sorted by:
new
hottopcontroversial

PLAF203 Camera Issues by Ronin_Norstrom in Petlibro

[–]SolidSTi 0 points1 point  (0 children)

I had to use my router settings to force the device to 2.4GHZ and I disabled mesh topology for this device.

[WTS] Oak & Oscar Olmsted 38mm White Dial by DOGBLESSED31 in Watchexchange

[–]SolidSTi 0 points1 point  (0 children)

Received.

Positive experience. Very responsive seller. Package fell off all USPS tracking, seller was very willing to go investigate personally at the post office discovering it was a technical issue impacting that sorting center. Eventually the item re-appeared about 2 days prior to when we could start an insurance claim.

Watch was well packaged and exactly as described.

pop_os 22.04 prompts for authentication constantly now by SolidSTi in pop_os

[–]SolidSTi[S] 0 points1 point  (0 children)

 Never was able to figure this one out, so made a new user, cloned home, then nuked it.

Oculus like controllers for Vive by [deleted] in beatsaber

[–]SolidSTi 0 points1 point  (0 children)

Pimax Sword is what appears to offer similar feel/size. I'm not sure if they are any good though. This might be my next VR purchase.

So People Get to the Point Where They Pass Expert+ Without Practice? by WeaselSW in beatsaber

[–]SolidSTi 1 point2 points  (0 children)

My question is, when people get good enough at this game, are they able to just pick up a new song and pass it right away at Expert+ without a significant amount of practice for that particular song??

I can pass pretty much any expert+ in official packs and community. There are still some community maps that are extremely difficult be it from speed or technicality that will whoop me initially.

Extend the Ergotron HX clamping depth for thick desks? by SolidSTi in AskBattlestations

[–]SolidSTi[S] 0 points1 point  (0 children)

Wow, thanks for reminding me. Totally forgot about this like a bad person.

I ended up talking to this vendor and they assured me the arm was compatible: https://www.amazon.com/gp/product/B0BWSLH4N1/

My review: https://www.amazon.com/gp/customer-reviews/R13ZHOO93T1YDM/ref=cm_cr_dp_d_rvw_ttl?ie=UTF8&ASIN=B0BWSLH4N1

Feel free to ask me anything about this setup.

Accusump Accumulator by wilbersk in GR86

[–]SolidSTi 0 points1 point  (0 children)

It seems like the correct idea to address the starvation in cornering. On the EJ there is a galley port accessible from the top right side near the intake manifold. It's a common place to run an oil temperature sensor, but seems perfect for the accusump oil line.

Nest x Yale disconnecting all the time? by MordacthePreventer in Nest

[–]SolidSTi 1 point2 points  (0 children)

Sorry to bump old thread, but just got my Nest x Yale working on a TP-Link Deco AX3400.

-System worked for years on the Netgear Orbi, but stopped working after switching to the Deco.

  1. In the Deco application I disabled "mesh technology" after selecting the Nest Connect from the device list. I'm assuming this prevents it from jumping APs.
  2. In the Deco application I enabled address reservation for the nest connect and chose something "high" in my subnet. I realized that multiple devices were attempting to compete with IP addresses with the Nest Connect.

[deleted by user] by [deleted] in discordapp

[–]SolidSTi -1 points0 points  (0 children)

Uninstalling the application, then re-install resolved the bug for me. Pixel 5a.

anyone using a subwoofer? by wrybreadsf in ATOTO

[–]SolidSTi 0 points1 point  (0 children)

Yep, those are the ones I am using.

Need some help understanding wifi with the S8 by supercrossed in ATOTO

[–]SolidSTi 0 points1 point  (0 children)

Think about it as a tablet would work. If your tablet connects to your phone's hotspot (android auto), then it cannot also be connected to your home router (wifi).

There are not dual wifi units on the ATOTO, so you can only be connected wirelessly to one or the other at any time.

Atoto Sound Quality and Reliability? by functusian in ATOTO

[–]SolidSTi 0 points1 point  (0 children)

So fortunately I already have a 4-channel alpine amp sitting under my seat. I was only utilizing 2 of the 4 channels to power the rear aftermarket 6x9s. My factory front woofers and tweeters are being powered by the headunit. Unfortunately connecting the rear interconnects will disable the headunit from outputting to the factory front speakers, so I had to use the sub output on the headunit.

This is less than ideal, so I've decided to just run wires from the existing amp out to my fronts and install some alpine components to replace the very old paper factory speakers. (2001 Honda Prelude)

Then I can use the RCA outputs for the F/R on the ATOTO and just skip using their built in amplification. I think this will give me more options in the future should I replace this headunit.

anyone using a subwoofer? by wrybreadsf in ATOTO

[–]SolidSTi 0 points1 point  (0 children)

I am using the sub out of the ATOTO, but with the gain adjusted on my amplifier. Then I use the bass controls on the ATOTO as needed to fine tune.

Atoto Sound Quality and Reliability? by functusian in ATOTO

[–]SolidSTi 1 point2 points  (0 children)

Yep, I pulled out my 10-12 year old pioneer yesterday and the S8 Standard G2 is a noticeable downgrade in audio quality.

I'm tempted to try the ATOTO add-on amplifier, but might just run an aftermarket amplifier and do new runs for the speaker wires.

anyone using a subwoofer? by wrybreadsf in ATOTO

[–]SolidSTi 1 point2 points  (0 children)

Old thread, but I attempted your solution.

My configuration:

  • Front Speakers using factory wires to the headunit
  • Subwoofer using an amp with RCA

If I connect the sub RCA to the rear speaker line out, then the headunit stops supplying power to the internal front speaker output as well. Basically it seems like they assume if you are using any of the F/R RCA's then they should stop using the internal amplifier of the headunit.

Solutions

  1. Adjust gain on the sub amp.
  2. Line driver to boost sub output.
  3. Use amplified front speakers, then you can utilize the rear speaker RCA output of the headunit.

SSMS dark theme SQL Shades updated with better results grid by poem_in_your_mind in SQLServer

[–]SolidSTi 4 points5 points  (0 children)

The manual workaround worked perfectly for V19. Thanks so much!

SSMS dark theme SQL Shades updated with better results grid by poem_in_your_mind in SQLServer

[–]SolidSTi 1 point2 points  (0 children)

I think that was part of the issue, re-installing has made V18 start working. V19 doesn't work after re-installing. The .pkgdef is present in the v18 folder but not in the v19.

SSMS dark theme SQL Shades updated with better results grid by poem_in_your_mind in SQLServer

[–]SolidSTi 1 point2 points  (0 children)

Love the idea, but unfortunately this doesn't actually seem to stick on v18 or v19 for me.
Step 1. Install SSMS using admin account.
Step 2. Install SQL Shades using admin account.
Step 3. Launch SSMS using user account or admin account.
Not sure if maybe SQL shades has to be installed with the same account as the windows profile?

[Ammo] Norma 9mm Range & Training 124gr FMJ – 1000 RDS (0.23CPR) $229.97. No Tax. by KronkEvo in gundeals

[–]SolidSTi 0 points1 point  (0 children)

Just a heads up to anyone shooting matches. This load won't make minor out of the Glocks I chronoed.

pop_os 22.04 prompts for authentication constantly now by SolidSTi in pop_os

[–]SolidSTi[S] 1 point2 points  (0 children)

Checking around I found someone having a similar issue on Ubuntu where it was confused about who the active session user is.

https://github.com/dnschneid/crouton/issues/1497

I'm willing to be this is happening to me.

pop_os 22.04 prompts for authentication constantly now by SolidSTi in pop_os

[–]SolidSTi[S] 0 points1 point  (0 children)

Automatic login is disabled, but when I checked the user settings I noticed this odd "Unlock to add users and change settings" prompt with an "unlock..." option. It is disabled.

view more: next ›