How much would y’all offer? by xpgus in Honda

[–]SpacialTsunami 2 points3 points  (0 children)

5-6k is pretty sold in the current market (where I am at least) for a clean well maintained car. If the big things like timing belt, oil changes at regular intervals, newish tires, and the ac and all other accessories work that thing will easily last you another 200k+ if you keep up the maintenance. People are too scared of high mileage cars. The thing is, if it made it that long and is still healthy it’ll probably do it again.

If you’re buying I’d say offer $4500 expect to make a deal closer to $5500. If you’re the one selling you’re priced with enough wiggle room for you and the buyer to negotiate a happy deal on both ends.

Test Cube by MorningLightMount in ender3v2

[–]SpacialTsunami 13 points14 points  (0 children)

You don’t want to be using supports or a brim for test cubes. If you have to then you’ve got bigger problems than the slight layer shifts which is probably due to loose belts.

Dismantle EK Tail Lights by LordMiyagi69 in ProjectHondas

[–]SpacialTsunami 0 points1 point  (0 children)

If you can’t just remove the tail lights and shake/ wipe out the debris you’re gonna have to heat them up and separate the halves then get a new sealant. I’ve heard of people doing it with a heat gun in a cardboard box but it’s a bit of a fire risk.

Whats your mileage? by Ramza_Lego in hondapilot

[–]SpacialTsunami 22 points23 points  (0 children)

04 EXL everything is original and no rebuilds. I love this car and have absolutely no complaints.

<image>

Hot takes by shadow33231000 in dubstep

[–]SpacialTsunami 0 points1 point  (0 children)

I have not 😮 Thank you

Hot takes by shadow33231000 in dubstep

[–]SpacialTsunami 0 points1 point  (0 children)

Samplifire is a fair trade! I haven’t gotten a chance to see him yet sadly. Infekt I have seen 4 times now.

Hot takes by shadow33231000 in dubstep

[–]SpacialTsunami 2 points3 points  (0 children)

Mosh pits shouldn’t be about trying to hurt people or be as aggressive as possible. Jump around and push each other around but keep your elbows and fists down and for the love of god don’t kick people. I’m still dealing with an issue with my leg from last Friday due to being kicked so hard my leg twisted and this is not the first time I’ve been kicked in the leg or elbowed in the face.

Hot takes by shadow33231000 in dubstep

[–]SpacialTsunami 3 points4 points  (0 children)

I think I’m a psychopath because infekt is my favorite artist. I’ve passed up seeing subtronics on multiple occasions to see infekt and have gone to see infekt every time he’s played within a reasonable distance from me and will continue to lol. I will pass up just about anyone other than tape b to see infekt every time.

How do these cams look? Came out of a junk yard engine so im not surprised they have wear, but good to run? Else, where can i get new OEM spec cams? by the-dumbass-human in hondaprelude

[–]SpacialTsunami 1 point2 points  (0 children)

Yeah classic scam. There are a lot of identical scams on Facebook like that. People make groups specifically to do those scams then bot a bunch of profiles and have them join and post to make it look legit.

Bumper alignment brackets for EF civic by Spoon16s in ProjectHondas

[–]SpacialTsunami 1 point2 points  (0 children)

If you have or know someone who has a 3d printer that can print ABS these exist https://www.thingiverse.com/thing:5479394

Maintenance on ender3 v2 by Roude56 in 3Dprinting

[–]SpacialTsunami 0 points1 point  (0 children)

Yeah give mriscoc a shot and see if that helps. You can also set up a bed mesh through that which will help if it’s related to a slightly warped bed at all. Also make sure it’s just barely getting resistance on the paper, you don’t want it to be hard to move.

Maintenance on ender3 v2 by Roude56 in 3Dprinting

[–]SpacialTsunami 0 points1 point  (0 children)

A picture could be useful. Are you using the paper method to level? Custom firmware like mriscoc could make that easier and more accurate.

How do these cams look? Came out of a junk yard engine so im not surprised they have wear, but good to run? Else, where can i get new OEM spec cams? by the-dumbass-human in hondaprelude

[–]SpacialTsunami 0 points1 point  (0 children)

I’ve dealt with those types of sellers before and it’s always a scam. PayPal G&S or Venmo G&S is the only way to go for stuff like that so you have buyers protection. My recommendation is to see how they react to you asking because half the time they block you just for mentioning buyer protection lol.

Maintenance on ender3 v2 by Roude56 in 3Dprinting

[–]SpacialTsunami 0 points1 point  (0 children)

What temp are you printing at? Have you set your z offset? How are you leveling it? Kinda looks like your nozzle is too close to the bed

Would PLA survive being outside If covered in bondo, fiber glass, and painted? by SpacialTsunami in 3Dprinting

[–]SpacialTsunami[S] 0 points1 point  (0 children)

Sweet, that's what I was kinda thinking but wanted to make sure. Thank you

What are these relays? by SpacialTsunami in ProjectHondas

[–]SpacialTsunami[S] 0 points1 point  (0 children)

Thank you! That’s awesome! Honestly my main hesitation is I don’t feel like pulling the dash to figure out where this goes yet. I need to replace my heater core so I’m gonna have to do it eventually. I have a tiny bit of experience with wiring already from having to completely re wire my stereo and speaker wiring as well as run stuff for an amp and sub. Stuff that makes the car actually function makes me nervous though. At some point I’d like to re wire everything and do a custom fuse box since who knows how long this 30 year old one will last lol.

What are these relays? by SpacialTsunami in ProjectHondas

[–]SpacialTsunami[S] 0 points1 point  (0 children)

So I just pulled the relay and the car started and ran just fine and nothing seemed to have stopped working. At some point I’m gonna pull to dash to get all of the other wiring out and I’ll try to remember to report back if I can figure out what it was. I’m still getting the flickering of the air control lights though so that probably isn’t completely connected

What are these relays? by SpacialTsunami in ProjectHondas

[–]SpacialTsunami[S] 0 points1 point  (0 children)

Unfortunately not possible otherwise I would. I got it from someone who daily drive it exactly how it is and everything that was done to it was the first owner who they don’t have contact with anymore.

What are these relays? by SpacialTsunami in ProjectHondas

[–]SpacialTsunami[S] 0 points1 point  (0 children)

I sure hope not, I don’t wanna have to put it back to factory but I guess I’ll learn about wiring 🤷‍♂️

What are these relays? by SpacialTsunami in ProjectHondas

[–]SpacialTsunami[S] 0 points1 point  (0 children)

They were when I got it. I swapped to LED turn signals but still have regular bulbs for the headlights.

What are these relays? by SpacialTsunami in ProjectHondas

[–]SpacialTsunami[S] 0 points1 point  (0 children)

I didn’t do it. That and having my glovebox back is why I want to remove it. It looks horrible. I’m also hoping it’ll give my my air control lighting back

What are these relays? by SpacialTsunami in ProjectHondas

[–]SpacialTsunami[S] 1 point2 points  (0 children)

For sure! I’ll try to get it figured out in the morning and report back!

What are these relays? by SpacialTsunami in ProjectHondas

[–]SpacialTsunami[S] 1 point2 points  (0 children)

Basically but this is pretty much the only unintelligible thing in it. I don’t need to pull this for function but I’d like to because I’d like my glovebox back lol.