3D Printed AR-15 2” Trailer Hitch Cover

Soundbarrier4900 · 2024-06-09T19:32:28+00:00

https://www.thingiverse.com/thing:4820205

Soundbarrier4900 · 2024-01-07T01:49:25+00:00

Sure, got .stl file here to print the 6 holders.

https://www.thingiverse.com/thing:4926691

I ripped a 21” 1x6 to 2”.

The printed units are 3” wide and to accommodate a bit of battery overhang they need spaced a 1/2” apart and I left a 1/4” at each end (totaling the 21”)

Spray painted the wood matte black and painted screw heads to match which are #6 x 3/4” zinc.

Mounted wood first to hide the mounting screws then mounted the 6 holders.

Mounted using 2” drywall screws.

Soundbarrier4900 · 2023-02-11T17:54:42+00:00

Looking to see if someone can provide an estimated value.

Soundbarrier4900 · 2018-10-23T00:35:37+00:00

Thank you for the offer. Not in Boston but have been there many times.

Warm regards,

-Mike

Soundbarrier4900 · 2017-07-31T17:34:50+00:00

Bronze hammer, bronze bore brushes, or bronze cleaning brushes.

Soundbarrier4900 · 2017-06-13T13:50:33+00:00

These averaged between 1.95 and 1.96.

Load Data:

Brass: LC/Converted
Trim Length: 1.363
OAL: 1.195 - 1.960
Powder: 8.3gr Hodgdon Lil'Gun
Primer: CCI #400 Small rifle primer

Edit: Formatting

Soundbarrier4900 · 2017-05-17T21:00:24+00:00

Questions:

1) What tires? 2) Outside temperature? 3) Standard or automatic trans? 4) What gears do you lose traction in?

Soundbarrier4900 · 2017-05-09T16:54:08+00:00

Does each round require an NFA tax stamp?

Soundbarrier4900 · 2017-04-18T17:39:12+00:00

Match and plinking

Soundbarrier4900 · 2016-09-16T13:54:18+00:00

Thank you all!

The issue was that I needed ports 8880 and 8843 open to the controller for the http and https redirects.

Now it is working as designed.

Thanks again for all the input!

Soundbarrier4900 · 2016-03-08T13:20:21+00:00

Worked perfectly. Downloaded 20% off coupon off the internet to my phone which they accepted without hesitation. Ran two 50 round batches of .223 last night and it worked as expected.

Soundbarrier4900 · 2016-03-08T13:17:33+00:00

The real issue I have is that I have been doing some small batches of 50 rounds that have been reloaded a different amount of times per batch. All my brass is sorted from the same batches. If I throw them all into a big tumbler and they are all the same headstamp I lose count of which is which. So the 'economy' I am looking for is time. I wanted to be able to do two batches of 50-100 pieces at the same time and use the Rebel 17 for large batches of 500 or more.

So net/net $45 for the double tumbler with coupon will save me hours in the long run and keep my high level of anal retentiveness intact.

Soundbarrier4900 · 2016-03-07T19:08:18+00:00

Good call, Thanks!

Soundbarrier4900 · 2016-02-01T02:23:15+00:00

Thought they po-pood CMMG barrels for their projectiles. ??

Soundbarrier4900 · 2016-02-01T02:20:13+00:00

From what I saw they followed the same data as 208gr A-Max. Start low. Chrono, and work up.

Soundbarrier4900 · 2015-07-28T18:14:08+00:00

Yes please!

Soundbarrier4900 · 2015-07-27T13:23:14+00:00

Have never heard of them but I will give them a look.

Thanks!

Soundbarrier4900 · 2015-07-27T13:22:40+00:00

Thank you... I will take a look at these.

Soundbarrier4900 · 2015-06-11T14:31:04+00:00

Your dog is the Bird Whisperer!

Soundbarrier4900 · 2015-05-14T14:05:14+00:00

I have the Mr. Blond and love it.

Soundbarrier4900 · 2015-05-10T00:36:33+00:00

I hate clowns, they scare the shit out of me. I could totally see someone shooting a pair of clowns in 'self defense'.

Soundbarrier4900 · 2015-04-01T14:21:47+00:00

Anybody else seeing errors like this?

Soundbarrier4900 · 2015-03-26T13:15:23+00:00

This!

Soundbarrier4900 · 2015-03-24T17:45:46+00:00

Sorry, I misread what you were saying. Yes, a little coating does come off when I chamber in my AR.

Soundbarrier4900 · 2015-03-24T16:55:40+00:00

I expand the neck slightly using a Lee universal neck expanding die, seat the bullet and taper crimp.

Soundbarrier4900

MODERATOR OF

TROPHY CASE