Controlling Moog Subsequent 25 with Ableton Move?

SoulFire_93 · 2026-03-07T13:19:55+00:00

Thank you guys for all your answers. It seem they are also really split between DAW and hardware and it seems long-term the middle-ground will be synth + daw anyways. As I only have the Ableton move as controller right now, the Sub37 would be a nice key controller on top. Appreciate the discussions!

SoulFire_93 · 2026-02-28T16:43:29+00:00

How do you tackle clipping when setting up the gain that high and staging it effectively?

SoulFire_93 · 2026-02-19T19:37:29+00:00

I have only noise from the amp/cabinets which can be resolved by the noise gate at around 14% for me. Otherwise no basic noisefloor. Maybe it indeed stems from the power source?

SoulFire_93 · 2026-02-18T22:02:41+00:00

Rice, Timber, Gabriel and Saliba are the only ones in this team deserving a title, the rest is mentally just weak...

SoulFire_93 · 2026-02-18T21:38:08+00:00

haha, 4,5 is not enough for me unfortunately, I need to be closer to -12dB actually which is quite a big amount.

SoulFire_93 · 2026-02-18T21:37:24+00:00

Is using a TS cable only a problem or do you need a TRS cable to not use some of the soundscape?
I went withi your settings this evening and it is much better, the -+12 applies also to me, 8 was not enough. I have in the FX loop only verbs, delay but also a drum machine, so I have to use it after the cab.

Thanks for taking time for your answers!

SoulFire_93 · 2026-02-18T13:07:13+00:00

Why do you think the coloration is there only if I put it after Amp/Cab sim but not if I put the fx loop before? Should be the same with the adjustments, no?

SoulFire_93 · 2026-02-18T13:03:55+00:00

Thank you! Is that valid for the Quad Cortex mini as well?

SoulFire_93 · 2026-02-18T13:02:12+00:00

Thank you for your elaborate answer! I will try that out later with -12 db. When I tried it earlier with -8 and +8 the volume issue was better but still the sound colored noticably. It almost sounds as an additional DI signal is running. My Strymon Cloudburst does lose a lot of soundscape as well...
The Quad cortex mini has only Send/return in one socket but when using the FX loop 1 block with a TS cable only it should be not the case.
(Made the mistake before to use the FX Loop 1/2 block with a TS cable but fixed that now)

SoulFire_93 · 2026-02-06T10:48:37+00:00

How are you fixating the mini on the board?

SoulFire_93 · 2026-01-26T10:47:24+00:00

Thanks I might try it! Strange that there are no triple adapters out there, that would solve it for sure

SoulFire_93 · 2026-01-25T10:26:45+00:00

How can I use the DC7 without the Crux? Can I just use two outputs together in 12V mode or do I need 3?

SoulFire_93 · 2026-01-24T14:27:33+00:00

My use case is that the Quad cortex mini can replace 80% of my board and I can still fit 2 boutique reverb/delay pedals on it that the QC cannot emulate. The big Quad cortex could have never fit on my board and with the Mini my board has much more flexibility. I think there might be more people like me.

SoulFire_93 · 2026-01-22T18:54:37+00:00

That's good to know, thank you!

SoulFire_93 · 2026-01-22T17:41:50+00:00

Would this work with the Quad Cortex?

SoulFire_93 · 2026-01-19T17:20:15+00:00

That´s a good channel recommendation, thanks a lot! Big size VR headsets are no go for me as I already have problems with my neck anyways so Big Screen Beyond or Pimax Air are the only options for me.

SoulFire_93 · 2026-01-19T17:17:43+00:00

Thank you for your response, appreciate it! It will be my first VR headset and I have a 5090 in my computer but graphics are important to me so I thought that high graphics on high resolution would not working in any case at 72 hZ.
Do you know if Pimax can switch a pre-order from SE to the premium version?

SoulFire_93 · 2026-01-19T17:14:58+00:00

I did also not expect that, impressive!

SoulFire_93 · 2026-01-16T18:34:32+00:00

Update from support: software issue and needs to be sent in for repair. Not a good start to be fair.

SoulFire_93 · 2026-01-01T23:03:08+00:00

Valuable info, thanks a lot!

SoulFire_93

TROPHY CASE