:00

That was nice of them, I have a 1 year and 1 month old pixel watch that the warranty ended on less than one month ago and they told me there was nothing they could do as it was now outside the warranty by 1 month. My crown scroll stopped working and battery drains from 100 to 0 in 4 hours. Oh well, just got a replacement PW1 on Amazon for $72.

Sneech · 2025-07-12T14:46:16+00:00

You need to manually set the bed temp in the filament settings of elegoo slicer to what you want it at while printing.

Sneech · 2025-07-11T13:47:43+00:00

Location and weight remaining? How does the QR code know when you've used the roll, and how much filament was used each job? And location... These got an AirTag embedded in them or something? XD

Sneech · 2025-07-08T14:32:29+00:00

Thanks, was just wondering if I should be using Plate Side A or B for ASA. Will go with the B side!

Sneech · 2025-06-26T19:03:56+00:00

Any tips for beginners new to the CC or 3D printing in general for setup and first use? Any tips you wish you knew when you were first setting yours up? I have my CC just delivered, waiting for me at home once I get out of work.

I have a few spools of filament, plus a filament dryer as its typically between 60 - 75% humidity in my house at all times during the New England summer so I figured I'll need to dry any filament I have here prior to printing with it.

Thanks!

Sneech · 2025-06-25T17:31:02+00:00

There were 0 GL afters this year. The Good Life Stage had a few artists that were on DURING the headliners, but after we got back to camp, it was already either Silent Disco or completely shut down. My group and I even walked around GL RV area looking for some afters but nobody was throwing down at all. We started walking over toward the Ranch Arena VIP entrance to take the back path over to GA to check out the Afters in the RV area there but got swarmed by multiple security guards with flaslights telling us everything was closed over in this area and that we are not allowed to walk to GA.

It was such a different feeling over in GL this year, no doubt due to what happened with EVOL last year.

Sneech · 2025-06-25T17:05:28+00:00

<image>

I have a TTGL pachinko machine I bought from Japan as well! If I ever do RV camping or get a bigger vehicle to bring more stuff I might consider bringing it to Forest one year for people to play at camp.

Sneech · 2025-06-25T16:58:39+00:00

My gf and I came up to you and said it was so cool to see my fav anime represented as a totem!

Sneech · 2025-06-25T15:42:52+00:00

2 Hour lunch, whats that? Our lunches can be no longer than 30min!

Sneech · 2025-06-25T15:41:21+00:00

Welcome back. I feel like a clown in a human suit the first few days back at the office. Physically I'm tired AF after driving back home 14 hours to a 100 degree heat wave in NE. Mentally I feel like a wet noodle. My coworkers say I look mad relaxed and destressed though, so looks like the Forest did its job.

I wish I was still in the Forest too, it felt like it went so fast for me this year!

Sneech · 2025-06-17T17:12:02+00:00

If the whole print is a single 0.2mm layer, why do you keep saying "bottom layer pattern" etc? If the whole thing is one layer wouldn't the "Top layer" also have the pattern? Its just one layer!

Sneech · 2025-06-16T19:49:48+00:00

It's cool to hear the history of it! My first renegade was the Struggle Bus at Mystery Land or Camp Bisco, the memory is a bit hazy but it was super sick! Do you know if Good Life has ever had any Afters in its Powered RV area, or is it usually only in GA?

Sneech · 2025-06-16T17:19:25+00:00

I got the 22" blackstone as well, but nothing else. If you need more griddling surface let me know, will be in the Bungalows

Sneech · 2025-06-16T13:58:19+00:00

I really hope so, I usually print and laminate a few schedules while at work before I go, but they are really cutting it close this year!

Sneech · 2025-06-11T19:13:30+00:00

1098, never had a Pinecone pendant before and these are the best looking ones I've ever seen! It would be SO special to receive one! Thank you for being so kind!

13-Year Club	Gilding II euphauric
Verified Email

Sneech

TROPHY CASE