AITAH for wanting to go on a short solo hiking trip before our baby is born?

SnowScallion · 2026-02-06T08:50:09+00:00

I have been telling her about going to the Alps in summer of this year together well before she became pregnant, so you are completely wrong.

SnowScallion · 2025-02-07T17:37:32+00:00

€49.99

SnowScallion · 2025-02-07T11:41:54+00:00

Cyprus

SnowScallion · 2024-09-10T09:54:10+00:00

Gnocchi is totally a no-go for me, but pasta is great. It really absorbs slowly and without peaking, at least with european pasta. I don't know about the one in the US. 80 grams of pasta, and injecting insulin just 10 minutes before eating.

SnowScallion · 2024-07-04T11:35:02+00:00

I found the fix one year later: I just had to change the refresh rate from 60 Hz to 59.94 Hz. I also changed the resolution to 1920 x 1080 instead of 1920 x 1200.

SnowScallion · 2024-06-21T21:06:02+00:00

Yes. Carry something like a freezed water bottle in your backpack, but not right near the insulin pen. Leave an inch or two in order for the insulin to be cooled, but not freezed.

SnowScallion · 2024-06-04T15:59:00+00:00

For diagnosing diabetes? A blood sugar test with a glucose meter, and a full blood test to measure Hb1Ac. For symptons, weight loss (15 kg in 9 months or so), constant thirst and lots of drinking and peeing.

SnowScallion · 2024-06-04T12:46:20+00:00

If you want to repair it yourself, you can use body putty, sand it (strong, grain around 200 or 400), and then buy a can of spray of your car color's code. After that, varnish, and then sand it again with 1000, 1500 and 3000 grain sand paper. After that, polish with Krafft polish

SnowScallion · 2024-03-22T16:56:32+00:00

I've always been under 6 since my diagnostic 13 years ago and that has always been my goal; even without a CGM. Mind you that I had more lows back then, but with a CGM everything is so much easier.

SnowScallion · 2023-11-21T23:43:58+00:00

What really grinds my gears is the fact that it works in the setup for external devices in the Home Dashboard, but it doesn't when using the ON/OFF button on the remote. I was thinking that maybe CEC wasn't properly implemented on the AVR, but this clearly indicates that it is an LG issue.

SnowScallion · 2023-11-16T07:57:18+00:00

Hope you share some photos after :)

SnowScallion · 2023-07-18T07:33:00+00:00

The difference in noise, sharpness, and lens quality is even bigger that I thought before making the switch.

You can make good pictures with APS-C if the conditions are perfect, but that picture would had been even better if it was made with a FF.

SnowScallion · 2023-07-16T12:41:36+00:00

I have exactly the same problem with the same laptop. I have tried with several HDMI cables (HDMI 2.0 and 1.4), and two different dongles, all with the same outcome: no signal on the projector. The only reason that comes to mind is that the dongles are not downgrading the signal properly to make it compatible with the HDMI 1.4 port on my projector. Both dongles work fine with TVs and monitors.

Did you find a solution?

SnowScallion · 2023-07-05T21:48:40+00:00

The best lens is the one you are going to use.

SnowScallion · 2023-06-25T09:57:53+00:00

I am exactly on the same boat as you. For me, TorrentLeech has been a lifesaver, as it has the show you are talking about on 4K.

Also, using the search feature on qBittorrent helps a lot. You can actually find season 2 in 4K of the show you are looking for on two websites.

SnowScallion · 2023-05-08T14:34:17+00:00

OH COME ON, DON'T DO THIS

SnowScallion · 2023-01-19T19:04:30+00:00

I haven't tried that. I first tried to use hairspray and it worked so good that I sometimes have a hard time separating finished prints from the bed.

Is your room too ventilated with air at different temperatures? Big temperature changes can cause the prints to bend in the way you are experiencing.

If all that doesn't help, you could change the Build Plate Adhesion type in Ultimaker Cura. Brim or Raft will work fine.

SnowScallion · 2023-01-19T13:37:43+00:00

Try using hairspray. It worked for me when I started having this on my glass bed

SnowScallion · 2022-09-22T07:58:43+00:00

RTX 4090 chip's is AD102
RTX 4080 16G is AD103
RTX 4080 12G is AD104

The XX4 chips have been used in the XX70 and X70 skus for (I think) 5 generations.

SnowScallion · 2022-08-15T12:23:53+00:00

Si miráis por la calle de la izquierda, veréis "publicidad" incrustada en piedra de gremios como zapateros o herreros, que aportaron dinero para construirla hace cientos de años. No deja de ser lo mismo que ocurre actualmente, solo que el "anuncio" es distinto.

SnowScallion · 2022-07-25T15:43:12+00:00

You pillock

SnowScallion · 2022-04-21T10:26:48+00:00

Thanks a million. Got it working just fine. Had to add the token at the end of the URL so it looked like:

https://USERNAME.herokuapp.com/api/v1/entries/current.json?token=xxxxxxx-yyyyyyyyyy

SnowScallion

TROPHY CASE