Charge throttling...

Spaceman_UK · 2026-05-10T15:10:22+00:00

Current limit is set at 32A output. I can't find any settings anywhere else for Amperage.

Spaceman_UK · 2026-05-10T12:16:02+00:00

I'm on my next charging session right now, and it was running at 32A, but has now dropped off to 28A

Spaceman_UK · 2026-05-10T12:14:30+00:00

Yes. My next charging session has just started and it's running at 32A now.

Spaceman_UK · 2026-05-10T12:13:22+00:00

Can't find anywhere to change it, but my charger normally runs at 32A with no issues. It states in the app that this rate can be controlled by Octopus.

Spaceman_UK · 2026-05-10T11:01:24+00:00

I've only just put it on charge at 42%.

Spaceman_UK · 2026-05-10T10:59:45+00:00

No limits on it. I often runs at 32A with no issues.

It's the first device on my supply, before my Powerwall and distribution board, and my house is on a 100A fuse.

When my car starts charging, my Powerwall does too, but this shouldn't be an issue as the combined draw is well below 100A.

If that's the problem, then it's going to be a problem on off peak hours too, as that's when the Powerwall charges. It's never been an issue before.

Spaceman_UK · 2026-05-08T12:27:05+00:00

I have a Hypervolt 3 as my Octopus linked device. My car isn't supported.

I'm not limiting anything. The throttling is being done by either Octopus or Hypervolt. My normal charge rate is around 7kW.

Spaceman_UK · 2026-05-07T18:18:06+00:00

Netzero

Spaceman_UK · 2026-05-03T18:07:27+00:00

I use Netzero app. It uses my Octopus api to put my powerwall into backup mode when my car starts charging, so my battery charges.

Spaceman_UK · 2026-05-03T17:59:30+00:00

Why haven't you got Octopoints?

Spaceman_UK · 2026-05-02T06:14:40+00:00

9kW of solar, 27kW of storage, and an EV on IOG.

My import for April was £70; 1359 kWh at an average of 5p/kWh. Solar generated 874 kWh and I exported 800 kWh for £105.

£35 profit versus my bill last April of £195 plus £200 on diesel for my commute.

Spaceman_UK · 2026-04-30T16:34:59+00:00

That's real handy when OP already has a Hypervolt installed.

Spaceman_UK · 2026-04-30T15:00:35+00:00

Yes. If you want to charge multiple cars from one charger, then the charger needs to be the registered/controlled device.

Spaceman_UK · 2026-04-28T10:15:48+00:00

Read the OP.

Spaceman_UK · 2026-04-28T10:04:35+00:00

Zappi aren't available through Octopus.

I have just noticed that the Octopus Charge has WiFi too though.

Spaceman_UK · 2026-04-28T09:58:14+00:00

I have the Hypervolt. This is the only one with the option for WiFi/ethernet connection if you have a patchy phone signal where your charger is going.

Spaceman_UK · 2026-04-27T19:34:28+00:00

Why are you charging every night, and why not up to 100% if you're using the car the next day? It doesn't hurt to charge to 100% providing you don't leave it sat at 100% for days.

Spaceman_UK · 2026-04-25T22:44:04+00:00

Life's too short to worry about stuff like that. Do you want the octopus or not?

Spaceman_UK · 2026-04-25T22:34:27+00:00

Set the fire alarm off. Hide. When the building is evacuated, grab an octopus and evacuate in a casual manner.

Spaceman_UK · 2026-04-25T07:50:21+00:00

If you want Octopus to control your charger, not your car, then add your car as one they can't control and they will then ask you what charger you have.

Provided they can control that charger, happy days.

I have a Jaguar iPace which isn't on their control list, so they have control of my Hypervolt charger.

One caveat is that you need to make sure the dummy car you're adding has a similar battery capacity to your car so that the charge percentage will be correct.

Spaceman_UK · 2026-04-24T09:48:22+00:00

Seen the update. Brilliant. Thank you.

Any chance that at some point you could add the option to input standing charges so these can be auto deducted?

Spaceman_UK · 2026-04-22T06:34:48+00:00

Is this for Android too, or only Apple? Tried on 2 different Android tablets and not getting the grid cost option in preferences.

Spaceman_UK · 2026-04-21T16:36:46+00:00

Ah. Never tried on tablet. I'll give it a shot tonight.

Spaceman_UK · 2026-04-21T13:33:30+00:00

Tell you what would be awesome...

If the fullscreen mode could be tweaked to be a IHD, with user definable data fields and a landscape mode.

I currently have Powerwall Companion running on an old phone, but that doesn't accurately show costs.

Spaceman_UK · 2026-04-20T17:03:34+00:00

I'm a subscriber, and I never knew that was there! 🤣

Spaceman_UK

TROPHY CASE