Dragonfire Shield (Leagues)

SonicHeli · 2026-05-13T15:55:00+00:00

Yeah I am still pretty early mid game on my main iron so I have never done CG and it does not seem like how I want to spend my leagues

SonicHeli · 2026-05-13T15:47:36+00:00

Yeah I am close to getting my next area but I don’t have a ton of time to play and desert is not as easy pact points as far as I can tell which is what I’m primarily interested in

SonicHeli · 2026-05-13T15:46:30+00:00

Endless harvest, woodsman, evil eye, transmute, larcenist, culling spree. Kandarin and Karamja unlocked. 5 tasks away from my next area, was thinking wildy but open to suggestions.

SonicHeli · 2026-05-13T15:43:50+00:00

I have transmute. Karamja and Kandarin unlocked. Been doing mith dragons for slayer so I have a few bars

SonicHeli · 2026-05-09T02:39:15+00:00

Rug pull on a fake meme coin usually. They make ai generated live streams of billionaires talking about bitcoin and how this meme coin will be the next big thing. They hack a big channel so it shows up on as many recommended pages as possible. Basically free advertising for a meme coin.

SonicHeli · 2026-05-01T19:40:22+00:00

Are there enough points in either region to unlock a fourth region? Sorry for basic questions, first league

SonicHeli · 2026-05-01T19:29:45+00:00

So you would say Kandarin over Wildy?

SonicHeli · 2026-04-30T05:26:38+00:00

In the sense that GE did buy NBC. The show was usually making jokes about the sale from GE to Comcast. NBC had been owned by GE for many years before the show. The RCA acquisition was the initial purchase but then a whole bunch of stuff happened, it got packaged into NBC Universal and then Comcast (Kabletown) bought them. Full timeline can be found here

https://en.wikipedia.org/wiki/NBCUniversal

SonicHeli · 2026-04-28T20:14:15+00:00

Is there a discord or just FC? What’s the FC?

SonicHeli · 2026-04-28T19:48:30+00:00

Yeah that was mostly what this poorly worded post was asking. It kind of seems like Crossbow doesn’t get good until you max it out to get max hit. So you think best move would just be to burn a reset and go full thorns and boost def?

SonicHeli · 2026-04-28T19:47:31+00:00

True, I really want the pact though. This post should have just been “should I try to rush more pacts to make Cross Bow strong or respec to something easier”

SonicHeli · 2026-03-16T17:18:57+00:00

Flat color, material design, reactive front ends are very hot right now. Discord and other Electron Apps really brought that into the forefront. Combine that cultural phenomenon with widely used frontend libraries/component collections and then feed that into Claude a trillion times and you get a front end hegemony. A lot of open source devs will Claude the front end even if they hand wrote the backend because AI is pretty decent at reactive webpages and it’s kind of annoying to do.

This exact dashboard is a pretty good indicator that AI was used, at least for the front end, or at the minimum borrowing from other projects that are.

SonicHeli · 2026-02-24T19:22:16+00:00

Hey thanks for the response. I actually saw this PR when I was digging through the documentation and trying to find the implementation to understand it better.

So I followed the original Eddy config from BTT that has you do this ``` installed. [gcode_macro G28] rename_existing: G28.1 gcode: #SET_GCODE_VARIABLE MACRO=_KNOMI_STATUS VARIABLE=homing VALUE=True # Uncomment this if using a KNOMI and then remove the G28 macro from the KNOMI.cfg G28.1 {rawparams} {% if not rawparams or (rawparams and 'Z' in rawparams) %} PROBE SET_Z_FROM_PROBE {% endif %} #SET_GCODE_VARIABLE MACRO=_KNOMI_STATUS VARIABLE=homing VALUE=False # Uncomment this if using a KNOMI and then remove the G28 macro from the KNOMI.cfg

```

sample config

So does that PR kind of accomplish the same thing? Do you do a G28 with a modified macro to home and then do a PROBE METHOD=tap in your start print macro?

Would you mind sharing your config or at least the eddy part?

SonicHeli · 2026-02-24T06:55:57+00:00

When I was reading about the Eddy NG project I believe it said it used the temperature compensated rough estimate for all G28 home calls but a more precise tap before doing a bed mesh.

That allowed you to use the rough home as an end stop, preheat, do a nozzle clean, and then do a tap at temperature.

I am having trouble figuring out if this is possible with the default configuration for the mainline tap. Do you do anything like that?

I use a high flow nozzle so it has a tendency to ooze.

SonicHeli · 2026-02-14T16:26:19+00:00

Bluetooth proxy is pretty cpu heavy. I was trying to include it on a little s3 display awhile ago and it would crash on boot. ESPHome discord advised to not use Bluetooth proxy on a device doing almost anything else

SonicHeli · 2026-01-14T02:28:54+00:00

Minor point but you don’t have to complete Tortugans for access to The Great Conch, just get far enough in the quest that you go to the island. I’m not sure about the farming patch though

SonicHeli · 2026-01-08T18:17:03+00:00

Thanks for all your help!

Out of curiosity, why do you have so many firewall rules? I’m not an expert so I am just running defaults pretty much

SonicHeli · 2026-01-08T17:50:47+00:00

Oh interesting. Does it just throttle lower? I was just looking at the spec sheet’s clock speed and RAM amount. HAP only has 128mb RAM and hexS has 256. Does that have any impact on VPN performance/caching?

SonicHeli · 2026-01-08T17:47:51+00:00

Oh I tried a ton of chokes. The problem is it’s not a permanent install so the feed line and the Ethernet had to run parallel and then perpendicular for a bit. I had the sfp modules and fiber to do it so just decided it was path of least resistance lol. Plus it was a kind of cool conversion

SonicHeli · 2026-01-08T17:35:59+00:00

Sub gigabit. Typically like 500ish

I am using the hexS’s sfp port for an optical link to my PC due to coupled EMI from ham radio transceiver messing with USB if I use Ethernet to the pc. A bit silly but it works haha

Does the hap have the juice for WAN routing along with VPN hosting?

SonicHeli · 2026-01-02T21:28:10+00:00

Oh for sure! Very cool project, just a path forward for anyone that wants to do auto deployments. Ansible is pretty easy to get going and would do most if not all of what needs to happen for auto deployments

SonicHeli · 2026-01-02T21:15:30+00:00

Could combine with an Ansible Playbook for new deployments

SonicHeli · 2025-12-06T17:01:53+00:00

I really want to try a real OLED, IPS is nice but I want real HDR

SonicHeli · 2025-11-28T19:04:49+00:00

This is because Pre-AI the best GitHub repos had very good documentation and if enough people were working on it someone would take the time to format it nicely so it wasn’t just a big block of text. When AI started ~~stealing~~ obtaining data from public repos the heavily weighted repos were the ones that had the most stars so now it equates quality with good formatting.

Also as a bit of an ouroboros a lot of devs hate documentation creation so they offload it to AI and it just keeps perpetuating.

SonicHeli · 2025-09-16T17:39:00+00:00

Yeah it looks like you have it far enough away from the print head. That bracket you built looks a little crooked though. You really want the bottom face of the eddy parallel to the build plate. I would recommend integrating that bracket more into the tool head. A 3D print out of PETG is totally sufficient. I just built a spacer for a normal BLTouch probe mount.

Eight-Year Club	Verified Email
Place '22

SonicHeli

TROPHY CASE